I have a report on this report there is a Destination City field and a Current City field, loaded from a table. I have a command button that loads a form to filter on the destination city, I have another command button that loads a form to filter on the current city location.
What I would like is, when I use the form to filter the destination city, then load the form to filter on current city, I want the listbox on the form for the current city to only list cities that are associated with that destination. Both form listboxes have the rowsource from the same table, just different fields. Is this possible?
I have a report based on a query, the report loads filter based on dates input to the query from Form1 when report loads. I want to filter this report further from a listbox on form2, but I want the listbox rowsource to populate based on a field in the loaded report. Is this possible?
I'm using pbauldy's code to filter a report by a multi-select listbox. The only issue is..how do I include more (7 to be exact) listboxes to the code? It seems the OpenReport vba is only allowing 1 where clause?
Code: Dim strWhere As String Dim ctl As Control Dim varItem As Variant 'add selected values to string Set ctl = Me.VP_ListBox
I use the follwing code to filter a report based on the listbox selection on a form. Below is the code I use, the problem it will error if the results have an apostrophe in the string.
Private Sub FilterDesc_Click() Dim strWhere As String Dim ctl As Control Dim varItem As Variant 'make sure a selection has been made If Me.ListCarrier.ItemsSelected.Count = 0 Then MsgBox "Must select at least 1 Carrier"
I have a listbox inside name of workers which is coming from table (Workersdetail) on the otherside I have report from the same table which still showing all records of worker, this report execute through the form and by selection of listbox values. look into my following codes.
Dim strWhereworker As String strWhereworker = "workername = Forms![workermenu]!workerslist"<--(Workerlist is the name of listbox) Select Case Me!reporttoview Case 3 'DoCmd.OpenReport "workerindividual1", acViewReport, , strWhereworker
Problem is, in the report all workers with related values showing while I want to get only the worker name I select from the listbox, I could not understand where I made mistake.
How can I pass data (an employee's first and last name) to a report ? I captured the employee's name from the listbox, but can't seem to pass it to the report. The desired report will only have the employee's name and records for related fields on the report. The table (contains emloyees' history data), form name, listBox (contains employees' names), and variable (contains the employee's name) are listed below.
Now I have coded what I think should work for my listboxes and it does not. When I click it does nothing. No processing of anything.
I have 11 multi-listboxes and want to collect what the user selects from each one and then use it to run my query. The query only uses 4 of the listbox items and then 4 other items that I have in the query. I want to be able to display this in the same form or perhaps a subform. Here is my code:
Code: Private Sub command8_click() ' Update the record source If BuildFilter = "" Then Me.frmQual_Sub.Form.RecordSource = "select * from qualq1 where " & BuildFilter End If
I wish to filter the records in a listbox by using checkboxes.
The listbox (list1) and the checkboxes are in the same form (form1)
The listbox displays the records from a query (query1) related to a single table (table1).
Each record (assuming a list of videos) has a field called "Typology". The "video typologies" are: Movie, Documentary, Animation. So the table1 has a column called "Typology" which displays one of the three typology in simple text.
When entering a new record (in a specific form) user can choose the typology selecting an option in a combobox. The combobox is a "value list" one and I wrote the typologies in the "row origin" line: "Movie";"Documentary";"Animation"
So we have a single column in simple text for all the typologies, but limited choiches.
So far everything is working well.
Now I wish to filter the records in the listbox by typology. Each typology should be related to a checkbox, so when I check a checkbox then the listbox returns only the records form a specific typology. Also, I wish to check more then one checkbox in order to display records from multiple typologies rather than one.
I've already made a button which resets the form, displaying once again all the records and eventually unchecking all the checkboxes.
About option buttons: I've managed filtering the listbox results using option buttons in a frame (option group?) and it works fine, but in this way I can choose only one typology at a time (and the typology field in the tabel1 of course is not simple text, but numeric: 1=Movie, 2=Documentary etc).
I thought this could be solved using the click event on each checkbox:
-If the checkbox "Movie" is checked then the listbox shows only the records which have the text "Movie" in the Typology field. Else, show all the records. -If the checkbox "Documentary" is checked then the listbox shows only the records which have the text "Documentary" in the Typology field. Etc......
I am currently working on a form for my users to look at budget data. I have several listboxes for them to filter queries by. What I was wondering is, if it is possible to have data in one list box be filtered by the preceeding listbox?
For example: Three list boxes: Report_Period, Budget, Dept.
Each list contains all the values possible. This data is all in a filter table (and the listboxes created using SELECT DISTINCT queries to that table for the specific field). So, if I select Budget XYZ, could I filter the Dept listbox to only show the dept.'s associated with that budget? These are all multi-select listboxes by the way, so budget ABC and XYZ would only show the departments associated as well.
I have a report based on a query.There is a field in my personnel table and the query: [Field] with values from my lookup table and has three choices:
1-Inspections 2-Administrative 3-Safety..
I have a report and would like to filter based on [Field].I can filter by putting [Field]=Inspection on the Filter On Load, then typing 1 into the parameter box. And it works.I cannot however choose more than one of the three choices and I have to type the number in. Fine for me but it won't be for other users.it is used for more than one report. I would also like to avoid having seperate queries for all these reports.In other words, I would like to filter the report, not the query.
I have a report containing all the fields from my "main table". I want to create buttons on a from that will filter information from the report. For instance, I have a field titled "Priority". I want to create a button that will filter the report to only show records with a "Level 1" priority. Is there anyway I can do this using VBA?
I have following table, forms and reports in my access database:
Tables: 1- maintbl Query: 1- mainquery based on maintbl Forms: 1- Input or mainform based on mainquery 2- unbound form: to Filter report Report: 1-mainreport based on mainquery
Objective:
I want to filter report on followings: Name(Text) Month(Text) Year (Number)
I have 3 combo boxes on ubound form and want to filter report based on three above mentioned criterias.
I made a report that show a list of data where there is a date. It sorts the report by year then by month.I collects the information about the date from a field in a table where the whole date is inserted (example28.12.2014. (date/month/year)).What I want is to make a combobox or a listbox where you would chose a year you want it to show you the report for and a button that would open the report.So to make it clear in a form you would have a combobox where years would be displayed (and i would like the combobox to somehow know what years are inserted in the table), you select the year and click on the button that would open the report for that year.
The report name is "rptClients". The table from where the data for report is taken is "tblCustomers" and the field where the date is in the table is called "DateOfUse".Also in the report the date is in a field called "DateOfUse" also.
In my report I have a field called "Packages" and my subreport consists of a table, one of the columns is "Packages" so I want to use the value that I have in "Packages" to filter for only those items in the sub report.
I have a report filter that filters the reports by month and year:
Code:
DoCmd.OpenReport "AttWholeCity", acPreview, , " Month = '" & txtCourseDateMonth & "' AND Year = '" & txtCourseDateYear & "'"
I want the code to also show these two columns where there are null/blank values aswell, for example if I filter by apr 2015 i want the report to show these columns as well as blank columns is this possible
I'm using the following code to filter a report by using a multi-select box.
Code: Private Sub cmdOpenReport_Click() On Error GoTo Err_cmdOpenReport_Click
Dim strWhere As String Dim ctl As Control Dim varItem As Variant
[code]....
I have a report that contains a subreport. The report is simply an image of a word document. The subreport will contain the actual data.When I open the subreport, the IN query works perfectly. When I open the main report, I only get the first record listed in the IN query. I have the master/child links set properly.
I have a report, rptAllCSCS which is based on a query qryCSCS2...
One of the fields in qryCSCS2 is Status and each record is either "Current" or "Not Current"...
My report is being viewed via a navigation form, so one of the tabs says CSCS and when clicked the user can see the report...
I have added a button in the report header which when clicked opens the report in print preview so the user can print the report. (Done with a macro in the On Click of the button.)
I would like to add a combo box cmbStatus which has the values "Current" and "All" in the report header. (Current will show only when the Status field = Current and All shows all records so Current and Not Current together). This will act as a filter for the user to see the corresponding records and they can then press the print button or just view on screen.
I haven't worked with filters before except when you specify the criteria in the query and point it to a control on a form which then opens the report... As this report is already open I'm having trouble, as well as specifying the "path" when something is in a navigation form being a bit tricky...
I have a report with 2 option groups, I cannot get both of them to filter the data simataneously, they will each inititally filter the data, but when the opposite group it clicked, the previous filter data does not remain filtered. I have posted the code for the two option groups, I know I'm doing something wrong.
First option group code: Private Sub Frame43_Click() Select Case Me.Frame43.VALUE Case 1 Me.Filter = "allowable_weight Like '263000'" Me.FilterOn = True
My problem I am having is that in my database you can click around to different customers info on forms and from there you can click on a button to get to another form that lists all of the customers vehicles. From there I have a billing report that I created and I am trying to filter the report to get what I want on there.
I have been searching around and have found codes to filter reports so that right now I have it when I click on Billing Report it filters by the customers form i am on. But now where i am having some issues is that I am also looking to filter by a yes/no field so that anything clicked yes for that customer will be filtered to show on this report.
I have a database which have tbl1 with field admission year with data like august/2007, august/2008. i have entered all data with form1. My problem is that i want filter report. user click a button so a form opened and than he entered data in a text box like august/2007 when he click on show report button only those pages which have august/2007 text will display in report. second time when user change text like august/2008 in text box report also show changes.
I am using a form to filter information so that I can open a report. The report displays information pertaining job costs. Each month the company I work for records their labor, costs, and travel in a form with a year to date amount. Right now, I am having a problem opening up a report for one specific job and a specific month. So what I want the dialogue box to do is to pick from a list of jobs then pick from a list of months, click a button that prompts a preview of the report.
The data the query pulls is employee name, course ID, course name and course completed date. I have added criteria in the query that asks for the Course ID to filter on a given course and a dynamic field in the query AnnualReqDate: DateAdd("d",+365,[TrainingCourseCompleted]). What this returns is a list of employees that have completed course X the date they completed and the date (12 months) when the course is due. This works great, have created a report that reflects this very well.
The issue comes in when I try to add the ability to filter by date range on the AnnualReqDate dynamic field. the AnnualReqDate dynamic field does not exist until the query is run the Between [Start Date] And [End Date] criteria add to the AnnualReqDate dynamic field wont work.The query fires off but returns zero records.
I have a report [Report1] that gets its data from a query [Query1]. On [Report1] there is an unbound text box [EnterEndDate] that I want to use as a filter for the report criteria, and have it filter the report to show every report row with the value in the [EndDate] field greater than what the user entered in [EnterEndDate].
There is no need to save the value used in [EnterEndDate]. It will be entered after the report is run and changed on demand while the report is open for the user to see different date ranges.
I am using MS Acess2000 and need to make a report that will be passed around with production work. My primary key is the invoice number of the work order. Currently to open an invoice i have a macro, attached to a query with the following qualifiers; Like [Enter invoice]
This pulls up the current record fine. for the form and flags the folloing in the property filter sectin of the form
(((([CustomerTableMasterRef].[Invoice]) Like [Enter invoice])))
PART 2
Now I am trying to use microsofts how to filter a report using a forms filter... This picks up on the Invoice query as shown above but does not just insert the query results...
Is there better code or another way to approach this... Currently i am using:
Name:cmdOpenReport Caption: Open Report OnClick: [Event Procedure]
Private Sub CmdOpenReport_Click() If Me.Filter = "" Then MsgBox "Open an Invoice First" Else DoCmd.OpenReport "rptCustomers", acViewPreview, , Me.Filter End If End Sub
Using this code not only does my report not detect the correct fields to import data (no data is filled in) but it requerys the invoice or atleast should, which I could do with out all of that code...
I am quite new to Access and have been working with a sample DB from Microsoft. I have been looking for some ways to filter a report based on the values in some comboboxes, and have followed the instructions on a website (can't post link yet).
I also looked at this file (**can't post link yet**) and it seems like everything works fine here. So I started a new DB with my own table, and tried to do the same thing as in this file.
Everything works fine.
But when I try all these steps in my own DB (the sample DB from Microsoft), it doesn't work.
When I filter by "Status" (f.ex: "In Progress" or "Not Started"), it seems to work fine.
However, when I filter by "Assigned To", I get the following error message: "Data Type Mismatch in criteria expression". So I googled this error message , but this field has nothing to do with any date formatting.
It gets even stranger when I try to filter by "Project":
Then a new pop up appears and asks me to enter the "Project".
