Reports :: Getting Sum In Dynamic Cross Tab Report
Jul 28, 2013
I created a dynamic crosstab report with 4 unbound fields in the details section and 4 unbound fields in the header section, which all work perfectly well. The crosstab query contains 17 columns. The last 4 columns contain the values I need to take the sum of. I have put some code in the open event procedure of the report.
Private Sub Report_Open(Cancel As Integer)
Dim rs As DAO.Recordset
Dim db As DAO.Database
Set db = CurrentDb
Set rs = db.OpenRecordset("Select * from Que_ProjectUren_Sel_Dept_Test")
I have made a cross-tab query which works fine. I also have made a report which is based on this cross-tab query. Due to nature of the cross-tab query the Value column(s) is dynamic. The report I made is based on all available data types (columns). The report works if all data type is available but the report fails if some of the data types are not available (i.e columns are missing due to not having any value or data). I hope I am explaining this correctly,
Is there a way I can use expressions in the report to place a conditional clause that if the Control Source doesn't exist place a Null or 0 in the report or in its place.
I understand that I can't set multiple "values" in a crosstab query but I need to have both a UPC and a price display in a report(Price List) for Our Exotic Wood selections like so:
I have 2 crosstab queries one that gets the price and one that gets the UPC I can join them and get it to print on every other line but there is no way that i can find to print two lines at a time in a report so my question is there a way to achieve the outcome described above with two crosstab queries? do I need more queries or a different kind of query?
I want to present some data in what seems to me like it would be a very natural and normal format, however have so far been unable to figure out how to do it.I record attendance data for a children's after school club in a table as follows (simplified):
AttendanceID - autonumber AttendeeName - text AttendanceDate - date Attended - True / False
The data looks like this in the table. I would like to be able to easily see who attended on which days, so I would like to therefore see the data laid out like this:
The Crosstab query looks almost like it would do what I wanted, however it seems to insist on adding something up, rather than just showing me the value true or false.
I have a dynamic cross tab query - thus the column headings will change each time it is run.
At present the column headings are displayed in alphabetical order - how can I change this so they are based on a different order - eg by the descriptions corresponding ID
I have a crosstab Query as the source for my report, of course the issue is the column headings on the report. I have Purchasers as a row heading, Year as a row heading, Month/Year as a row heading, Meter as a column heading, PaidMCF as Value and, a total as a Row heading. My issue is feeding the column headings on my report with the meter names.
Purchaser 1 has 23 meters attached Purchaser 2 has 1 meter attached Purchaser 3 has 6 meters attached Purchaser 4 has 2 meters attached Purchaser 5 has 16 meters attached Purchaser 6 has 11 meters attached.
I'm currently creating an invoicing report for a company, and for record purposes they need a dynamic field on the report for the specific Invoice Number of each client they invoice. I have the field set up currently as a text box =[Invoice#] so they have to enter an invoice number when they generate the report. However, when I generate the report and put in a number, I'm getting some whacky outputs.
For example, I've tested it with a test client, and when I give the client an invoice number of 1, the report somehow changes it to 49.
I've made a crosstab query and would like to use it to create a subreport. In the column headers I have names of courses. Courses can be added or removed. How can I make a crosstab report with dynamic columns?
I have a form that shows a list of all of my records in my database. I want to be able to click a button called "Report" and have that print a report that has all the records I have filtered on my form. I have a report in the format that i want it in, however, currently it prints every record and not just what is shown on my form. (The form is dynamic and I want the Report to be dynamically based on the form) HELP PLEASE!
I am trying to create a cross tab query which will output the data for only three months starting from the recent month. I would want these months to be heading. However, I don't want to create reports over and over again. I want something, that will resolve the issue through parameters kinda thing. I don't know, if this can be done or not. Right now I have the cross tab query for all the months, but I have to manually choose the months to fit in the page. I hope I am making sense here. I didn't know where to post this, in query or in report. Therefore, I am posting it here.
hi, i'm having a problem making my report dynamic, i have a query which returns the payments due in the next month, my question is, if i have a form based on this query, how can i make it so that, if i need to print an invoice for one of the customers, lets say the currently displayed record, how can i limit the customers displayed in that report (invoice) to just the current record that i want the invoice for?
I have 12 months' worth of data that the user wants displayed on a crosstab report. I have no problem creating the crosstab query or subsequent report. However, the user wants to be able to select their own 12 month time period. So, my crosstab is based upon a make table query, that will allow the user to enter parameters. Now, my problem is that these 12 month column headers/data will change as the user enters different date ranges. How do I write the code that will allow me to pass these variables to the report? I'm using 97. Thanks!
I have a form with payment information and need a list, what date the payments are due. These can be only 2 or 3 payments up to maybe 24 payments. The result I want is something like this:
Date Amount Total paid 1.7. 500.00 500.00 1.8. 500.00 1,000.00
The list itself is not a problem, but I need a list who only shows the number of payments as agreed, 2 lines (with paydates) if 2, 12 if 12 payments. I have the information of the total amount, the number of installments and the first payment date.
Hello to all, I created a dynamic report based on cross tab query, the header is a sub report. Number of lines and rows depend on the data typed in a form. Here is my problem. When numbers of rows exceeds for exemple 15 the header and detail line continue on the line below i would like the report continue on another page (see below).
I am using the following cde to generate a Dynamic Crosstab Report. I can get the column labels to work but Ican't get the values to appear in the detail section all I get is #Name? I am using the following code in the report
Private Sub Report_Open(Cancel As Integer) Dim rst As DAO.Recordset Dim db As DAO.Database Dim i As Integer Dim j As Integer Set db = CurrentDb Set rst = db.OpenRecordset("select * from test2") rst.MoveFirst j = 0 i = 0 For i = 0 To rst.Fields.Count - 1 If rst.Fields(i).NAME Like "*test" Then GoTo skip_it j = j + 1 Select Case j Case 0 Me.Field0.ControlSource = rst.Fields(i).NAME Case 1 Me.Field1.ControlSource = rst.Fields(i).NAME Case 2 Me.Field2.ControlSource = rst.Fields(i).NAME Case 3 Me.Field3.ControlSource = rst.Fields(i).NAME Case 4 Me.Field4.ControlSource = rst.Fields(i).NAME Case 5 Me.Field5.ControlSource = rst.Fields(i).NAME Case 6 Me.Field6.ControlSource = rst.Fields(i).NAME Case 7 Me.Field7.ControlSource = rst.Fields(i).NAME Case 8 Me.Field8.ControlSource = rst.Fields(i).NAME Case 9 Me.Field9.ControlSource = rst.Fields(i).NAME End Select skip_it: Next i rst.Close Set rst = Nothing End Sub Private Sub ReportHeader_Format(Cancel As Integer, FormatCount As Integer) Dim rst As DAO.Recordset Dim db As DAO.Database Dim i As Integer Dim j As Integer Set db = CurrentDb Set rst = db.OpenRecordset("select * from test2") rst.MoveFirst j = 0 i = 0 For i = 0 To rst.Fields.Count - 1 If rst.Fields(i).NAME Like "*test" Then GoTo skip_it j = j + 1 Select Case j Case 0 Me.Label0.Caption = rst.Fields(1).NAME Case 1 Me.Label1.Caption = rst.Fields(i).NAME Case 2 Me.Label2.Caption = rst.Fields(i).NAME Case 3 Me.Label3.Caption = rst.Fields(i).NAME Case 4 Me.Label4.Caption = rst.Fields(i).NAME Case 5 Me.Label5.Caption = rst.Fields(i).NAME Case 6 Me.Label6.Caption = rst.Fields(i).NAME Case 7 Me.Label7.Caption = rst.Fields(i).NAME Case 8 Me.Label8.Caption = rst.Fields(i).NAME Case 9 Me.Label9.Caption = rst.Fields(i).NAME End Select skip_it: Next rst.Clone Set rst = Nothing End Sub
What else do I need to do to get data in the detail section In anticipation
I've created an Access Report of a letter to be printed and mailed to customers. The majority of the letter is text, however there is a subform in the middle that will have a wide range of records displayed in it. This causes the subform's height to adjust from 1/2" to several inches, depending on the number of records. I need the text below the subform to start just below the last record in the subform, no matter how many records are displayed in the subform.
I’m creating a report on which I want to group data base on a field that has two different data one is KEY and OTHER. Now I need to be able to show on the detail section all records base on KEY, and group the rest of the records by OTHER.
I have a button that opens a report. The code behind the button builds the filter criteria for the report based on some selections in a list box.
Code: DoCmd.openReport "Report", acViewPreview, "", GetCriteria For VarItem = 0 To Me.List2.listcount - 1 strCriteria = strCriteria & "([ProjectNo]= '" & Me.List2.Column(1, VarItem) & "' And [ClientID] = " & Me.List2.Column(0, VarItem) & ") Or " Next VarItem If strCriteria <> "" Then strCriteria = Left(strCriteria, Len(strCriteria) - 4) Else strCriteria = "True" End If GetCriteria = strCriteria
This is what the filter would look like with values after running the report (taken from filter bar in report properties):
([ProjectNo]= '150002' And [ClientID] = 206) Or ([ProjectNo]= '150003' And [ClientID] = 79)
Problem is that i only get records for ([ProjectNo]= '150002' And [ClientID] = 206). I this seems only filter ONE set of criteria ignoring all the others. What am i doing wrong?
Is it possible to generate a report from 2 listboxes?
I have attached a pic of what I am trying to accomplish. I am wanting to have a report open with only the criteria that a user selects from the listboxes.
listbox 1: User selects a case number(s)
listbox 2: User selects the fields they would like in the report
So, if the user selects:
Case number: 13-001
Then selects fields:
Allegation Incident date Focus_Last name
This report would be:
Code: Case Number Allegation Incident Date Focus_Last Name 13-001 DUI 06/01/2013 Doe
I have a master recordset containing sales data for numerous products. I'd like to create a dynamic "dashboard" (i.e. a single report or form that the user can interact with dynamically) where the user can click a product name from a ListBox and see a summary report generate in the space below. If they click a different product name from the ListBox, I'd like the report space to automatically refresh and show the next summary report.
I've created my desired report and dragged it into the form but I'm having trouble embedding it dynamically into the form: I tried using the "Link Child Fields"/"Link Master Fields" properties, but get an error message saying I can't build a link between unbound forms. Here's a screenshot what I'm trying to accomplish...
I have created a database and have a form (searchpartsfrm) with multiple combo boxes and a text box that builds up all the entries and creates a perfect SQL statement and stores this in strisql variable.
I have a report (showallpartsrpt) embedded on the page that is currently showing every record in the database.
Is there anyway to have this form "refresh" and show only the results of the query by clicking a "search" button?
I believe I need to use the filter command somehow but im not sure how to reference the embedded form. If I try with some test code it cannot locate showallpartsrpt.
This code runs to the set frm part then i get a type mismatch? ive tried a few different things and still nothing?
Code:
Private Sub Report_Open(Cancel As Integer) ' Create underlying recordset for report using criteria entered in ' EmployeeSalesDialogBox form. Dim intX As Integer Dim qdf As QueryDef Dim frm As Form ' Set database variable to current database. Set dbsReport = CurrentDb
I'm still learning Access 2010 and having issues getting my buttons to work. I'm working on a simple address database.edit/save button. On form load, my fields are locked and my button will read "edit". After clicking, my fields are unlocked, my search features are locked, and my button reads "save" just how I need it to. The issue happens when I try and save the field edits, lock fields, return search features, and get button to read "edit" again. I know I need to add some code into what I already have, but I'm running into a wall as I have tried many options to get it to work. Here is the code for this button:
Code: Private Function Lockdown() 'locks controls at load Dim tb As Control Dim cb As Control Dim subf As Control
[code]...
Second issue is with my report button. I have not been able to get this to work once. I have done many searches on single record reports, and have found the same code every time. I added that code into my database, but can't seem to get it to work. In my database there are two address (shipping and work location) which I would like to print out together. I have the work location on the main form and the shipping on a subform. There are and upwards of 150 locations I will have in my database, Here is the code I'm working with:
Code: Private Sub cmdrptadd_Click() Dim strReportName As String Dim strCriteria As String
I have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.
1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)
2. If user presses the Print button before pressing Save button then system should prompt user.
Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):
Private bSaveClicked As Boolean Private Sub Form_BeforeUpdate(Cancel As Integer) If Not bSaveClicked Then MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation Cancel = True
I am trying to create a P&L statement in access. I know what I want to come out at the end. I am just starting to play with access and having trouble getting what I want to come out of it.
On the sales side I have a query that gathers all the revenue sources and calculates a total for each date. I then use a second query to just take out the data I want for the P&L report. I created a sub-report that displays the data I want. I use the grouping and grand total features to get the total into the report footer. So far so good.
On the expense side I created a form of a query to manage the one to many relationship to capture the data for expenses (one purchase with many line items). I created a query based of this query to get the relevant data for my expense sub-report. I created the sub-report and got everything looking and calculating the way I want it to. I use the same grouping and grand total features to display the data in the report footer. Still good.
I created a new main parent report with the two sub-reports (sales & expenses) on it and even was able to pull the totals from the sub-reports into the main (so currently the subtotals of the two sub-reports are displayed twice). Now when I try to use the textboxes I used to pull the sub-report totals into the main report to perform additional calculations (sales - expenses) I get #error. I have tried different things and gotten ?name.
Control source for the two textbox controls on the main that display correctly, but don't let me do any further calculations.
=[rptP&LExpensesOverview]![AccessTotalsAmount]
=[rptP&LSalesOverview]![AccessTotalsTotal Sales]
To do the subtraction I have tried using the references above, as well as just using the names of the unbound text boxes in the report that bring the totals into the main report.
As a work around, I tried to build one query with all the data from sales and expenses, but can't "filter" based on date and get the data I want in the query results because the two sets of data are not necessarily related. I either get a long list of records, or no records (I am currently only playing with about 5 days of data).
