I currently have a form from which users can select their name and it will open a report listing events they have attended. It does this through a macro running a filter. What I would like to happen is the same criteria that is being used to filter the report be used as criteria for a different (unfortunately) query that can then generate a graph in the report as well.how to get the criteria into the second query for the graph.
View RepliesHow To Setup The Graph's Y-axis in Report.
When I Key in the data MONTH and SCORE. The month not following accordingly.
Example: i key in Jan first followed by Feb...Mar...
The Graph Displayed the Jan in behind (right)
like ->> Mar Feb Jan
How to fix the y-axis ?
I have set up a form on which there is a graph which draws data from a query. I have set up a text boxes to take in the Y axis min, max and interval values so the user can customize the graph according tot he range coming out of the query. This all works fine and is perfect, however, i also need a report and set up a report with the same graph which can be printed to pdf, however, i cant get the y-axis to adjust like i do with the one on the form,
View 11 Replies View RelatedI am trying to generate a report that is based off of a query. The query has a form filter that it needs to filter the data. I keep getting a jet engine error and couple others.
The form has year, start week, and end week on it. I can get the query to work fine. When I try to open the report, Access says it doesn't recognize the " [Forms]![frmUptimeFilter]![StartWeek] " as a valid field name or expression.
I have a bar graph on a report in ms access that represents 4 different risks ie count on the y axis and risk type on the x axis (low, moderate high and extreme)
Question: How do i get the each bar to automatically represent the colour based on the risk colours below?
Low: Green
Moderate : Blue
High : Yellow
Extreme: Red
I have the following query:
TRANSFORM Count([Copy of qryDailyCountOfValidations].Staff_Number) AS CountOfStaff_Number
SELECT [Copy of qryDailyCountOfValidations].PatternStartDate, [Copy of qryDailyCountOfValidations].[End Time]
FROM [Copy of qryDailyCountOfValidations]
GROUP BY [Copy of qryDailyCountOfValidations].PatternStartDate, [Copy of qryDailyCountOfValidations].[End Time]
PIVOT Format([Start Time],"Short Time");
it shows the number of employees that start a shift at a particular time and the time the shift ends, on any day.What i need to show on a graph is the count number of employees starting at x time and plotting the number of hours the employees are on shift until they leave or another employee starts....
-the y axis is the count of employees
-the x axis is the start time of their shift
10
9
8
7 xxxxxxxx
6 x x
5 x x
4 xxxxxxxx x
3 xxxxxxx x
2 xxxxxxxxxx
1
0
00:00 03:15 05:30.........................23:59
So the above mock up says 3 employees start at 00:00 and continue until 03:15 then another employee starts, then 4 employees continue 06:00, then 3 more employees start, 7 all together, then 5 employees leave later etc...
-the level of detail needed is to plot for every 15 minutes.
-The [end time] is not strictly needed, just included to show what columns i have available
achieving this on a graph on an access 2010 report..i have updated a test database so you can see what the data looks like.
I have a report that contains 5 graphs, one for each day of the week. I run this report daily. When I run the report on a Monday, only the Monday graph displays data and the other graphs are blank as there is no data for that day just yet. Is it possible to hide these graphs if there is no data? I did find one suggestion to create a text box with the following code
Code:
Private Sub Report()
If [SumOfWed] = 0 Then
Me.Graph24.Visible = False
Else
Me.Graph24.Visible = True
End If
This does't work for me.Graph24 is the name of Wednesdays graph and the row source for the graph is TRANSFORM Sum([Wed]) AS [SumOfWed] SELECT [Machine] FROM [qryShiftDays] GROUP BY [Machine] PIVOT [Shift];
I currently have a report that generates information based upon a query. The report is broken down into 3 subgroups (Temperature --> Vzip --> VDD). The information within each subgroup seems to be correct as the report cascades through each grouping, however the graph does not update with the new information and instead just copies a clone of itself throughout each Temperature group in the report.
That being said, the first graph that is generated is correct for that group (Temp: -55)... but the report simply copies that graph into the next temperature categories.
I've attached a .pdf of a report generated to visually show what I am referring to, ** notice it replicates the same graph for each group **
I have tried to create graphs in my reports and when I try to resize it, the right side of the graph gets cut off. I am using Access 2000.
When I do the same exercise in Access XP Pro, it works. Can someone help me? I have downloaded the most updated service pack for it as well.
I am trying to change the fill colors on a bar graph based on the value the bar graph has.
the bar graph gives the percentages of tasks and I would like to have it so that the fill color of a bar is based on the a set of values for the percentage... so if the percentage of task A is between 0 and 25% it should be red, if percentage of task A is between 25% and 50% it should be yellow, and if the percentage of task A is between 50% and 100% it should be green.
this is the query that the graph is based off of
Code:SELECT TEST_RawData.DeliverableDesc, FormatPercent(Avg(PercentComplete)) AS CurrentProgressFROM TEST_RawDataGROUP BY TEST_RawData.DeliverableDesc;
This is the data table of the graph
DeliverableDesc | CurrentProgress
test 1 | 82.64%
test 2 | 55.75%
test 3 | 30.09%
test 4 | 13.00%
now I have looked at this http://support.microsoft.com/?kbid=200527 and tried to remodel it to my situation but have some concerns. This is what I have so far
vba Code: Original - vba Code Private Sub Report_Open(Cancel As Integer) Dim chtObj As Object, strRowSource As String Dim rsRowSourceFiltered As Recordset Dim i As Integer, j As Integer Dim strArrTaskPercents() As String Dim intArrTaskColors() As Integer ' The color integers are those that are used by the QBColor function to assign point colors. Const cBadProgress_Red = 4 Const cOkayProgress_Yellow = 6 Const cGoodProgress_Green = 2 ' Place all the task percents values into an array. ReDim strArrTaskPercents(3) strArrTaskPercents(1) = "10.00%" strArrTaskPercents(2) = "25.00%" strArrTaskPercents(3) = "50.00%" ' Place the task color values into an array. ReDim intArrShipperColors(3) intArrTaskColors(1) = cBadProgress_Red intArrTaskColors(2) = cOkayProgress_Yellow intArrTaskColors(3) = cGoodProgress_Green Set chtObj = Me!Graph10.Object strRowSource = "SELECT TEST_RawData.DeliverableDesc, FormatPercent(Avg(PercentComplete)) AS CurrentProgress FROM TEST_RawData GROUP BY TEST_RawData.DeliverableDesc;" Set rsRowSourceFiltered = CurrentDb.OpenRecordset(strRowSource, dbOpenSnapshot) ' Check to see if the filtered recordset has any records. If rsRowSourceFiltered.BOF And _ rsRowSourceFiltered.EOF Then MsgBox "There are no records to chart." Exit Sub End If ' Loop through the recordset containing the chart's filtered RowSource. rsRowSourceFiltered.MoveFirst i = 0 While Not rsRowSourceFiltered.EOF ' Index i synchronizes the Points collection index with the current recordset row. i = i + 1 ' Loop through the task percents array and look for a match with the field names of the chart's filtered RowSource. For j = 1 To UBound(strArrTaskPercents) ' 1-based ' The first field in the recordset contains the task percent. Some tasks may not be in the filtered recordset. If rsRowSourceFiltered.Fields(0).Value = strArrTaskPercents(j) Then ' Because every task has a corresponding color, the arrays strArrTaskPercents and intArrTaskColors always contain the same number of elements. Assign the color of the chart column, bar, slice etc. Graph10.SeriesCollection(1).Points(i). _ Interior.Color = QBColor(intArrTaskColors(j)) End If Next rsRowSourceFiltered.MoveNext WendEnd Sub Private Sub Report_Open(Cancel As Integer) Dim chtObj As Object, strRowSource As String Dim rsRowSourceFiltered As Recordset Dim i As Integer, j As Integer Dim strArrTaskPercents() As String Dim intArrTaskColors() As Integer ' The color integers are those that are used by the QBColor function to assign point colors. Const cBadProgress_Red = 4 Const cOkayProgress_Yellow = 6 Const cGoodProgress_Green = 2 ' Place all the task percents values into an array. ReDim strArrTaskPercents(3) strArrTaskPercents(1) = "10.00%" strArrTaskPercents(2) = "25.00%" strArrTaskPercents(3) = "50.00%" ' Place the task color values into an array. ReDim intArrShipperColors(3) intArrTaskColors(1) = cBadProgress_Red intArrTaskColors(2) = cOkayProgress_Yellow intArrTaskColors(3) = cGoodProgress_Green Set chtObj = Me!Graph10.Object strRowSource = "SELECT TEST_RawData.DeliverableDesc, FormatPercent(Avg(PercentComplete)) AS CurrentProgress FROM TEST_RawData GROUP BY TEST_RawData.DeliverableDesc;" Set rsRowSourceFiltered = CurrentDb.OpenRecordset(strRowSource, dbOpenSnapshot) ' Check to see if the filtered recordset has any records. If rsRowSourceFiltered.BOF And _ rsRowSourceFiltered.EOF Then MsgBox "There are no records to chart." Exit Sub End If ' Loop through the recordset containing the chart's filtered RowSource. rsRowSourceFiltered.MoveFirst i = 0 While Not rsRowSourceFiltered.EOF ' Index i synchronizes the Points collection index with the current recordset row. i = i + 1 ' Loop through the task percents array and look for a match with the field names of the chart's filtered RowSource. For j = 1 To UBound(strArrTaskPercents) ' 1-based ' The first field in the recordset contains the task percent. Some tasks may not be in the filtered recordset. If rsRowSourceFiltered.Fields(0).Value = strArrTaskPercents(j) Then ' Because every task has a corresponding color, the arrays strArrTaskPercents and intArrTaskColors always contain the same number of elements. Assign the color of the chart column, bar, slice etc. Graph10.SeriesCollection(1).Points(i). _ Interior.Color = QBColor(intArrTaskColors(j)) End If Next rsRowSourceFiltered.MoveNext WendEnd Sub
these are my concerns
- first is the strucutre and syntax for the above Sub Report_Open good?
-second how do I match percents the query is outputting to the table to the percents I write in the strArrTaskPercents array
-third how would I change how it matches percents so that it matches a range of percentages, like the first example if something is between 50% and 100% it should be green.
if anyone can directly help with the code, or indirectly point me to some examples, articles, etc. that might help me it would be greatly appreciated.
I have a select query that displays ALL [names] their [values] and the [date] when it was recorded.
Several [names] have multiple records and thus multiple [values]
I have a report based off this query. the report takes this data and graphs it.
The problem:as the database grows in records [names] the graph becomes crowded.
I would like to have a form for the user where they select from a dropdown list which record [names] they want to graph.
This will cause the query to only display records from the dropdown list.
This will cause the report to only graph a desired record.
I dont know how to make a query look for records based off of a select record in a dropdown list.
How to change the Title of a graph with code. By title I mean the box on the graph that automatically displays the name of the table used to create the graph in the chart wizard. I've tried numerous bits of code found in different forums but they all failed.
Access 2010
OLE Class: Microsoft Graph Chart
Class: MSGraph.Chart.8
How can I plot a line graph for each students to show their progress in a term and per session in a class, in a subject.
Something that can be visibly seen to know how a student is doing in a subject or in a class.
I want to be able to take two separate queries to create a 2 line graph. Also to be able to spice the graphs up some. The ones I have done, single line, even seems dull.
View 7 Replies View RelatedI have a column graph I created for a report.
The Y axis has number of days.
The X axis has Member ID.
When I make the column graph the data seems to not be in any order. The report is in order by the number of days in ascending order.
How can I have the columns with the largest number show up first and the columns get smaller. I would like the largest column all the way to the left, proceeding the next one in size so it goes from largest to smallest.
My company wants me to run a high level report which ask for three filters. However as its high level they want it should run with a click instead of choosing filters from three drop down ...
As this report comes out as a graph I can't use report wizard to run tabular report. Any smart way that they click a button and get filtered data in graph form.
I have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.
1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)
2. If user presses the Print button before pressing Save button then system should prompt user.
Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):
Private bSaveClicked As Boolean
Private Sub Form_BeforeUpdate(Cancel As Integer)
If Not bSaveClicked Then
MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation
Cancel = True
[code]...
I am trying to create a P&L statement in access. I know what I want to come out at the end. I am just starting to play with access and having trouble getting what I want to come out of it.
On the sales side I have a query that gathers all the revenue sources and calculates a total for each date. I then use a second query to just take out the data I want for the P&L report. I created a sub-report that displays the data I want. I use the grouping and grand total features to get the total into the report footer. So far so good.
On the expense side I created a form of a query to manage the one to many relationship to capture the data for expenses (one purchase with many line items). I created a query based of this query to get the relevant data for my expense sub-report. I created the sub-report and got everything looking and calculating the way I want it to. I use the same grouping and grand total features to display the data in the report footer. Still good.
I created a new main parent report with the two sub-reports (sales & expenses) on it and even was able to pull the totals from the sub-reports into the main (so currently the subtotals of the two sub-reports are displayed twice). Now when I try to use the textboxes I used to pull the sub-report totals into the main report to perform additional calculations (sales - expenses) I get #error. I have tried different things and gotten ?name.
Control source for the two textbox controls on the main that display correctly, but don't let me do any further calculations.
=[rptP&LExpensesOverview]![AccessTotalsAmount]
=[rptP&LSalesOverview]![AccessTotalsTotal Sales]
To do the subtraction I have tried using the references above, as well as just using the names of the unbound text boxes in the report that bring the totals into the main report.
As a work around, I tried to build one query with all the data from sales and expenses, but can't "filter" based on date and get the data I want in the query results because the two sets of data are not necessarily related. I either get a long list of records, or no records (I am currently only playing with about 5 days of data).
The aim of what I am doing is to create a monthly statement to give to our intermediaries that shows the commission they will receive each month for the deals they have referred. I have managed to create this report, HOWEVER I can't figure out how to filter out which month I need, so I a report for Jan, Feb Mar etc... The idea is that at the end of each month I need to run the report so only the latest month shows...
View 3 Replies View RelatedHow do I hide the report footer based on the report's data ?
I'm trying to hide if number of users = 1
The report's data is a query built inside the report's RecordSource, not a self standing query.
I've done this once entirely by accident and can't seem to duplicate it...
I have a report. It has the following:
Report Header: Logo and title
Department Header
Supervisor Header
Group Header
Detail
Department Footer: Totals
Report Footer: Overall Totals for all departments
Here's my question.
I have combo boxes on my main form that filter this report. The combo boxes are referred to by the query that runs the report. How do I get proper unfiltered overall totals in my report footer?
I have a report that displays incidents, their details, consequences and a photo. Among the details is a severity rating high medium or low, I have been asked to make the report shorten the records which have been given a low severity (because it takes up as much space as the more important/severe ones).
The only method I can think of is to use the onformat event, to shrink and make invisible all the fields that I don't want to see if the severity field shows 'low'.
We have a shift log that includes both personnel actions during any given day as well as operational actions. (We recently switched from a word document to an Access Database to allow multiple users to input events while another has the logbook open already (which you couldn't do with Word))
At the beginning of each day, my manager reviews the previous days log and forwards up pertinent data (some personnel, some operational) to our higher authorities. Is there a way to allow him to select which records he'd like to include on that higher-authorities report straight from the local-level report?
I'm not a fan of allowing him a "Save As" feature because that kind of defeats the data integrity purpose of an events log where he could save as an RTF and then edit any of the log entries without any checks or balances.
I have an odd thing happening with my reports. There is a main report that gives class information (from query). There are two subreports (from queries also ) with scores (one for each type of test). There are some unbound controls on the main form that display a count of how many scores are recorded which are totals from the subreports. The controls all report the correct numbers however, when I scroll down to view each record, some of them change to #error, or #name, or similar for a moment. Sometimes they will stay in error form when I stop scrolling but change to correct if I scroll up just a bit. Is this because the controls won't calculate unless that report record has focus?
View 1 Replies View RelatedIs there a way to hide a label on a report if the sub report count is 0?
View 2 Replies View RelatedIs there a way to have say five different reports that give out information and at the bottom the totals. I would like to take each of those separate reports to create one report with just the totals.
View 3 Replies View Related