We have a ms graph object in the report. All the programming code relating to it is perfect and the graph displays correct too. But in some circumstances, the graph displays with different mold than it should be.
When we preview it in a single base, it works fine. Sometimes, in this way too the graph has a display error.
I have used the maximum potential solution to this, but all failed in vain.
1. Setting delays and refreshing the form and re-querying the graph data
2. Created a new database and imported all the objects and tried to run
3. Compact and repair database
4. Tried with re-creating the report from scratch.
why this type of error display is coming up with the ms graph object.
I am using an unbound object frame to display an .png image file which is set in vba.
The image is an excel chart saved as a .png
The problem I have however is that the image I save from Excel is great quality, and is pretty tack sharp, but when I display the same file in the unbound object frame in access, it is not nearly as sharp.
I am setting the picture property of the control as:
ubImageUserChart = "c: empmyChart.png"
It displays alright, but is just a bit fuzzy - still quite legible, but it is a complex graph with a lot going on - has regressions and formulas etc on the graph, and they need to be very clear.
BTW - the unbound frame is the same size as the Excel chart which gets saved as a .png file. If I tile the images (Access unbound frame and original file in picassa preview) side by side - they are identical - size, orientation etc.
It is not practical for me to try and do the chart natively in access as it is way to complex. I am using access vba to drive an excel session to do all the statistical yack work and chart rendering, then displaying a png image of the resulting chart in an unbound object frame in access.
I am creating an form in a database and whenever one of my procedure's run it creates this error message:
The expression ON Load you entered as the event property setting produced the following error: Member already exists in an object module from which this object module derives.
*The expression may not result in the name of a macro, the name of a user-defined function, or [event Procedure]. *There may have been an error evaluating the function, event, or macro.
I am working on my DB for work and would like to display all of the report names that are listed in the Reports-Objects of my DB.
I would like to display a Form with two boxes. The left box would display the names of the reports as listed in the Objects-Reports. When a report is highlighted in the left box it would give a description of the report in the right box. When you double click on the report name it would open the report.
Since I am fairly new to Access could you give me an example of what I would like to accomplish? Your assistance is appreciated.
I'm trying to display an image which is saved in the table as an OLE Object in a message box. The field with the object is "PowerCurve". This is what I'm trying to do. It allows me to get as far as clicking yes to view the second message box but then it results in an error when it tries to display the image.
Code:
Dim strDetails As String strDetails = DLookup("Details", "ExistingDeviceDetailsQ") Dim strCurve As String strCurve = DLookup("PCurve", "DeviceT", "DeveloperProduct = '" & Forms!DeviceF!D_ExistingDeviceCmb & "'") If strCurve = "No" Then MsgBox strDetails, , "Device Details"
[code]....
I get the error "Object variable or With block variable not set" on the line
I have rcently produced a label report for my Xmas cards, and I would like to add a picture to the label in the form of Father Christmas. Can anyone help me on this subject.
I have saved query object named qrySearchBill. I wan to call this query through vba and display the result in a subform named subQrySearchBills in datasheet view. Here's how I want it to work:
When the main form loads, I want all unfiltered records to be displayed in the subform initially. The user may then decide to filter based on date range, so he enters startdate and enddate parameter values in their respective textboxes in the main form. Then click search button to run the saved query based on the date range parameter taken from the textboxes.
I have this code so far:
SQL of the saved query object:
Code: PARAMETERS [StartDate] DateTime, [EndDate] DateTime; SELECT tblInvoice.BillNo, tblCrdCustomer.CstName, tblCrdCustomer.CstAddress, tblCrdCustomer.Island, tblInvoice.Date, Sum(tblInvoice.[TotalPrice]) AS Amount FROM tblCrdCustomer INNER JOIN tblInvoice ON tblCrdCustomer.IDNo = tblInvoice.NameID WHERE tblInvoice.Date Between [StartDate] And [EndDate] GROUP BY tblInvoice.BillNo, tblCrdCustomer.CstName, tblCrdCustomer.CstAddress, tblCrdCustomer.Island, tblInvoice.Date;
vba code to call the query and its parameter:
Private Sub btnSearchBill_Click() Dim qdf As DAO.QueryDef Dim rst As DAO.Recordset
Set qdf = CurrentDb.QueryDefs("qrySearchBills")
[Code] ...
This code works fine except that when the main form loads, a prompt window appears to ask for the value of dateStart and dateEnd. I don't want it to prompt because it's suppose to get these values from the main form's textboxes (txtStartDate and txtEndDate respectively), plus it should initially display all the unfiltered records.
I was wondering if anyone can help with this code. I am sure it is something simple. It works fine until the last line the (x1down) line. I am not sure what I am missing there. I got that code by recording a macro in excel. It simulates the shift/end/down keystroke which will select all fields that are in the same condition (blank or containing data) as the cell you start at.
The error I get is runtime error '424' - object required
Anyway...hope you can help. Thanks.
Dim opensheet As Object
Set opensheet = GetObject("\Netstore rainingdocsRobDataopen.xls")
Hello, i develope with ACCESS2003, i used the printer object : dim xxxx as printer, it works fine but when i install my program on my client PC which doesn't have ACCESS2003 but only ACCESS RUNTIME2003 i have an error (error c++ ... run-time terminates abnormaly), this PC have ACCESS2000 and when i run my base through ACCESS2000 to debug it i have an error (undefined object) on the dim instruction. I was thinking all aplication developed with A2003 was running with run-time2003, apparently no, is something missing ? Thanks in advance for any help. VINCENT
I am Embedding OLE objects (PDF files) into a table and am having errors that state
"A problem occoured while Microsoft Office Access was communicating with the OLE server or ActiveX Control."
From what I can see there is not a problem with The OLE server, so the only thing I can think of is that I have hit my limit of OLE objects. I have only got 81 records but will need more like 400 - 1000.
Need a second opinion on this one, if someone has the time.
The boss is asking me about this: Small db to track keys issued to individuals.
2 tables: #1. ID, (with auto numbering for ID,) and basic name, SS #, etc. #2. ID and Key number, Date Issued, etc, without auto numbering.
1 to many relationship (#1 to #2). Cascadeing Update and Delete, and referencial integrity.
He has a form and subform based on a query, wants to do basic info entry on main form (for table #1), then tab to subform to enter specific info for (for table #2).
Problem is, when he tabs to the subform, he gets "Automation Object "Keys Issued" Not Available" error message.
I've found that in his querry, he is pulling the ID from both tables. I can stop the error by eliminating the the ID from Table #1, using only the one from Table #2.
Is this just a fluke, or do you think I may have hit on the root cause? Any suggestions for problems to watch out for?
I have searched the forums and I don't see this problem. I have a split database. When I test it it works fine. It resides on a network drives and permissions have been checked. When users try it they get an error message that says "you can't assign a value to this object". This occurs after they have selected a project and the user form opens. The user form appears blank.
I have gone to other offices and if I am signed on to their machines it works but if they are the message comes up. I'm at a complete loss and need some advice. It's probably as plain as the nose on my face but I've been struggling for days.
By the way - I used to be Mrs.Meeker...I haven't been around for a long time.
I have a db that is in a multi-user environment. I have a problem that keeps occurring. The problem is that I designed a report that is programatically sent via an email from a button on a form. The problem is a copy object error (run-time error 2501)that is occurring. The object wasn't canceled, ie the email wasn't cancel (which produces the same run-time error). This error just occurs. Doesn't occur all the time. The same report will be able to be sent (emailed) by the inspector either by the end of the day or by the next morning. So the problem doesn't appear to with the code (even though it still may turn out to be), since it works. The report has a unique name which is done by the coping the object and then deleting the object.
This problem is completly frustrating me and my users as it appears that it just "hangs up" when it so desires.
Hello, I am relatively new to Access and I am trying to update someone else's work so here goes. I have to revise a form to incorporate the new fiscal year. I have gotten variables named and feel comfortable that is correct. However, when I click on the "Run Query" button, I am getting the error "Object Required". I know this probably an easy fix but I can't seem to find it. I have attached the code for the form in a Word document. If anyone else needs additional information, please let me know.
I want to put a company logo in my report ( object/picture) but when I send the report via w-mail or link it to a word document it disappears. is it not possible for it to stay in the report.
I have been tasked with creating a database to log employee suggestions and then automatically present reports around the site. I have developed the database and it works OK and can output *.PDF reports, but I'm having problems with how to display these reports. My idea was to output the reports automatically as *.TIFF or *.JPG files and have them stored in a folder that the My Pictures screensaver uses. The reports (in fact, any site report stored in this folder) can then be shown on any screen dotted around the site when it goes into screensaver mode. However I can't find any way to output/convert to a picture file.
The other option is to create a webpage that rotates through the saved PDFs, but this isn't ideal as the PC users will have to load the webpage to display the reports.
I had this error occasionally popup whilst testing my code.
I thought it was strange, because it was in a Microsoft message box, with a Microsoft message, not one of my own messages from my own error routines. This made it very difficult to isolate, I didn't have a clue what was causing it.
However I decided to track it down and to cut a long story short this is what I found:
Err_EditDetail_Click: MsgBox "Error!" MsgBox " Error From >>> EditDetail_Click() Error Number: " & Error.Number & " Error Description: " & Err.Description Resume Exit_EditDetail_Click End Sub ' EditDetail_Click()
Notice "& Error.Number" I don't know how this got changed from "& Err.Number" to "& Error.Number" but that was what was causing the Run-time error '424': Object required.
I created an application in access 97 under win2000 Pro. Some of the forms use a calendar button. The problem is that one of the users can not use the button, when trys to open it, the calendar is blank and the following msg appears:
i am trying to call another form's object event.. and i am receiving error mesage "object required". Any ideas anyone? here is my statement:Call frmMain.cmdOK_ClickI do have both subs, the one being called and the one that this statement is in, both as public.thanks in advance!
Using Access 2k and Word 2k on a WinXp Workstation.
The code that I'm using is MS standard and has never previously given me any problems (see below). I've searched the MS knowledge base and Googled the error but nothing I find seems to relevant to this situation.
Can someone help?
TIA,
Mo
-----code----
DoCmd.Hourglass True If CreateWordObj() Then With gobjWord .Visible = True .Documents.Open "c:hp_lettersdrugsranout.doc" DoEvents With gobjWord.ActiveDocument.MailMerge .Destination = wdSendToNewDocument .SuppressBlankLines = True .Execute End With '.ActiveDocument.PrintPreview .Visible = True End With End If
I'm building a simple database for storing records about books.
I'm currently working on one of the data entry forms. Part of this form is supposed to enable the user to add details about the book and the series that it belongs to (if it does belong to one).
The relationship is One-to-Many: One series can have many books. I've made the series part a sub form.
When I enter some data to test that it works, I get an error message when I try to add a new series using the sub form. It says:
"You can't assign a value to this object. *The object may be a control on a read-only form. *The object may be on a form that is open in Design view. *The value may be too large for this field."
As far as I know there isn't anything wrong, so I'm not certain why this error message comes up. I think it may have something to do with the primary key being the AutoNumber data type, but I just click 'OK' and ignore it, and it works fine.
The database works as far as I can see, I just want the error message to stop appearing.
I have been using this export function for the longest time and today it is giving me an error:
Object invalid or no longer set.
Export code:
Code: On Error GoTo Err_cmdTest_Click 'Must 1st set a Reference to the Microsoft Office XX.X Object Library Dim dlgOpen As FileDialog Dim strExportPath As String Const conOBJECT_TO_EXPORT As String = "EXPORT"
