I have a query that pulls the records by month and year this worked great
Query is set up as
Field: Month: Format([ErD],"mm/yyyy")
Criteria: [Enter Month and Year (mm/yyyy)]
But I need the Month that is pulled to display in the report header along side the report header text without the user needing to enter the Month again.
Example report header: January Things you need to know.
The aim of what I am doing is to create a monthly statement to give to our intermediaries that shows the commission they will receive each month for the deals they have referred. I have managed to create this report, HOWEVER I can't figure out how to filter out which month I need, so I a report for Jan, Feb Mar etc... The idea is that at the end of each month I need to run the report so only the latest month shows...
View 3 Replies View RelatedI have a report filter that filters the reports by month and year:
Code:
DoCmd.OpenReport "AttWholeCity", acPreview, , " Month = '" & txtCourseDateMonth & "' AND Year = '" & txtCourseDateYear & "'"
I want the code to also show these two columns where there are null/blank values aswell, for example if I filter by apr 2015 i want the report to show these columns as well as blank columns is this possible
Is there a way to have my database see that its a new month and then run a report that could be automatically emailed?
View 6 Replies View RelatedI am trying to create a cross tab query which will output the data for only three months starting from the recent month. I would want these months to be heading. However, I don't want to create reports over and over again. I want something, that will resolve the issue through parameters kinda thing. I don't know, if this can be done or not. Right now I have the cross tab query for all the months, but I have to manually choose the months to fit in the page. I hope I am making sense here. I didn't know where to post this, in query or in report. Therefore, I am posting it here.
Thanx in adv.
im working on a report at the moment that will generate a standard NIP (nutritional information panel, similar to whats on the back of pretty much all packaged food products, see link below for an example)
[URL]
this in itself is pretty easy, however depending on which market we're selling to, different countries have different requirements for which data is to be shown, ie some markets might require we show how much sodium but not how much fiber, others might require us to show how much carbs and sugars but not how much vitamin C and so on (all up there are 16 different variables for nutritional info, due to size requirements on our packaging we cant simply display all 16 all the time)
at the moment im designing a form which has a drop down box (for the user to select a product) and checkboxes for each of the 16 variables (kilojules, carbs, iron, trans fats, sat fats, etc) following this ive got a report that has all 16 variables on it
i can make the variables that arent ticked on the form invisible (by adding a bunch of IF or Case statements, on print of the report, that determine whether the corresponding checkbox for each variable has been ticked and setting the "visible" attribute to true or false accordingly), however when they are invisible there is still a blank space where the field is meant to be ive got all the fields grouped together, is there any way of making fields invisible and then pushing all the visible fields together so there are no blank spaces?
I am creating a crosstab query in VBA to report on claims on a paid and incurred basis. I would like the query to have 13 columns - one for each month of the current year and one for all claims paid prior to January of the current year.
Is there a way to lump all data with a date less than Jan 1 into a single field while retaining the monthly detail for the current year?
All of the data is coming from a single table. Sample code below functions, but provides a column for every month a claim was incurred.
Sub Triangle()
'Triangle Reports
'Check Registers
On Error GoTo Error_Handler:
Dim DB As DAO.Database
Dim RS As DAO.Recordset
Dim QRY As DAO.QueryDef
[Code] ....
I am editing a database that provides the option of creating custom reports, where the user can input a date range of their choice and receive aggregate data for that time frame. Although all of the numbers in the report are correct, I am having trouble with a chart that I inserted into the report.
Specifically, if the date range requested spans 2 calendar years (i.e. April 2014 through January 2015), the data for January 2015 appears at the beginning of the year (so the chart x-axis is for Jan through Dec, and the Jan 2015 data is showing up in Jan (as if it was 2014, not the end of the given range in 2015). When I try with smaller time frames within a calendar year, it adjusts just fine (i.e. shrinking the window so just March-May is displayed on the graph).
How to adjust the axis so that it properly records the data range- so that it would start the axis with April and end in January, for example?
I have via macro that displays the main interface to my database; frmMain (Maximize). This form frmSelectUIC (Minimize) allows me to select a department number of the data imported for analysis.
All is fine, as shown here;
http://members.cox.net/mustang31859/access/before.gif
However, after opening then closing any report the frmMain no longer is displayed as before.
http://members.cox.net/mustang31859/access/after.gif
Why the shift?
Gunner....:confused:
I have a report with 4 subreports. The report contains calculated fields that use the totals field in the different sub reports.
My issue is when one or more of the subreports does not have data in it. The sub report dissapears while in print preview, removing the totals row and ruining the calculated fields in the main report.
How can I keep the sub report visible even if no data is displayed? Or have it invisible but have the calculated fields still reference.
I am trying to create a database that will keep track of the orders placed for a given part number by month. Currently, my table houses the part number, and the ordered amount for the past three years by month (there are thirty-five columns for every part). My column headings are ORDER_MAY_2013, etc. I would like to set a query up that will look at the column headings and pull the amounts ordered for each part for the past twelve months. In other words, I have three years of data in my table. In my query, I just want one year. However, I don't want to have to rewrite the query every month so that it will pick up the new data. Is there a way to accomplish this?
Is there a better way to build this database? I thought about just have four columns in my table - PART_NUMBER, ORDER_MONTH, ORDER_YEAR, ORDER_AMOUNT. The only problem there, is that every part (there are about 450 parts) would have to be listed 35+ times. That seemed too redundant to me, so I built the table this way. However, now I am having trouble querying against it.
I have a report when i send units back to the customer, the report generates an ID in a list box (a query picks the last ID used and adds 1)
after the report prints i use an update query to mark the units as "shipped" with the dates in the main table. i need the update query to use the value from the list box to update the value in the table.
I have a report based on a query.There is a field in my personnel table and the query: [Field] with values from my lookup table and has three choices:
1-Inspections
2-Administrative
3-Safety..
I have a report and would like to filter based on [Field].I can filter by putting [Field]=Inspection on the Filter On Load, then typing 1 into the parameter box. And it works.I cannot however choose more than one of the three choices and I have to type the number in. Fine for me but it won't be for other users.it is used for more than one report. I would also like to avoid having seperate queries for all these reports.In other words, I would like to filter the report, not the query.
I want to be able to run a report based off my "Allot_Q" query. I have a button to perform the report but would like the button to update the query and run my report based on my selection text boxes. Right now I have one button the runs the query based on the selection and then another button to run the report. My boss wants one button to pull the report based on the selection.
View 1 Replies View RelatedI am having trouble getting data to appear on my Report. The report is based of a Query, qryLabel. When I run qryLabel the correct data is displayed but when I try to use this data on the Report, I get an #Error or #Type. Here are the methods I have tried so far to get the data on my Report:
DLookUp
=DLookUp("[StoneLength]","Stones","[StoneName] = Forms![Product]![ProductID]")
Using The Query
=[qryLabel]![StoneLength]
Using the Table
=[Stones].[StoneLength]
Code:
Private Sub Command37_Click()
Dim db As DAO.Database
Dim rsItems As DAO.Recordset
Dim SQL As String
Dim currentItemNumber As Long
[code]....
adding record set in report and displaying a report..i want every record to pass thru recodset and create a report for every record separately
I am relatively new to writing databases in access, I did some a long time ago, but cant remember what on earth I used to do.
I have created a database with all the information I need it and have a query set up that gives different results depending on the information the user has entered
The user decides what the query will display though a form.
I want access to generate a report with the information in it that the query chucks out.
However the information the query gives changes every time depending on the user input.
there is a query and report "01 qry Main" and from the main FORM I like to print out into txt file actual record, my code is:
Private Sub Command24_Click()
On Error GoTo Err_Command24_Click
Dim stDocName As String
stDocName = "01 qry Main"
DoCmd.OutputTo acOutputReport, "01 qry Main", acFormatTXT, "D:10 DbaseCTQ stuffsaveReportFormat.txt", False
code]...
there should be an option "ID = " & Me.ID.Value or something like this to print out only actual record.
Using a table with employees, I created another with equipment that uses a lookup to assign each piece of equipment to an employee (more than 1 piece of equipment can be assigned to each employee)
I want to be able to select records using a form, either by checkbox or listbox of which employees to include in the report that shows what equipment each is assigned. The problem I am having is creating the form/code to create the and/or query to generate the report.
I have a report that takes numbers from a query
as an example
To be migrated - 50
Migrated - 30
Excluded 10
were each number comes from a query field..Can I add say Migrated and Excluded within the report and possibly other calculations that I may wish to include.
Everytime i make a report in Access, first thing i do is build a query and then use it as a record source. I try the other way, I go to create report design directly and do the drag and drop of fields.
View 2 Replies View RelatedI created a Report from a query. The query shows the correct data that should be on the Report. I created the report to sort by Field A and then sum Fields D, E, & F. None of the query data shows up on the Report. I;m stymied as to why I can see data on a query, but the ONLY data that shows up on the Report is Field A. None of the summations show. All are blank with the box outline.
I've created the report 3x thinking I did something incorrect. Whatever it is, I did it 3x!
Is it possible to add a query to an existing report? I use Access, not VBA.
View 1 Replies View RelatedI have a query where I ORDER BY ClientId, MatterId and Transdate. The result of the query is correct. All of the transdates are in ASC order within the Matter.
When I run the report for a MatterId the relative transactions are not sorted on transdate
Can there be something in the report that could be effecting the order of the transactions.
I have a report (report1) which is based on a single query (query1).
There is a second query (query2) which returns just a single value (say 100) and I want the result of the query2 to appear at the bottom of the report1. The query2 is not related to the query1 so I cannot join them.
When I insert a text box in the report1 and choose the query2 from the control source Access gives the error, "The Microsoft Access database engine does not recognize '' as a valid field name or expression".
Objective to have a report generated from a query (Based on a Storage Table) in the record-source however need to make adjustments to each record based on the query output ie User Id is outputted as number as it needs to be for everything else but on the report loading needs to run an sql query on that ID number to get the name and then replace that value with the name and so on for each record and each appropriate column
Problem:I can either change All of the records outputted with the first records info or nothing at all. i need this process to occur individually on each outputted record