Reports :: How To Adjust Text For Subforms With Dynamic Heights
Jun 27, 2014
I've created an Access Report of a letter to be printed and mailed to customers. The majority of the letter is text, however there is a subform in the middle that will have a wide range of records displayed in it. This causes the subform's height to adjust from 1/2" to several inches, depending on the number of records. I need the text below the subform to start just below the last record in the subform, no matter how many records are displayed in the subform.
Access 2010
View Replies
ADVERTISEMENT
Nov 18, 2014
I have set up a report in Access. However, when I look at it in print preview, I get the message that the section width is greater than the page width, and that some pages will be blank. It is obvious that the Detail Section is the issue, but I can't figure out how to reduce the section width. The detail section only contains a few text boxes that are well within the margins of the other sections.
How do I adjust the section width so there won't be any blank pages?
View 6 Replies
View Related
Aug 22, 2004
hi,
i'm having a problem making my report dynamic, i have a query which returns the
payments due in the next month, my question is, if i have a form based on this query,
how can i make it so that, if i need to print an invoice for one of the customers, lets say the currently displayed record,
how can i limit the customers displayed in that report (invoice) to just the current record that i want the invoice for?
Thanks
View 4 Replies
View Related
Jun 7, 2004
I have 12 months' worth of data that the user wants displayed on a crosstab report. I have no problem creating the crosstab query or subsequent report. However, the user wants to be able to select their own 12 month time period. So, my crosstab is based upon a make table query, that will allow the user to enter parameters.
Now, my problem is that these 12 month column headers/data will change as the user enters different date ranges. How do I write the code that will allow me to pass these variables to the report? I'm using 97.
Thanks!
View 14 Replies
View Related
May 9, 2013
I have a form with payment information and need a list, what date the payments are due. These can be only 2 or 3 payments up to maybe 24 payments. The result I want is something like this:
Date Amount Total paid
1.7. 500.00 500.00
1.8. 500.00 1,000.00
The list itself is not a problem, but I need a list who only shows the number of payments as agreed, 2 lines (with paydates) if 2, 12 if 12 payments. I have the information of the total amount, the number of installments and the first payment date.
View 5 Replies
View Related
Nov 13, 2014
I have a crosstab Query as the source for my report, of course the issue is the column headings on the report. I have Purchasers as a row heading, Year as a row heading, Month/Year as a row heading, Meter as a column heading, PaidMCF as Value and, a total as a Row heading. My issue is feeding the column headings on my report with the meter names.
Purchaser 1 has 23 meters attached
Purchaser 2 has 1 meter attached
Purchaser 3 has 6 meters attached
Purchaser 4 has 2 meters attached
Purchaser 5 has 16 meters attached
Purchaser 6 has 11 meters attached.
View 4 Replies
View Related
Jul 28, 2013
I created a dynamic crosstab report with 4 unbound fields in the details section and 4 unbound fields in the header section, which all work perfectly well. The crosstab query contains 17 columns. The last 4 columns contain the values I need to take the sum of. I have put some code in the open event procedure of the report.
Private Sub Report_Open(Cancel As Integer)
Dim rs As DAO.Recordset
Dim db As DAO.Database
Set db = CurrentDb
Set rs = db.OpenRecordset("Select * from Que_ProjectUren_Sel_Dept_Test")
[code]...
View 11 Replies
View Related
Jul 3, 2014
I'm currently creating an invoicing report for a company, and for record purposes they need a dynamic field on the report for the specific Invoice Number of each client they invoice. I have the field set up currently as a text box =[Invoice#] so they have to enter an invoice number when they generate the report. However, when I generate the report and put in a number, I'm getting some whacky outputs.
For example, I've tested it with a test client, and when I give the client an invoice number of 1, the report somehow changes it to 49.
View 1 Replies
View Related
Mar 2, 2005
Hello All,
How can I create reports in Access based on dynamic queries? I did a lot of search on this but couldn't find anything reasonable.
Any help to get me started will be extremely appreciated.
Thanks
View 1 Replies
View Related
Feb 20, 2005
I have the following query, which I know works.
The query is called "products_due_in_query"
SELECT Sum([Supplier_order_line].[quantity]) AS [Due_in]
FROM Supplier_order_line
WHERE (((Supplier_order_line.order_line_status)="Awaiting delivery") AND ((Supplier_order_line.product_number)=[product_number_combo]));
product_number_combo is a combobox on a form called "product_enquiry".
I have a text box on "product_enquiry", which I want to show the value of "Due In" (from the query), when the user selects a product_number from the product_number_combo combobox.
How can I do this? I have tried setting the text box control source to products_due_in_query.Due_in but all I get is "#name".
I thought about doing it with VB code, but dont know how.
I have used .recordSource before, to assign a value to a combobox, but I dont know how to do it for a text box.
Can anyone help?
Thanks very much.
View 1 Replies
View Related
Mar 21, 2015
I've made a crosstab query and would like to use it to create a subreport. In the column headers I have names of courses. Courses can be added or removed. How can I make a crosstab report with dynamic columns?
PHP Code:
TRANSFORM Count(tblCourses.CourseName) AS CountOfCourseName
SELECT tblNmscStaff.NmscStaffFirstName, tblNmscStaff.NmscStaffLastName,
tblNmscStaff.PtOrFtNtl, tblNmscStaff.Ntl, tblNmscStaff.NmscID
FROM tblNmscStaff LEFT JOIN (tblCourses RIGHT JOIN [tblNmscStaff/CoursesPointer] ON
tblCourses.CourseID = [tblNmscStaff/CoursesPointer].CourseID) ON
tblNmscStaff.NmscStaffID = [tblNmscStaff/CoursesPointer].NmscStaffID
GROUP BY tblNmscStaff.NmscStaffFirstName, tblNmscStaff.NmscStaffLastName,
tblNmscStaff.PtOrFtNtl, tblNmscStaff.Ntl, tblNmscStaff.NmscID
PIVOT tblCourses.CourseName;
View 1 Replies
View Related
Apr 22, 2014
I have made a cross-tab query which works fine. I also have made a report which is based on this cross-tab query. Due to nature of the cross-tab query the Value column(s) is dynamic. The report I made is based on all available data types (columns). The report works if all data type is available but the report fails if some of the data types are not available (i.e columns are missing due to not having any value or data). I hope I am explaining this correctly,
Is there a way I can use expressions in the report to place a conditional clause that if the Control Source doesn't exist place a Null or 0 in the report or in its place.
View 2 Replies
View Related
Aug 27, 2004
Is it possible to force the subform to start printing on a new page in a report. I know that you can get a group to do this within the subform, but I can't get the subform itself to do it.
View 1 Replies
View Related
Oct 27, 2013
I wanted to build a dynamic search form using text box instead of the common combo box type.
I found an example that used the combo box and the searching portion of the code is as followed:
Code:
If Nz(Me.txtID, "") > "" Then
If Len(Nz(strFilter)) > 0 Then strFilter = strFilter & " And "
strFilter = strFilter & "CategoryID = '" & Me.txtID & "'"
bFilter = True
End If
How to insert (Like "*" & Me.txtID & "*") into the code to make the dynamic search using text box possible.
View 1 Replies
View Related
Jul 16, 2012
I have used Transfer text cmd to export query to text in MS access. This works fine. path= "D:/test/"DoCmd.TransferText acExportFixed,"Query1",path,False But i need to change the path dyanmically as my wish when i run this query. Like i may save my txt in desktop or C: or D:. I dont want to hard code path as above.
Is there any way to achieve this? If i get the dyanmic location stored in path variable i can achieve it. But i dont know how to achieve this.
Actually i was confused
Docmd.OutputTo acOutputQuery,query1
Above query prompts me for selecting location. But transferText doesn't? why?
As this application is stored on server. If i give a static path, its exporting in Server D:/test/ But i need this to be stored in my local. This can be done only if it prompts box for user to select the location.
View 5 Replies
View Related
Feb 5, 2014
I need to create a report with multiple subforms. I set up my first report and then I believe I need to add "more detail" sections or another page to this report so i can drag in my additional forms.
How do i separate out sub forms? Ideally I will want to have the main table on the top then the sub form in the middle, then the next on the bottom of the page.
View 1 Replies
View Related
Jun 20, 2013
I have a report "AFR" that includes workorder fields. I would like to also include the subform information for the parts and labor.I was able to put the subforms on the report but it will only display the first part and not all parts from the parts subform.
View 1 Replies
View Related
Jun 30, 2006
I have a form that shows a list of all of my records in my database. I want to be able to click a button called "Report" and have that print a report that has all the records I have filtered on my form. I have a report in the format that i want it in, however, currently it prints every record and not just what is shown on my form. (The form is dynamic and I want the Report to be dynamically based on the form) HELP PLEASE!
View 6 Replies
View Related
Jan 10, 2006
I know in access 2003 i can use:
printer.leftmargin = 0
but in access 2000 there is no printer object. Is there a way of setting the margin with vba from access 2000?
View 5 Replies
View Related
Aug 21, 2004
First off, I'm really new to all this so I'm a little overwhelmed. I know what I want but may not describe it well.
I'm just trying to get a basic issue to work.
If I have 2 databases, one which has names, and another which has information - in memo form. What I'm trying to do is create a form which will allow me to bring up a persons name and have the subform query the information database for all information (events) which have this persons name listed inside.
I have tried both filters and queries and while I can get everything to work if I type in text in the queries in and/or filters if I try to use the value of the name in the main form nothing ever works...
Thanks...
View 4 Replies
View Related
Jul 9, 2013
Below is code to adjust file attributes.
Code:
Public Shared Sub Main()
Dim path As String = "c: empMyTest.txt"
' Create the file if it exists.
If File.Exists(path) = False Then
File.Create(path)
[Code] .....
View 3 Replies
View Related
Mar 20, 2013
How to adjust the column width of the fields to best fit in a Query using vba codes? Manually it can be done by selecting the Query - Click on More dropdown of the Reports section in the ribbon - Click on Column width - and select best fit as the option.I want this to happen by a vba code and not manually doing it everytime because the field length changes as it is a dynamically created Query.
View 3 Replies
View Related
Jun 12, 2012
I am trying to make the + - (numpad) adjust the date of the current text field. The problem I am having is I believe the input mask intercepts the keypress and my keypress event is never fired. Here is my code:
Code:
Private Sub LeaseDate_KeyDown(KeyCode As Integer, Shift As Integer)If (KeyAscii = 107) Then
LeaseDate = DateAdd("d", 1, LeaseDate)
End If
If (KeyAscii = 109) Then
LeaseDate = DateAdd("d", -1, LeaseDate)
End If
End Sub
Access makes the ding noise when I try and press + and - ...
View 4 Replies
View Related
Apr 11, 2013
I have a report that has Bill to and Ship to addresses. They are positioned across from one another (ship to on the right and bill to on the left of the page). The issue is that the 'can shrink' doesn't work when there is data in the same field on the other address..
View 1 Replies
View Related
Jun 4, 2013
I have a single field in a table called "Client Contact", where users enter a semicolon between the name, address, and city state & zip. My reason for this was so we could copy client info with a single copy and paste (like from an email). But, on the final report, it needs to have these three parts split up into different lines, or even different textboxes. I can't find a way to do that.
View 1 Replies
View Related
Jan 30, 2015
Is it possible to use find and replace to modify text in report design - or else is there something else I can do to get the same effect? I have a really useful report and I want to modify it for use with a different dataset. To do that I will need to change the text in over 150 text boxes. I have seven different fields which each occur over 20 times in the control source formulas in the text boxes, because they are used in different ways in different calculations. If this was excel I could do a simple find and replace to change e.g. every reference to fieldname OLD to fieldname NEW, but I cannot see how to do that within access report so am haveing to click on each text box in turn, go to properties and edit the text box .
I am trying to switch to a more general naming system in the modified report so then I will be able to assign data with the required fieldnames for the report within a query. But the report I am starting with has field names based on years 2013, 2014, 2015 etc.I want a quick way to change each reference to those field names to my more generic new field names.
View 2 Replies
View Related
