Reports :: How To Keep All Yes / No Fields In Report On Same Page
Sep 4, 2013I have a few fields "yes/no" in report and I want to keep all of this in one page when I'll print it. How could I do that.
View RepliesI have a few fields "yes/no" in report and I want to keep all of this in one page when I'll print it. How could I do that.
View RepliesI have a report that should only show 1 page yet I have 2 and one is blank . I cannot find out why?
View 3 Replies View RelatedI'm using Access 2010.My reports are all crowding the left margin, with the reports printed in Landscape being the worst.My Page Setup shows Top and Bottom margins are 0.2 inches, Left is 0.35 and Right is 0.213.
Paper size is 8.5 x 11, in Landscape Mode.
1 column.
Column is 10.4"
I'm getting that error that says that the report is wider than the paper so I may get blank pages, but I don't. It just prints the 6 pages of the report.The Report Property Sheet says the report is 10.5104" and I cannot for the life of me get that to change.
When it prints, there is absolutely no margin on the left side (in landscape mode). When the report renders on the screen, it appears to be perfectly aligned.Reports printed in Portrait mode have extra white space at the top, with the footer being printed right along the bottom edge of the paper.
I have a report that is generating a few pages, but I am only interested in the first page only. I have tried adding in code to cancel everything after the first page, but this just gives me a blank second page:
Code:
Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer)
Cancel = Me.Page > 1
End Sub
Private Sub PageFooterSection_Format(Cancel As Integer, FormatCount As Integer)
Cancel = Me.Page > 1
End Sub
Private Sub PageHeaderSection_Format(Cancel As Integer, FormatCount As Integer)
Cancel = Me.Page > 1
End Sub
I am outputting this report to PDF, and it is very annoying to have a blank page.
Is there a way to force the report to only be one page in length.
We recently converted to Access 2010 after using 2000. This problem has suddenly appeared. It doesn't happen on every report but there is one in particular right now and I can't figure it out.The first page of the report is complete but it prints a second page containing only the page header and footer, the rest blank. There are only 2 detail records on the first page and plenty of blank space.
It's not the issue of the page overflowing onto extra pages because the page size bleeds beyond the margins. Everything is safely inside the set margins, and in fact as a test I brought the page width down to 4 inches with .5" margins and it still prints a second page.
I am having a DB and a report is there from query now what i want is ;
if query fields are apple, bat, cat, dog, elephant and I want in report the first three fields like apple, bat, cat to be displayed at first page then remaining on next and so on. Whereas I have a proper report header and footer which I do not want to change for any page means will remain same for all pages..
How to set my report page view 25 row...
View 3 Replies View RelatedI have a 14 page report in which I want the footer to appear only on the first page. I accomplish this with some code in the OnFormat event of the page footer:
If Page > 1 Then
Me.PageFooter2.Visible = False
Else
Me.PageFooter2.Visible = True
End If
The first page has the footer (great).
The 3rd thru the 14th page does not (great).
The 2nd page also doesn't have the footer - but - it only shows a half page of data! The data continues where it left off on the third page!
So, to sum up:
1st Page: Footer with detail section containing 16 rows of data.
3rd thru 14th Page: No footer section with 28 rows of data.
2nd Page: No footer with only 16 rows of data.
I have a complicated report in which there is a main report which contains other reports within it. One of these reports (call it "Number Six") within the main report has several subreports. Within this report, I can successfully cancel the subreports so that they do not print if the data does not match the right criteria. I use VBA code to cancel the Number Six report if none of the subreports will be printing. Nothing then appears on this individual report. All I get is a blank page which makes sense since I've shrunk all of the subreports.
When the main report prints, the Number Five report prints, there is a blank page for the Number Six report and then the Number Seven report prints. How do I get the main report to not print that blank page for the Number Six report? When the Number Six report will result in a blank page, I want the Number Five report to print followed by the Number Seven report. I've tried using "No" in the main report for the Enabled option for Number Six but the blank page still shows up. I am not forcing any page breaks either.
I'm using Access 2003.
Is it possible to set the top margin on the first page of an Access report different from all the other pages?
I have report &/or form which lists booking availability, basically a list dates & number of spaces. I would like to publish it to my wordpress website somehow, preferably quick & easy, not too much export import etc.
Access 2007.
I know I can export to html just note sure if this is the best way & how I then publish it to my wordpress site or upload via ftp hopefully from within Access.
Thought about google spreadsheet, this can be very easily integrated into Wordpress, html code provided.
How to get data to google? Just not sure how it could all fit together or even possible.
Also this export to html does not format very nicely, just black text so far, my report has colours & background colours (mostly from conditonal formatting)
There are a few wordpress plugins that have calendar availability apps but assume the data in web based (database) and no way to get at this.
I have a report that needs to show about 20 different fields from 24 records. I have it set up in landscape view, with one record per line (running horizontally). It allows me to show about 15 of the fields, spanning two pages (wide). I don't know how to add a third page to show the remaining fields.There are no Groupings.
Also, is there a way to "wrap" text in the column header?
While creating a report , I find that the number of fields are more for a single record, and cannot be accommodated in a single sheet of A4 size paper(Landscape). So what is to be done so that all the fields can be incorporated in the report for a single record on the same page? I don't mind if all the fields for the single record are displayed in two/three lines on the same page.
View 1 Replies View RelatedI have a report that's oriented landscape. I have scaled and placed everything to fit on a 11" x 8.5" page (the current dimensions of the report are 10.375" x 7.75"). The Layout view shows that everything fits within the borders.
Despite all of this, Print view insists on including a second, blank page. And since the general user will initially be viewing it in Report view (which doesn't indicate 2 pages), then printing if they so desire, they won't know there's a blank page.If not, I'll just tell people to make sure to only print page 1 in the printer dialog box.
I have an access report that consists of numerous other subreports. My issue is that one last blank page prints at the very end of the report. All margins are sized correctly and have set the 'Force New Page' setting to 'None' for all Group Headings (I should mention that I have each subreport within it's own group heading...so a total of 8 subreports in 8 group headings). The odd thing is that I have the page #'s printing in the page footer and on the last page it's printing page + 1 of x pages (e.g. page 129 of 128). I have removed the report header and footer, but have the same result. None of the other subreports produce an extra page when run separately.
View 2 Replies View RelatedIs there away to have the report footer only to display on the first page?
View 4 Replies View RelatedI have a 2 page paper form/report (however you want to categorize it) that I manually have to fill out and submit every month. I am trying to digitize this process using Access but am having difficulties. This paper form is actually pretty simple. The top third of both pages contain just static information like company name, address, phone and etc. The "detail" section of page 2 is basically laid out like a crosstab query. The only data involved in page 1 is grand totals from the crosstab query on page 2, plus an additional calculation.
How to create an Access report in this specific format. I was thinking along the lines of scanning these pages and attaching them as an image in the report and just overlay the data on top of in in the appropriate locations. But this is proving to be difficult as I am getting a whole new page with each new record of data, yet alone was able to figure how to get a different "format" of data on the second page.
Completely recreating the paper form as an Access report is not "impossible" but would prove to be difficult with the limited formatting capabilities of Access reports.
How I could create a report like this that can be printed with 2 different pages. As stated, page 1 is just a total of the data in page 2 so the actual order of the pages laid out on screen or printed is not a big deal.
I have small database in ms access which i am using for invoice creation. When invoice is created i save it as PDF. I would like merge another single Page PDF along with the report as 2nd page so end report is 2 page PDF.
Second how can i get 1 PDF from 2 ms access reports.
Any way to repeat the Report Header on every page?
I had my header in the Page Header so that it would repeat on every page, but it did not have the CanShrink option so I put it in the Report Header so it shrinks when I want it to, but now it doesn't repeat. I was hoping there was some kind of code I could implement that would let me repeat the Report Header on every page.
Or is there a way that I could get the CanShrink property in the Page Header?
Is it possible to add a front page to a report?
View 3 Replies View RelatedI was searching for a solution to this problem and found a thread called "Changing page numbers?" from 2012 but it is not clear : [URL] .....
I have two issues with my report. The first is the page number. The print control on the correlating form allows the user to print a range of reports based on the TransmittalID number. TransmittalID #1 is a 2 page report and #2 is a single page report but when I choose print from ID 1 to 2 the page numbering says page x of 3 instead of page 1 of 2 and 2 of 2 for ID #1 and page 1 of 1 for ID #2. Following along the thread above I managed to reset the page numbers to restart at 1 for each page but that is as far as I got. I'm not sure where to enter the code that was provided.
My second problem is that the report footer contains a signature line; however, printing a range is resulting in this only showing on page 3. How do I set this that for each new ID# start a new report. I've tried force new page, inserting page breaks but no luck.
I have a database that is strictly for generating and printing work orders. Our supervisors use it to print new work orders on the fly. normally that is fine. I have the Vb to print that specific work order
what I need to create is a VB that would allow other people to create a work order that would email it to the those supervisors. email addresses will always be the same. I just dont want to send the entire report.
I need to have the last page of a report in access print to an 8.5x11 instead of 11x17 (the rest of the report has to print 11x17). No clue how to set it up so it's automatic...
View 2 Replies View RelatedI have an access table stored with information of different people. Each person has his own personID. To print that information i need 1 page per person. So I made a report grouped based on the PersonID and inserted a pagebreak after that section. It worked perfectly untill I needed to customize the layout of each page based on other information of the table.
For example; I want the textboxs for person1 on the form to be put closer to each other than for person 2. I use VBA to control the layout of the report which worked perfectly, but i dont know how to control the layout with VBA for each specific page.
I have a database of musical events. Now im creating flayers for each event. My Q is how the Information for each event should fit on one A4 page and should start on a new page of the report.
View 2 Replies View RelatedSend only one or two pages of a multi-page report. I have a report that has three pages. I only want to send the first two as a pdf file. Can this be done with VBA? I know it can be done using Exporting Data on the External Data ribbon, but how can I do it via VBA?
View 4 Replies View Related