Reports :: Inserting Page Break To Show Week By Week Pages
Feb 11, 2015
I've created a report based on a query that shows me the jobs that have been added to tblJobs between two selected dates.
The report works fine and displays all the information I need, however other than being sorted by day of the week i.e. Monday, Tuesday, Wednesday etc. The records just run on one after another.
I want to create a page break, so that a full week is shown on a single page before then forcing a new page when it moves in to the next week.
I'm setting up a query which will eventually run as a report to show sales within a specific date period and so on.
In my table "tblJobs" I have a field named "JobInputDate" - this will act as my date source, everything else included within the query works fine, i.e. costs etc, etc.
The format of the date field is Short Date and the default value is the date the entry was made to the table, this obviously uses the =Date() expressing to generate the date.
Now, when I come to building my query I want the dates to be shown as a day of the week, so that when I eventually build my report, I can group them by day.
I've looked through the various threads on here which all point to using the Format([YourDateField],"dddd") format. However when I run the query I get the "Data mismatch" error.
Dear All, I have a field named: “reminder date” in a query and would like to show only records where the reminder date is within the next week whenever the query is run (ie if todays date is 26th may 2006 and I run the query now It would only show records that include the following dates 27,28,29,30,31, july and 1,2 June)
Ive tried the below bit of code but this shows to many records beyond one week. >=DateAdd("d",+7,Date())
I'm planning to create a form that would show total number of sales transaction per week: If today's month is February, i would like users to see records like this: (Week should start on a Monday and ends on Saturday)
How do I get the day of the week to show up on form? when I set the default in the table, I want it to read Fri. 8/29/14 not just (8/29/14) or what ever day that field has focus.
When using the Format:'yyyy mm dd' in access queries. When trying to show a week is there a way to show the date range instead of week number.
Week 01 = Jan1-7. If the results are only week numbers that makes it hard for people to understand when it actually is. Bottom line is: I would like to convert Week number to actual date range. Can anyone help with this?
I am trying to page break my report to have it where the first name and surname of the employee has a separate page with the details of each appointment.
I have tried to do it via format on properties but it does not work..
I have attached an image of how the report appears.
I need a report that show Total ordered for week by Fish for a single customer. I have customer table and OrderDetals table with order date. Shipping date Monday to Friday. When preview the report the it shows the current week Total order quantity for each fish for single customer. How do I get this.
I created a report that would generate, among others, a listbox on monthly payments. How do I make it spill-over to the next page when its contents have already exceeded that of a single paper?
I have been working on this for over a week in Access 2010 and I know that I am almost there, but need getting over this last hurdle as I have a severe case of tunnel vision on this while I am trying to get it to work.
I have a Main Report based on my Element table and a subreport based on my OTC table. There is a one-to-many relationship between the Element and the OTC table.My Master / Child Fields between the two reports are as follows: ElementID;GroupNum
My SQL for the Main report is:
Code: SELECT Val(DCount("*","Element","ElementID=" & [ElementID] & " AND Step <" & [Step]))2 AS GroupNum, Element.ElementID, Element.ProcessID, Element.ModelID, Element.Step, Element.ElementDescription, Element.RevDate, Element.GPCFS, Element.TrainingGate FROM Element
[code]...
As an example in testing this report, I am looking at a specific Element with 33 records and a total of 72 OTC records. Each of the 33 records can have 1 or 2 or 3 or up to 4 OTC records but the report is only 17 pages which tells me that the page break is occuring based on the ElementID and not on the OTC records....
I have a report which is grouped by employee number - each group can have one or many records displayed - it works fine, but can look untidy sometimes when there are more records than will fit without wrapping onto another page; this is particularly prevalent when there are two or three groups - the third one may run over onto the next page, without group headers.
Is there anyway to force a page break at the bottom of a group if that group is not going to fit on the current page in its entirety?
I am writing a book, using MS Access 2007 (seemed like a good idea at the time I started, and the report that creates the formatted book content works quite well).
The book content is "per paragraph" which gives me total flexibility to move content to whatever spot in the book I might wish, simply by changing the paragraph number (free field, not auto-number primary).
To save paper (or pages) in printing (or viewing) the book, I have the report printing off para by para (as many whole paras as will fit to a page). This is fine but I want each new chapter to start at a forced new page, for "presentation"/appearance sake.
The relevant fields for the purposes of this post are:
paranumber paratext chapternumber forcepageifticked (a Yes/No box), which goes with each paragraph and which I thought might come in handy, I had in mind to link it to a page break control at the top of the "detail" part of the report in design view, and which would be "invisible" except if the report formatting process had got to the start of any chapter, and the Yes/no box was ticked.
However, since the week beginning 12/26/05 crosses over both '05 and '06 (as week 53 and week 1), I get two groups of dates recorded for the week of 12/26/05 when I run my query.
Since my chart is based on weekly totals, I can't have two separate totals with the same 'week beginning' date.
How can I adjust my code to get one total group of dates for the week of 12/26/05?
I've restructured my 'application' to have one table and a lot of query/forms. In light of not figuring out the combo box situation I altered the requirements and what I needed thinking I may have an easier go of it, but alas not exactly my experience. I have 5 reports that I want to filter them by week(start of the week). I have a function which can turn any regular date entered to the start day of the week(monday). I thought my best way about this would be to fill a combo box with all the accepted dates through a separate table's column.
Is there a way to pop a dialog box when the user clicks to generate the report that will prompt them to choose a week then run that criteria against the report and only bring back that date?
Im creating a database that we can enter jobs into.A job will consist of 3 seperate parts, Called "Trusses", "Walls", "Posis". They will each have a different delivery date and possibly a delivery time.
I am having trouble creating a report that gives me a week view, Monday to Friday, that shows what deliveries are on each day.The main thing here is there is one job entry, with the 3 parts. So there will need to be 3 seperate entries on the report for each part of that job.
how to build a weekly report to count the number of computers that have entered a defined process. I have four processes and I need the report to show counts for each process even if it's zero. The report is supposed to show the history of each process and not just the current week. Is this possible to do in a single query? Or do I have to make multiple queries?
I have a table that holds the history of each workstation including the workstationName, date of the record, the phase of the workstation, and the status of the phase. Another table holds the phase codes and phase statuses for lookup purposes.
I was able to create only 3 pages in access report. I am not able to go beyond 3 pages since the page footer is not moving down, means I am not able to drag it down.
It is a simple report of resume with only text boxes. My report comes around 10 pages.
Send only one or two pages of a multi-page report. I have a report that has three pages. I only want to send the first two as a pdf file. Can this be done with VBA? I know it can be done using Exporting Data on the External Data ribbon, but how can I do it via VBA?
I've been asked to edit a current report that lists our production in week number order. I need to look at way we can 'flag up' orders that are within a 4 week period from the current date.
For example,
10 Orders in total in our database. 5 of which are due the drawings back within 4 weeks from today (26/02/15). I'm looking for a way for the report to show the 5 orders as priority, either by formatting the orders in bold, a different colour or under their own heading/group.
I have a database of high-school football players, and I am looking to print out single page reports (or forms) that will show detail from several tables and queries. This will act as their resume when they visit schools on recruiting visits. The reason for needing query items, is that I have developed queries that return the most up to date height, weight, 40 time etc., and that single most up to date number is what should print, not the entire table. When I try to build a report it will let me bring in multiple tables, but not queries.
