-if the result of a test is more than the normal value , i want up marked .
-if the result of a test is less than the normal value , i want down marked .
-if the result in the limits of the normal value , no marked.
is there an way to mark the result of any text search with diffrent color according what i am looking for in the entry screen
ie : when i want to search about "dif" at the upper text it will come the result like the down line :
"is there an way to mark the result of any text search with diffrent color according what i am looking for in the entry screen"
thank you, best regards
I am using 97 and have been running into problems with tutorials from microsoft since they are in 2000 format. Its not a big difference so maybe I just cant figure it out...
Anyways, I wanted to make a list of the reports I had for the user to click on one and have it pop up. Anyone know how I can make this list?
My idea is to somehow create the names in the list box using a query or something and have them be links to the report somehow...
Please help...Thanks :)
I am selling some products, namely A to M. I record the orders of costumers in a table, named "orders". For example, if costumer "Jack" has ordered as the following:
Code:
ID costumer product quantity unitprice orderdate
12 jack A 4 10 25/11/2014
13 jack B 5 5 25/11/2014
14 jack C 1 4 25/11/2014
15 jack F 3 2 25/11/2014
16 Jack G 4 8 25/11/2014
17 Jack H 1 7 25/11/2014
Then I make a report based on the above table and issue that as the invoice to the costumer, who is jack here.
How can I make a unique invoice number, which automatically increases sequentially for each invoice? Do I need to add a new column to the table? I also need to be able to look for a specific invoice based on the number, or date.
I am having a small issue with creating my report, that being I am actually trying to create two different reports in one. I first need to report how many of an item is located in each location.
Then under that I need to list the serialized items of each item in each location. I can run them both just fine separately in the detail section of the report but I can't seem to get them to both run at the same time. I would just put them together so it reads
Location
Part number
Serial number
Serial number
Serial number
But my boss told me that's too much detail in on place at one time for the customer.
Is it possible to add a second detail section to a report, or something that is equivalent and do the same thing?
I am making some attendance sheet on access as follows
Name !09:00!10:00!11:00!12:00!13:00!14:00!15:00
------!-----!------!-----!------!-----!------!
Test1 !Prsnt! ! ! ! ! !
test2 !Absnt! ! ! ! ! !
test3 !Vction! ! ! ! ! !
I have tables like
workersmaster(workerid,workername,joiningdate,stat us)
Workerdetail (Workerid,workername,entreetime,attendance)
timing(timing(0900to1500)
Now I wanted to make report as mentioned above, how can i do this?
I made a report with following crosstab query.
TRANSFORM Workersdetail.workername AS CountOfedate
SELECT Workersdetail.[attendance], Count(Workersdetail.[edate]) AS [Total Of edate]
FROM Workersdetail
GROUP BY Workersdetail.[Workername], Workersdetail.[attendance], Workersdetail.[workerhourenter]
PIVOT site+Cstr([workerhourenter])
I wanted to know that, is there any option through which my report gets autoupdate or refresh incase of addition in SITE field (as mentioned with PIVOT)?
I have a form with a Yes/No checkbox. Sometimes a data entry person will use this, sometimes an associated report is printed and a technician in the field will be required to fill check the box by hand and return the report for data entry. what I have tried to format the check box, if the box isn't already checked, I can't get it to show up clearly on the printed report. It's set to Visible, width 6pt, solid, black, always display, yet it still is barely visible. Ive tried increasing the grid line thicknesses, making it shadowed, nothing seems to work. Is there anything I can do?
View 9 Replies View RelatedI am using mail merge to add info from my database to my word document template. I want to make it the same as my form I have set up which gives me a patient name, dob, GP details as head of main form then a subform (continuous) of their medication. When I try a mail merge it comes up right but only shows one medication on each page. I want it to add all their medications to the body and have the patient info in the heading. Do-able?
View 3 Replies View RelatedI have a report that displays on a continuous style report. What courses the employee have been on and when they expire
right I have field call expirydate and another call dayover showing the number of days till that course has expired also I have made a label called Expired1
now what I'm trying to do.....
if the expirydate has passed I want the expired1 label to be visible and dayover field to become invisible
I have tried
Code:
Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer)
If Me.Expirydate < Date Then
Me.expired1.Visible = True
Me.DaysOver.Visible = False
End If
If Me.Expirydate > Date Then
Me.expired1.Value = False
Me.DaysOver.Value = True
End If
I have also tried the code on current event on the report
now my problem if one of the course has expired it will show the label called Expired1 but on all the records but I only want it to display on the record that has expired and leave the daysover text box visible if course has not expired
I have an image field on a report that keeps showing up even if the field value is null.
=IIf(IsNull([Image_tbl4mgr21]),"",[image_tbl4mgr21])
How to make the white space completely disappear when that image field is empty?
I have 2 tables on one report, 1 is visible, the other visible = no, Is there a way to make that visible = yes when you reach a certain count (60days)...
View 1 Replies View Relatedi have a database. the database have a table called CardDetails in this table there is like 1000 rows.The table have a field named MedicalId. and i have a folder . it's destination (D:CardPic) . this folder contains 1000 pic has the same names as the medical ids....i need to make a report and show on it these pic's the database doesn't have a afield that contains the path.i need to auto display the images on the report depending on the medical id.
View 10 Replies View RelatedI have a table that shows "DONE" and "REMAIN" for each "AREA" like below:
Code:
AREADONEREMAIN TOTAL
AREA1100200300
AREA2200300500
AREA3200700900
Now I like to make a report that shows "DONE" and "REMAIN" in each AREA with pie chart, now I have problem how I have to do this job for the graph, how should be "row source" of chart control. What query needs on this table?
Is there a simple way, or special event, that can be used to turn off the visibility of fields when they are in the detail or in a created header for a field?
I tried using the report's Load event, but this kept giving me errors. Are any of the events in the detail able to allow this?
I have a database and one of the functions is to track the purchase of fuel. Part of purchasing fuel is registering what the current odometer reads. My query gets the Vehicle ID, Date of Transaction and Odometer reading. I want to show a report that shows how many miles the vehicle is has traveled for a certain amount of time. If it's for 2013 then I'll put the criteria for 2014 in the date. This will give me a list of all vehicles and their odometer readings. I then sort the date by ascending.
In the report I group on vehicle ID and then I want to show all their transactions and add up how many miles were driven.
Vehicle 1
1/2/201
1/5/2013
1/15/2013
ETC...
Total Miles Driven in 2014: XXXXXX
I have a main report / subreport relation, just want to have a fixed length of each printout. e.g the total number of lines of the subreport should be 8 lines. However, lots of subreports contain records less than 8. I would like to know how to insert of blank line in the subreport depending on the records with content at each print, in order to make the total number of lines in each subreport is 8 each print!!
View 1 Replies View RelatedI am building a report that has a header with several details followed by a detail section.
What I need to do is make the entire entry not visible on the report if one of the dates is null.
So it looks like this
last first title id memb # date a date b
1. smith , john fng 8521 2356224
5/12/2012 6/20/2013
10/2/2013 (is null)
2. neckbone, jim dude 2548 85858412
6/20/2013 5/5/2014
8/5/2013 2/31/2013
On the report i want the 1st entry (smith john) not to be visible due to the null (B) Date.... but i want it to be visible once the date is entered...
is it possible with transform, only uppercase text contained in a report textbox, to bold? How? Through VBA?....
View 1 Replies View RelatedI'm currently working with a form, which is in datasheet view. I have many rows which are combo boxes (yes/no), and the name is rather long. So each line (each row) spreads on to 2-3 pages to the right.What I would like to do is make the namebar, on top of every column, a little bit higher, so the name would be split into two lines, or three. Allowing me to make the width allot smaller.Here is an example of my problem:http://213.213.137.96/~terminal/columns.jpgSo my question is, can I change the height of the column name? Or is there some trick I can use?regardsFrímann Kjerúlf
View 1 Replies View RelatedWould it be ok just to make a copy of the BE file (every so often) rather than to make a copy via code?The user can then just paste over the original if it becomes corrupt.
View 4 Replies View RelatedI have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.
1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)
2. If user presses the Print button before pressing Save button then system should prompt user.
Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):
Private bSaveClicked As Boolean
Private Sub Form_BeforeUpdate(Cancel As Integer)
If Not bSaveClicked Then
MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation
Cancel = True
[code]...
I am editing a database that provides the option of creating custom reports, where the user can input a date range of their choice and receive aggregate data for that time frame. Although all of the numbers in the report are correct, I am having trouble with a chart that I inserted into the report.
Specifically, if the date range requested spans 2 calendar years (i.e. April 2014 through January 2015), the data for January 2015 appears at the beginning of the year (so the chart x-axis is for Jan through Dec, and the Jan 2015 data is showing up in Jan (as if it was 2014, not the end of the given range in 2015). When I try with smaller time frames within a calendar year, it adjusts just fine (i.e. shrinking the window so just March-May is displayed on the graph).
How to adjust the axis so that it properly records the data range- so that it would start the axis with April and end in January, for example?
In my tables i have used calculated fields. one of the fields is to "total expenses." In a report, i need to show the sum of all the "total expenses", the filed populates in the report but the cents are missing. for example if the amount is 6080.40 it shows as 6080. how can i get around this? I have tried changing the decimal point value to 2 at which point the value turns to 6080.00 when it should be 6080.40 (i am a beginner at this i am assuming the answer will probably involve c++ or visual basic's, two concepts i am not familiar with.)
View 2 Replies View RelatedI am still trying to get a hang of development in access 2010.
I would like to design a form with a listbox or a combobox which holds all 8 of my reports (a table has all the reports), with a Print and a Preview view buttons. In addition, the user must be able to select if they want to view the report by month, quarter and the year in question.
How do i have a specific report print or previewed based on the value selected in the listbox or combobox and the date criteria.
I have a form that the user can add Work Order numbers to a text box and pass them to a listbox to collect 1 or more values. Each of which need a separate report with the labour hours for each Work Order.
I am having issues figuring out how to get it to pass them to a query or filter the reports.
I have tried many different examples and nothing seems to work.