Reports :: Making Labels With Report - Repeating Label
Jul 18, 2013
I am making labels to stick on containers that we're shipping out. Some shipments will have only 1 container and some will have more than 1.Can I have it repeat a label if there are more than 1 container for an order?
For example:
Shipment 1 has 3 containers. The label says "3 x DM" and it will make one label.
Can I set it somehow to print that label three times? What about adding incremental text, e.g. 1 of 3, 2 of 3, 3 of 3?
I've created labels in my database and when I print them on a label printer, I get a blank label in between my printed labels. I've checked the printer settings and properties and can't find anything. I've also checked the database properties and can't find anything. Is there something in the database that I'm missing?
I have a report that should print on labels ready to be stick on a book, but how can I tell the report to start from 3th row 2nd column so I do not waste any labels?
1Create a report called rptCustomersByGender. The report should:
a.Print your company's name at the top of the first page only b.Print your data labels at the top of each page c.Group your data by gender d.Display all the customer information in the detail section e.The customers should display in ascending numerical order by Last Name f.Below the list of Female customers, it should say: "Total number of Female Customers:" and then the total number of female customers should display. Do the same for the male customers g.The page number should display at the bottom of every page h.The list of Female and Male customers should each print starting on a separate page. i.Make sure the report runs without producing any errors and looks professional.
I created a report and grouped it by gender but I can't do step F. creating two different labels for each group..
I have a non standard size report (for printing labels)
The report is just over 10cm wide and just over 15cm deep.
I have solved the blank pages caused by exceeding the width but I'm still getting a blank page when I move some data down. I am still within 15 cm but it's throwing me a blank page. Even if I extend the in design mode depth to say 20cm (ie the height in Detail) it's throwing a blank page (I can see this in print preview).
I initially set up the report (it's a long time ago so memory fades) using the label wizard setting up a label 4*6 inches (10.16 * 15.24 cms) and it is this i'm trying to tweak. Is there a property I'm missing somewhere?
I have always noticed that when creating a report, when you make a paragraph using a label, the alignment and size of the text/paragraph is always different when you preview the report than when you design it.
This makes alignment of paragraphs tricky, especially when you are trying to insert a bold faced word into the middle of a block of text by using a separate label.
I have a report reading directly from a table. Table has a text field "txtOldState" where the field data a 10 digit number.
Also have a directory with .png files named with same 10 digit number. The txt field is on the report - I need to print the associated .png file on the report along with the 10 digit "txtOldState" field. I'm failing at pulling a png from the folder to print on report.
I have the following code of my holiday calendar however I would like to convert the month into uppercase. I know about the 'Ucase' function but I am fairly new to this and have tried to place this within the code but with no success:-
With theReport .Controls("labelMONTH").Caption = Format(StartDate, "mmmm")
Can I display the weekday in a label on a report? If so, how? The record source for the report has a variable "StartDate" and I want to show the day of the week (Monday, Tuesday, etc) of this date in a label.
I'm running Access 2003 and my question relates to delivery notes that are produced for drivers as reports. These delivery notes have a blank payment box for the driver to complete if the customer pays upon delivery.
As more and more customers are prepaying by credit cards, I'd like this payment box to be automatically filled with a "PAID" text which will let the driver know the order has already been paid for.
The delivery note is produced from an "Orders" table which has a "Paid" field whose value is automatically set to "Yes" when the order has been paid for.
I was hoping to be able to place a "PAID" label on the report which is only visible when the Paid field of the underlying query is Yes.
As things are at the moment I cannot see any way to put any conditional statement onto this Text/Label. The only options for the "Is Visible" property of the text are Yes or No.
I have developed an Access Database for my Co-Op work term workplace, and everything seems to be running smoothly with the exception of the report generation phase. The company I am at has a set template for all reports (Clients column always goes in a specific place on the page, and the report always contains the same categories in the same locations; things like that). The problem is that, every time I go to make a new report, I have to re-format and re-make the report. Is it possible to save a report`s format so that, when I go to make a new report, it automatically applies that format to the data being used?
I have created a report with the report wizard in Access 2007 that includes a check box. The check box is located under the label but to the far left side. How can I center the check box under the label?
i have been trying to figure out how to make a textbox if it is null to be invisible on a report.
I selected the detail section on the report, under the Event tab, On Format option then selected [Event Procedure] and then clicked on the ellipses.
Tbl_Receipt_Description is the name of the text box. ******************************************* If Me.Tbl_Receipt_Description = " " then Me.Tbl_Receipt_Description.Visible = False Else Me.Tbl_Receipt_Description.Visible = True End If *******************************************
I have the following info in a table - I am trying to make a file to import into a label printing program. I have qty 5 of item X13 and so need 5 labels for it, 3 of X24's and so on. The output is basically a print file that will print the right quantity of labels for each of the names equipment.
Name; number X13; 5 X24; 3 X77; 1
I need an output file as follows, in excel or query result:
X13 X13 X13 X13 X13 X24 X24 X24 X77
How do i achieve this in a query or do I need code and if so what would it look like..
I previously used an older Access version under XP, but I switched to Windows 7 (64-bit) and Access V10. In general, most everything appears to work as expected, but I can't be sure because I have not gotten past the "previously simple" task of making a simple label !!!!
When I construct a LABEL layout, if I use ONLY one field per line, everything appears to work OK.When I put MORE than one field per line, the additional lines are "accepted", but when I click "finished" to preview the finished labels, I get an #error on every line that has more than one field, but the lines with only one field print out as expected.If I then go into the DESIGN mode, each line with more than one field displays:
=Trim([field-x] & " " & [field-z]), where the " " is related to the space I place between field-x and field-z.
During this process I also get a box with the message "Enter Parameter Value", and below that is the text, "Trim", with a box in which to insert some kind of "parameter". I have absolutely no clew what to put into the "box", and no where in the 812 page, "The Missing Manual" is the question answered.I have wasted approximately five hours trying to solve this issue, including google searches for potential answers, some of which seem reasonable, but do not work when implemented. At this point I am ready to trash ACCESS and move on to some other process.
I have a form (frmMain) which contains 3 subforms and they are being set to visible at different stages of application run (depending on the options selected).
In subfrm_Main_options i have 3 buttons, clicking on 'Job Review' will make the subfrm_Search visible. In the subfrm_Search i have 2 labels, 'View Jobs' and 'View Report' and I only want the 'View Jobs' to be visible!
I have tried setting the visible property of this label to False in the subfrm_Main_Options but its giving me an error (saying the form subfrm_Search is closed or does not exist in the database!). I also tried using a Global Variable (ViewJobs - declared in module mdlPublicVars) and set it to True once the 'Job Review' is clicked in the subfrm_Main_Options form, and then look at this in subfrm_Search and then display the correct label. However after trying to put this code in various events such as, On Open, On Got Focous, On Activation, ... i didnt get the result i wanted!
Can any1 please help me out with this. I would be really grateful!
PS. The buttons appearing on the form are placed on the frmMain, I did that to see if it appears on the main form but they must be in subfrm_Search!
I sent a post earlier today about making a label visible in a subform! I am still working on it but still no progress!
I have a different scenario (its the same thing but trying to explain the method i'm working on):
I have one main form (frmMain) that contains 3 subforms, say subfrm1, subfrm2 and subfrm3. On Open only 1 is visible and 2 and 3 are invisible (however they are open and loaded).
By choosing an option on 1 subfrm2 becomes available! When choosing an option on subfrm1 a boolean called 'XXX' is set to true. Now i want one particular label to become visible in subfrm2 if 'XXX' is true! To do this i need to write a code to be executed when subfrm2 is appears on screen! The problem is this form is already open so how and on which event of subfrm2 can i write the code???
At the moment i'm trying to refresh subfrm2 (by using code in subfrm1) and I have placed my code on the On Load event of subfrm2. I thought this way the form will reload and the On Loand event will pick up the new value for boolean XXX and set the label to visible! Thats the idea anyway... here is the code i have in subfrm1:
XXX = True
Forms![frmMain].subfrm2.Form.Refresh
subfrm1.Visible = False
subfrm2.Visible = True
I'm not sure if refreshing the subform will result in On Load event to be executed! And i'm not even sure that the code for refreshing subfrm2 is correct. Can any1 help me with this?
I have attached the actual database on my previous post sent today, if you prefer to look at the whole thing and get a feel of the problem!
My query has the fields setup ID, Date, Session, Value.In a report I am trying to create a bar chart that shows session names on the y axis and values along the x axis. I want to show 1 chart per ID.However, when I run chart wizard and create my chart I am getting charts for each ID repeating by the number of sessions (number of records in my query).So for example with 3 sessions im getting:
Where the chart is setup the way I want it, but it repeats for each session.how I can get the report to show 1 chart per ID?I tried grouping by ID but didn't seem to work
I print a report onto labels (Avery 5960: 3 columns of 10 labels on a letter sized piece of paper). The report and labels print fine BUT...
I need physical page breaks between certain sections. When I click on "keep whole group together on one page" in the "group by" section of the report, it starts a new COLUMN of labels (which Access sees as a new page), but does not force an actual new piece of paper.
I have a command button that opens a report. The report has many subforms in it. I am sending open args which existingstewardship. I want one of the labels of the labels to be visible if the me.openargs = "existingstewardship". the code is not working. I have tried to debug when I do this I have found the open args are null and I am wondering if the open args are null is this because they were sent to the main report from the command button and the subforms in the main report do not get passed the open args.
Does anyone have any idea ? how I could make the box visible or not visible in subreport from the command button. The other option I have would be two different reports. Thanks PWF
I have created a report to display a bill of materials (boms). The report works as I have designed. I have also figured out how to filter the report using the docmd.openreport vbasic call with filters. This works fine. I use a form to select the filtering I need in the form of 2 Listboxes populated from tables. The form opens, the report generates and displays in preview mode. What I cannot do is the change the title text (Text Label on the report Header). I would like to use the selected items in the listboxes as sources of text for these controls on the report so I can use the report over and over for different boms. ANy help would be greatly appreciated! Vbasic I hope!
I currently have a set of labels that works flawlessly - it has 2 columns and 20 rows. I have a form that I can select which label to start printing on so I use up a full sheet with no waste. [working labels attachment]
The labels I'm trying to print on now are 1.25" x 10", as seen HERE. Since I cannot rotate the whole report 90 degrees, I set up the labels to have one column with six rows instead of 6 columns with one row (landscape instead of portrait).
I copied the entire label printing process from the known working report. For my new set of labels, the label prints great if I have just one record, and/or I start at label #1. If I want to start at label #6, it just prints slightly lower on the page instead of at label #6 position (which is the bottom of the page). [label at #6 position attachment].
I am having a problem setting the margins to print labels in access. I go to page setup and change the margin size click ok and nothing happens to the label and when I go back to page setup the margins have returned to their original values. I have already selected the label printer and labels that im using.So im baffled as to why it wont accept margin values that don't cause the label to be printed over 3 labels.
