Reports :: Multiple Subreports And Underlying Data
Mar 31, 2013
I need to create a report based on how a user creates construction components of which there can be any number, e.g.
Component 1
Component 2
Component 3
...
Component n
Each component has different data.
A report is needed to show the above components. The issue I am having is this - the user can select components to be repeated as follows:
Component 1
Component 2
Component 3
Component 2
Component 3
Component 2
I have created subreports for the components but when I run the report (no master/child relationships defined for any of the subreports) I get:
Component 1
Component 2
Component 2
Component 2
Component 3
Component 3
So I created a master report (in design time) and added subreports using VBA and now I get the components in the correct sequence, but how do I get the data to show up correctly because at run time the same query runs for each subreport component and I end up with the above sequence.
Defining the subreport query at design time won't work because then the subreport for a particular component will show the same data.
I need each subreport to recognize which data to show at run time - but I am not sure how to accomplish this.
I'm trying to stay away from duplicating subreports in the case where the same components are selected.
View Replies
ADVERTISEMENT
Dec 23, 2013
I've narrowed my problem to a subreport that prints multiple copies of the report based on the number of items generated in the subreport.
i.e. If I have an instructor registered to teach three classes in the subreport, the main report will print three time (identical). An instructor with two classes will print twice (identical).
No button...just good old "print" how? why? where?
View 3 Replies
View Related
Feb 12, 2015
I am relatively new to Access. I am having difficulty summing up totals and bringing them into the main report. To be more specific I have two sup reports called WOExpenseTotalSubreport and WOServiceTotalsubreport. These two subreports are based off of queries that gather the description, price and qty of either services or expenses and then produces a "total" for me on the query.
When I bring these two queries into a report as sub reports I am able to Sum the "total" field in the subreport footer which works fine. What I would like to do is add those two totals together for a grand total on the main report. The two summed fields are called ExpensesSum and ServicesSum. It seems most things I have tried do not produce an expression error but the result is either #error or #name? Here are a few different scenarios I have tried both on the main report details section as well as the footer section.
=[Reports]![qryWOExpenseTotal subreport]![ExpensesSum]+[Reports]![qryWOServiceTotal subreport]![ServicesSum]
=Sum([qryWOExpenseTotal]![Total]) + Sum([qryWOServiceTotal]![Total])
=[qryWOExpenseTotal subreport].[Report].[ExpensesSum] + [ qryWOServiceTotal subreport].[Report].[ServicesSum]
View 3 Replies
View Related
Jan 15, 2015
I have three reports that I have used as the subreports for one master report. The master report shows the three subreports on a page.
When one or more of the subreports contains no data the master report still shows the empty subreport. I would like subreports with no data to be left off the master report if this is possible.
For each of the individual subreports I have used the On No Data event to display a message and then not open the report if there is no data. This works fine for the individual subreports but when I open the master report the "empty" subreport is still displayed.
Is there a way to leave the subreport off the master report when there is no data in the subreport?
View 1 Replies
View Related
Oct 19, 2004
I have a report with several subreports that occassionally grow. I also have several fields that don't grow. If my subreport grows, it moves any other fields down as well. These are fields that are below the subreport, but not beneath it (e.g. on a lower line, but to the left).
Is there any way to keep the other fields stationary?
Thanks!
View 2 Replies
View Related
Sep 30, 2005
I'am working with tables of loan associates, customers, companies and States versus numbers and amounts in my report and I want to create a main report with a subreport within it which shows the number of customers and their respective state that a loan associate has either written a new loan or serviced that customer and a total for each loan associate? Is there a report template out there that could address this for a complete report?
View 1 Replies
View Related
Jun 12, 2013
I have a production report with 4 one to many sub reports (material reworked, reclassified, rejected, and issued). Each of those sub reports has a sum field totaling up the material reworked, rejected, etc for that lot.
I need a calculated field that subtracts the totals in each sub report from the reported amount produced in the main report.
Should I do this with a calculated field on the report. If so how would I reference the summed fields in the sub reports?
Or should I put a summed field of the amount reworked, rejected, etc in the query the report is based on and make a calculated field off that.?
View 3 Replies
View Related
Dec 16, 2013
I am trying to create a two-page report. I used a document entitled "Sophisticated Reports: Multiple Columns and Subreports" by Rich Gorvin to get where I am now. I created two (2) separate tabular subreports representing each page then placed them into a master report using a common group header as suggested in the paper. While the two (2) separate subreports print out in the desired tabular format, they do not do so in the master report document. The first page prints out just fine but the second page prints out each line of the table separately.
I am attaching a word document of the form I'm trying to re-create in Access.
View 8 Replies
View Related
Apr 15, 2015
In my database, I have a report called "rptEventsbyEmployee" and in that a subreport called "sbrptEventsbyEmployee". The master/child link is the employee name. Everything is fine until you get to page 3 where the subreport shows twice.
View 5 Replies
View Related
Aug 8, 2014
I have a database (Access 2007) that handles a large number of consultants. Each consultant has a number of skills, has worked in a number of countries, and speak several languages. As contracts come in, I wish to generate a report based on the skill set, language and country/countries that best suits the contract; thereby identifying a group of most suitable consultants. I have designed a report with three sub reports for skills, languages and countries. Each sub report is linked to the main report through Link Master/Child fields using the ConsultantID. That's all fine; I get a report showing all consultants listing all their qualities.
Now, I want to be able to filter the sub reports on the three aspects: Skills; Countries; and Languages.
In the past, for other applications, and with the unfiltered form in preview I have used a popup form with unbound Combo Boxes to generate a string to use in the reports filter. I think I got that technique from Allen Browne, and it has really served me well.
Now, however, I can't use this technique since I can't set the filter for the sub reports. I thought that I might be able to use the Link Master Field with text boxes on the main report, but haven't managed to figure that out.
View 14 Replies
View Related
Mar 13, 2014
I have created a report that includes 4 subreports. The subreports are displaying survey results from 4 different survey channels. New survey data is added to the tables monthly so the subreports will grow in size. Is there a way to have the subreports automatically resize and push down the subreport below? Currently what is happening is a subreport will grow and the additional data disappears underneath the next subreport. Is there a better way to create a report that displays information from multiple reports that will change in size?
View 1 Replies
View Related
Sep 17, 2006
hey there
i have a main PatientForm that contains patient information from multiple tables:
[GENERAL] values
Subform - [RefMD] values (referring doctor)
Subform - [Drugs] values (prescribed meds)
Subform - [Diagnosis] values (medical diagnosis)
Subform - [Encounters] values (visits to the doctor)
what i have is a form (image attached) and i need to be able to select any combination of parameters (including state, zipcode from GENERAL, i.e. referring doctor last name from RefMD, Drugname from Drugs, Diagnosisname from Diagnosis, and VisitType from Encounters) and filter PatientForm where all the selected parameters are true..
does that make sense?
all tables are linked using the field HistNum
how do i code this? i am pretty lost right now
View 2 Replies
View Related
May 19, 2014
I have a report with an embedded subreport. It's set up in two columns, ordered across then down.
My problem is when column 1, row 1 section is taller than column 2, row 1 section. It creates a lot of extra white space as I fill in the rest of the report. Is there a way to eliminate that space or am I stuck?
View 7 Replies
View Related
Dec 1, 2006
Hi!
I have an MDB file that points to a postgres database. What I'm trying to do is to redirect it to another datasource. The database is exactly the same, but I just need to point it to a different location. I tried doing this with linked table manager by refreshing the table and enabling the "always prompt for new location". I was able to point to my new location but what happened was my MDB became readonly, I am unable to edit anything after I changed the datasource.
View 2 Replies
View Related
Jul 8, 2013
I am working on a report that will have 16 sub-reports, one right below the other. Because of the complex nature of the calculations in the groupings it seemed easier to "build" the report using vba rather than using the report's built-in grouping ability. The issue I am running into is that there seems to be no simple way to control the height of the sub-reports. I had hoped that setting "can grow" to yes would change the height of the sub reports and move all subsequent sub reports down (Allas)
As an alternative I thought too that I might be able to set the height of the sub-report control, which would make for a tricky but not impossible bit of programming, but (Again allas) I can't seem to find a reasonable way to determine the required height of the sub-report's control.
View 3 Replies
View Related
Jun 28, 2013
I have a form that I call the AdminForm. It allows the user to store administrative information about the business; business name, address, telephone number, etc. I also have as a part of the table that stores this information an Attachment Field where an image of their logo is stored in a field called, [Logo]. No problem here. The issue is that I want to use the [Logo] field elsewhere like in reports.
I've added an Attachment type control to the report and I've used DLookUp to use the image stored in the admin table, but it doesn't display on the report. There isn't any relationship between the admin table and any report so I can't join them unless I do something "unnatural" by adding a fictitious field to every record to tie it back to the key field in the admin table, (there is never more than one record in the admin table; I ensure that). That doesn't seem like the right way to accomplish this.
View 9 Replies
View Related
Jul 29, 2013
i have a table with health facilities (A,B,C,D) . each health facility has data from several months (Jan, Feb, Mar etc). the table has 2 fields (New Patients) and (Cumulative Patients) . Cumulative Patients is a total of New Patients for current month plus the total patients for the previous month. In the Facility Footer of the report if i create text boxes with data =Sum([New Patients]) and =([Cumulative Patients]) works well.
However in the Report Footer =Sum([New Patients]) works but =Sum([Cumulative Patients]) totals everything. if i try =([Cumulative Patients]).
View 8 Replies
View Related
Mar 14, 2014
I have to join multiple values into a string for summarizing data on reports and exports. This process in vba is taking up to 10 minutes to process and will get worse as the size of these reports grow.
My method so far is to query the individual items into a recordset, loop through the values, adding them to the string then return the string in the query.
Here is an example:
Public Function SO_Description(intSO As Integer) As String
Dim db As DAO.Database
Dim rs As DAO.Recordset
Dim strSQLSelect As String
SO_Description = "Profiles: "
Set db = CurrentDb
[Code] ....
View 1 Replies
View Related
Oct 2, 2013
I have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.
1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)
2. If user presses the Print button before pressing Save button then system should prompt user.
Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):
Private bSaveClicked As Boolean
Private Sub Form_BeforeUpdate(Cancel As Integer)
If Not bSaveClicked Then
MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation
Cancel = True
[code]...
View 5 Replies
View Related
Nov 23, 2013
I have a form that the user can add Work Order numbers to a text box and pass them to a listbox to collect 1 or more values. Each of which need a separate report with the labour hours for each Work Order.
I am having issues figuring out how to get it to pass them to a query or filter the reports.
I have tried many different examples and nothing seems to work.
View 4 Replies
View Related
Nov 4, 2013
I am trying to pass a date range parameter & an additional parameter (Type of Audit) to 6 subreports based off individual crosstab queries and housed on one Unbound Report ("rptFinal").I have an Unbound Form "frmDate" passing a date range and Type of Audit using [Start Date] and [End Date] to rptFinal with a button that simply opens the rptFinal as follows:
stDocName = "rptFinal"
DoCmd.OpenReport stDocName, acViewReport
In each Crosstab query, I have set the parameter criteria (in both the Parameter section & the query itself) to:
[Forms]![FrmDate]![Start Date] And [Forms]![FrmDate]![End Date]
and also,
[Forms]![FrmDate]![Enter Type of Audit]
On each subreports On Load Event, I have added:
Private Sub Report_Load()
Me.Filter = "[DteAuditDate] BETWEEN #" & Forms!frmDate![Start Date] & "# AND #" & Forms!frmDate![End Date] & "#"
Me.Filter = "[Type of Audit] = #" & Forms!frmDate![Enter Type of Audit] & "#"
End Sub
and I've set the Filter On Load property to: Yes..I can open frmDate, fill in the date and Type of Audit, launch the report and it runs with no error, I have 6 blank subreports in report Preview. The headers are showing up but none of the data.
View 2 Replies
View Related
Nov 17, 2011
This seems pretty simple but I would like to select a combo box and after the user selects the combo box (Which Is a City) I want to use the underlining query of the form to run because I am using the <>False Criteria for a command of;
IIf([Forms]![frm_Deals]![CheckCity]=True,[City] Is Not Null Or [City] Is Null,[City]=[Forms]![frm_Deals]![SelectCity].[Value])
I may have other combo boxs with other information so that is why I want to run the underlying query. I have used the After Update command of;
Me.RecordsetClone.FindFirst "[XXXX] = '" & Me!FindXXXX & "'"
But I want to requery the query under the form.
View 1 Replies
View Related
Mar 7, 2005
OK...I need a bit of help here. I have put everything together for my report, including 4 subreports, but am having a few problems.
I have been scowering the forums here and just can't seem to get these figured out...hoping you can help.
PDF of Report results attached.
Report overview: This is a grouped report and each subreport matches up to the PositionCode field. That works just fine and is pulling the correct data.
Subreports: Each subreport is noted by the headers in grey. The Composite $ Match Info and STRATEGY Salary Range subreports will always show. The remaining two subreports may not have data to show.
Problems:
1. After the 1st page of each report, it is printing out a blank page.
2. The Employees in Position subreport may or may not print out on another page(s). I would like the subreport header to also print out on any additional pages as a header (see page 3 of the PDF). The header is currently a report header. I have tried changing the header of the subreport to a page report to no avail. I want to at least have this show on the 1st page and continue on to others as the report for each position could be 3 or 4 pages, due to the number of employees in each report. I'm at a loss.
3. If one or both of the last two subreports have no data, I would like to show the headers, but nothing else (I can or cannot have a field that says "No Data"...no preference). I have read about HasData in these forums, but I truly am a novice at report writing, so I can't seem to make sense of it. I would need someone to truly give it to me in elementary speak...step by step.
Thanks so much for any help you can offer.
Melane
View 1 Replies
View Related
May 17, 2007
I have a main report that has a patient ID criteria before it opens (Click the report and it will ask for a patient ID, you enter the ID and then the report generates for that particular patient). This main report is generated off of a query. I want to be able to add a subreport to this main report to list the therapists that had contact with this particular patient. I'm able to create the subreport (off the same query as the main report), but when I run the main report with it's newly attached subreport it asks for the Patient ID over and over and over again until the report finally comes up. The report has two pages (the subreport is on the second page) so when I click the directional arrow to go to the second page, once again, it starts asking for the patient ID over and over again. If I keep entering the Patient ID number over and over and over again it will generate the correct report with the correct information. My question is, is there a way to open the main report, respond to the criteria (Patient ID) once and then the report generates without having to enter the Patient ID over and over and over again.
Thanks for any help.
View 1 Replies
View Related
Apr 26, 2015
I have created a report which contains within it multiple sub-reports, which I use to generate a document for management meetings on a bi-weekly basis.
For each of these I have the subreports filtered to a unique number for consideration that period e.g. LIKE "88/00039" which relates to my data.
In order to change this I have to manually update each of the filter commands within the subreports but I assume there must be an easier 'catch-all' method of achieving this?
Ideally I'd be looking for a command prompt so I could enter just the number sequence e.g. "88/00040" and then enter this (via a corresponding macro or similar) to update the filter commands.
View 2 Replies
View Related
Mar 30, 2014
I have four forms named [Information Form], [Evidence Form], [Subject Form], and [Vehicle Form]. The Final Form is a Tabbed Form named [New Incident]. The tabbed form has four tabs, with each tab displaying one of the forms above. I also have a Print Command Button named [Print All] underneath the tabbed portion of the [New Incident] form.
Also, All of the four forms are set to data entry - yes, so that on open they will be clean and read for new record entry. I need the [Print All] button to do, just that, print everything that has or has not just been entered into the four forms, even if some are printed blank because they were not necessary for this particular report. One thin of note is that each form on the tab has a field for the "Incident Number" which will be the same for all four forms.
View 12 Replies
View Related
