I have a very simple report that is generated from a table. There are no queries associated with this report. When new information is entered into my table I run the report and the new information appears. It has been working correctly for months. Now all of a sudden after the new information has been entered it doesn't show in the report.
View RepliesI have an Access 2010 report that is pulled from a dedicated query. When i run the report, one of the fields pull the information in both the numerical ID number and the Field information. For example, the field in question is a field for "business type"......the report comes back in some lines as Manufacturer, Supplier, distributor, or contract. In other lines it comes back as either 1, 2, 3, 4...which is the ID number form the table. I have gone through all the properties and data source and can not figure out my the information is being returned so differently.
View 1 Replies View RelatedHi All,
I have a form from with a button that exports data in to excel using the following on click code
DoCmd.OutputTo acOutputQuery, "qrySoftPDR2", acFormatXLS, "FOBPDR.xls", True 'open in Excel
The problem is that if I go in to an existing record it works fine.
However if I have just input the record then it comes out blank. I'm guessing there is some sort of record update code I can use, but I've been unable to figure oput what it may be,
Thanks again
I am looking to (on the mainform) have the user enter into a text box whatever date they would like to enter and have that value become the current date of the system. So that all operations are based off of this newly entered date.
View 4 Replies View RelatedI have an access database where I have added a new field, but I cannot find the name of that field in the Control Source list to link it from where the data will be entered. It IS in the table, too. Why in the world is it not working.
A user enters a New Job Opening into the form for New Job Opening. Later, a user enters a New Interview in the New Interview form.... when they enter the job opening number into the job opening number field, it auto-populates the other information previously entered into the New Job Opening form into an area within the New Interview form. I have made sure the new field is in the table for the New Job Openings table.
I have a query from a colleague for their database.They have a report which lists a name and contact info - at the moment this is set in the report. However noone has the ability to edit the report outside of developer mode (hence why I'm being asked!). This information will change very infrequently but I'd like to set up something within the database so that they can change it as and when needed.
How would be best to do this? It will be the same contact person for every report until roles change. There is a tblNames which contains the necessary information (although phone no. and e-mail are yet to be populated).
I was thinking adding a field to tblNames as Yes/No to state who will be the contact (ensuring they know to only select one person at a time) and using a SELECT...WHERE line in the unbound textboxes - however this returned #Name? in all fields.
I have a user form in Excel that sends data to a table in Access 97.
(Due to restrictions on system).
I will need to pull reports off this table to send via email to Lotus Notes 8.5
Is there a way I can filter the report depending on the data entered in a column?
aka If a cell in a column has "Cheese" I can run a report showing just the "Cheese" results?
I am using a form to filter information so that I can open a report. The report displays information pertaining job costs. Each month the company I work for records their labor, costs, and travel in a form with a year to date amount. Right now, I am having a problem opening up a report for one specific job and a specific month. So what I want the dialogue box to do is to pick from a list of jobs then pick from a list of months, click a button that prompts a preview of the report.
View 14 Replies View Related I have 3 tables.
One is a list of fishermen with all their info. I used a Code as the primary key.
The 2nd is a fish ticket sheet with fish tickets entered and the code in there as a foreign key in the relationship between the two.
I create a report listing the fish tickets and prices perfectly for the 4 fishermen I have entered fish tickets for. (I have 140 fishermen in the main table)
I added a 3rd table for payments made to the fishermen. There are two payments for 2 of the fishermen.
then, I go into report design view and drag in two of the cells from that 3rd table into my report.
The problem is the report then prints JUST the fish tickets and payments for the two fishermen that have payments...not the info for all 4 fishermen. I need to print out settlements for all the fishermen whether they have payments or not?
I have a query that runs - off the back of this, a report. The query will show a name eg dave however the report will show Daves unique key (eg 3) and not just say dave how do I sort this?
View 2 Replies View RelatedI'm trying to add the information from a form and subforms to a report. This would be a medication mar sheet and needs to be in the format of the attached word document. I'm happy to do it in a report and change the formatting if that will work better. The personal info needs to go at the top and the medication needs to be listed on each sheet.
The form is called FrmMarSheet. It basically needs the info from that like the "sample mar sheet.doc". I can only get one medication per page to work at the moment.
I have a main report with one subreport. The main report contains details of a payment being made to a supplier. There is the total amount being paid, and the cheque number being transferred. There is also a field called payref which is made invisible. This is used to link up with the subreport. The amount is the total of several invoices for which payment is being made.
The subreport contains details of each of a number of the invoices being settled. The subreport is linked to the main report via a common field called pay-ref, and the subreport is 'visible'. The subreport prints when placed in the page header section of the main report. However when there is a large number of invoices being shown in the subreport only a certain number appear. It appears that the subreport can only hold a certain number.
When the subreport is put, as it should, in the detail section of the main report, it does not appear at all in the main report. I have no clue why and I have made several reports like this one before.
I have a REPORT containing 7 ('columnar') subreports. Each subreport is to show showing a days worth of medical doses.... to visually represent a wall planner.
When the report loads - user enters a week value # via Inputbox(). This value is written to a TEMP table. Each subreport accesses this same TEMP table to retrieve the week # value. In the Recordsource for each subreport I have the following code :
SELECT * FROM GETPATIENTREADINGS_WEEK WHERE (((Format([DateR],'ww'))=DLookup("WeekVal","[TEMPTABLE]")) AND ((GETPATIENTREADINGS_WEEK.DayVal)=1));
... where the DayVal goes from 1...7 corresponding to the columnar position of each subreport on the display ie. for each day of the week.
The problem I am having is that when the report runs - I see the display showing the data from when the report was previously run. ie. I have to run the report twice to see the data for the correct week value entered. All the SQL works as expected when I run from Query view but when I run through VBA..
On design, layout and report view, everything looks exactly how I want it. However, when I display it in Print Preview mode, checkboxes appear about the Project Name.There's nothing in my report to show that I have these checkboxes on the report. Where these could be coming from and why they only show in the Print Preview layout?
View 2 Replies View RelatedI created a Report from a query. The query shows the correct data that should be on the Report. I created the report to sort by Field A and then sum Fields D, E, & F. None of the query data shows up on the Report. I;m stymied as to why I can see data on a query, but the ONLY data that shows up on the Report is Field A. None of the summations show. All are blank with the box outline.
I've created the report 3x thinking I did something incorrect. Whatever it is, I did it 3x!
I have a subreport with bitmap files attached, the sub works great until I link it to the main report then the sub shows nothing.
View 2 Replies View RelatedOn report, date shows as: 5/23/2015
I want it to show as: 05/23/2015
The input date in main table has the same format as the fields without the '0'.
Property for all date fields appear the same...
Need to track donations in two areas. Have one query that tracks them in location A and one that tracks them in location B. Same query, no other difference. Report made on location A is fine. Made a copy of it and based it on the 2nd query--and I get a pop-up "Enter Parameter Value" for Last Name. The Last Name field is not in the query or anywhere in the report that I can find.
View 3 Replies View Relatedi want to open a report but only showing the result of one record in a sub form,
i have a field that is on all rows of the subform,[click to run] and what i want the user to be able to do is double click on this field and it will open the report with only the record information for that row displayed.
I have an Access 2010 database with a memo field formatted for Rich Text.
I created a simple form. It accepts and shows paragraphs, i.e. I press Return and a new paragraph appears (with a blank line in between paragraphs).
I then created a report based on the same fields. In the memo field it shows the text entered in the form, but not the paragraph breaks. It just shows one big block of text without any paragraph breaks. I have looked for a field property in the report design and layout views that might affect how the text is displayed in the report but I cannot find one.
It is not much use if you can input paragraph breaks in a form but not see them in a report.
I have a main form (Parent) along with a subform(Children). I want to have a button that generates a report with the Parent information as a header and the items in the subform as details. In addition, I want the report to show only the children that were recently added not all of the children.
View 1 Replies View RelatedActually, I don't think i've done this right, but here's the goal I wish to achieve.
I have 2 tables, one containing contract info and another containing client info. I have the 2 related using the client name field. I have a form which is based on the contract table which contains a drop down field of client names. When I select a client, I want it to update a read only client address field within the form, just for display purposes.
Is this easy to do and can anyone point me towards some examples on how to achieve this???
Many thanks.
I have a report that should only show 1 page yet I have 2 and one is blank . I cannot find out why?
View 3 Replies View RelatedHow does one cause certain data to appear in another field based upon the data entered in another field.
For example: I enter in the field the word "Carrot" in a field called food and the word "Orange" appears in the field color. And then if I enter the word "Beans" in the field food then the word "Green" appears in the field color.
Thanks for you help in advance.
Eric
I am entering tax information that requires calculations into a form.
The calculations are visible and perfect on the form but do not appear in the table for printing.
A - should the calculations be created for each field in the report
B - should the calculations be entered into a Form/Query
Hello,
I am creating a database for a user that has a health & safety report form on paper that he would like replicated on screen on a form that he could fill in. Is there a way to do this? If not any ideas of which way to go from here would be much appeciated.
Thanks in advance for any help
Craig