I have a main report with 3 sub reports.The Sub reports have onload events that fill up the text boxes with VBA code. When I open the sub report alone everything works fine. But when I open the main report, the on load of the subreport wont work.
View RepliesI have a report that runs code in Report_load, and based on the value of a field it sets some objects Visible=False and others Visible=True etc..
Now I'm trying to move away from acViewPreview and print direct to the printer with acViewNormal but the Report_Load event doesn't run. Is there a different way to run that code when printing directly?
Hope I explain this clearly -
I have a combo box with four choices. I then have four labels.
If i select A in the combo box i want LabelA to show up, B in combo box Label B (but not Label A) and so on.
I have set the property for all labels to (not) visible.
Then on the combo box I have put
(On Click) event if cmboxx is "A" then
me. label A.visible = true else me.label A.visible = false end if.
This works fine if I am entering a new dataset but when I exit from the database and then go back in, the label is not visible.
I have tried entering the code in the OnLoad event of the form but that doesn't work. Any ideas?
Also - if the combo box also has its selection made before I enter this code then the label is not visible until i go back and re-enter (ie" click) it. Any ideas
I've got a DB, which has 3 forms ( all 'under' 3 navigation buttons/tabs ). The main form ( Client's form ) is set to show first, and currently has a recordsource of about 1350 records. I think the size of the recordsource, and the fact it 'loads' the other two forms all 'in one go', is slowing it down ( between 5 and 10 secs. to load ).
I read I should set the Visible properties of forms, not shown immediately, to false, only setting them to True in the On_Load event - when Tab is selected. Ideal I thought. However, I can't find this property in the Form's property sheet.
Is it possible to load the data in input from by double clicking on data from list box ?
I have single form on which both input form and read-only form is present. as i used visible property to display or not accordingly.
User enters the data from input form. (It has been done)
User go onto read only form where combo box and list box. from drop down values load into list-box. (It has been done)
Now double click on any record then it should re-directed on input form with loading the data in editable mode for updation purpose. ???? (How this step will be done) ?
I would like to have a birthday remainder on access form load event VBA...
I have tblEmp with 2 fields,
Name DOB
A 22/04/1977
B 25/03/1965
C 17/08/1985
I would like to compare Date and month with my system date to show in the message box "Mr. A Birthday Today" on the Form load event...
I have a form (Pipeline) with an on load event that automatically directs the user to a new empty record.
Code:
Private Sub Form_Load()
DoCmd.GoToRecord , , acNewRec
End Sub
Now my problem is that I am trying to design a 'search form' that will allow the user to look up a specific record in the main form by pressing a command button. Creating the search form is easy enough. I cannot figure out how to override the on load event in the main form when pressing the command button.
As it is right now, the button opens the form and then go directly to a new record.
I'm developing in Access 2007 and created a runtime version.
When the user clicks the X to close the runtime application, the main form's Load event fires. Any clues as to why this might be? Some of the code is based on other forms that do close, so of course errors start flying. Note, this is only in the runtime version; the accdb file works just fine.
My current workaround is to put the offending code into the forms On Current event, which I'm able to do in this context.
Is it wrong to think that a forms On_Load event shouldn't be firing when the application is closing?
I have a Report containing a sub-report which holds the pictures. Typically there are 3-4 pictures per A4 page and 2-3 pages, so not millions, but for some reason whenever I load I get between 1-3 pictures a page and the rest show as blank. I can repeatedly reload time after time and get a seemingly random number of successful images.
The original images are on a network drive (but connectivity is good). They are high quality images but the load time isn't that bad (Is there a 'normal' load time for these things?) I wonder if it's just timing out after the first X pictures..
So I am adding a chart (on a subreport) to a report that has multiple subreports already. I have gotten the chart to show up correctly on the report, but now 2 of my other subreports are not working. I am being prompted to input parameters for these subreports that used to pull their parameters (between dates) from the main report.
I read somewhere that charts master/child linking doesn't work but I'm not sure if that applies to subreports with charts on them, or just charts in general. I've tried changing the query on the chart subreport a little without luck. Is this likely some glitch thing? Should I keep trying to alter the query or maybe there is some other work around option?
I have a report with several subreports. I need to total the subreports onto the main report. How do I refer to the control on the subreport?I know that with a form / subform I would use: Me!Subform1.Form!Controlname.But simply replacing 'Form' with 'Report' doesn't seem to work.
View 1 Replies View RelatedI have a main report with several subreports. Some subreports have other nested subreports. all of the reports and subreports are based on queries. when a query returns no values, i would still like for the reports and subreports to display in print preview. (currently, they display in report view but not in print preview.)
I tried a few things:
1) I set all report section can shrink options to "No" - (this did not work)
2) I set the can shrink options for all textbox controls, within each report section , to "No" - (this did not work)
3) I moved all controls from the details section of the subreport to the report header section - (when I did this, I got the subreport to show in print preview when the query for a single subreport returns no values but when i have a subreport with nested subreports that have no value, none of them show up in print preview)
I've searched...moving the controls from the details to the report header was the best thing i could find, but again, this only works with a single subreport and not with multiple nested subreports.
I would like to create a report based on a query. The first part is simple enough. However within this query I have a 'Count field' (a total of the number of duplicated this record has appeared in the table). And would like to create a subreport (if possible) based on that value for example. if count > 1 then show subreport.
My question therefore; is the above possible? How would I go about linking this logic with the subreport
In Access 2010 I am previewing a customer report. I also try to give users the choice of seeing history sub records for any given customer. I have a selection dropdown box where they can chose ALL, 5, 10 or 15 in a report. To this end I set the record source in the "Open" event for the subreport. if I want all records it works fine, but as soon as I put in "SELECT TOP 5" the subreport goes invisible. I have tested the query directly and it works fine. I'm sure this worked in Access 2007
View 3 Replies View RelatedI have a report with 2 subreports on it. One of the subreports does not show on the report preview unless I set a breakpoint in the report's code. Set a breakpoint in the code (for no other reason), hit the breakpoint, continue, and the report works fine from then on, until you close the database and open it again, even if you remove the breakpoint. The other subreport, which is similar, always shows fine.
I can't find out what's wrong by setting a breakpoint.
I have a report that calls a subreport. In most instances, the subreport will have no data and I won't want to show the subreport. I've tried various ways to deal with this:
1) Make the subreport property on the main report the minimum height and set CanGrow = Yes
2) Use the Report_NoData event on the subreport and add the code 'Cancel = 1'
3) Make all the fields on the subreport the minimum height and set CanGrow = Yes
None of these seem to work. I don't have any headings on the subreport, so the only price I'm paying is adding a gap onto the main report the size of one detail line of the subreport. Still, it leaves the report lacking professional quality.
I have a main report with one subreport. The main report contains details of a payment being made to a supplier. There is the total amount being paid, and the cheque number being transferred. There is also a field called payref which is made invisible. This is used to link up with the subreport. The amount is the total of several invoices for which payment is being made.
The subreport contains details of each of a number of the invoices being settled. The subreport is linked to the main report via a common field called pay-ref, and the subreport is 'visible'. The subreport prints when placed in the page header section of the main report. However when there is a large number of invoices being shown in the subreport only a certain number appear. It appears that the subreport can only hold a certain number.
When the subreport is put, as it should, in the detail section of the main report, it does not appear at all in the main report. I have no clue why and I have made several reports like this one before.
I have a report with four subreports. If the subreports have no data I have a formula to put the word 'none' in the first field as follows:
=IIf(IsNull([Question]),"None",[Question])
I do a print preview and the word 'None' shows up and subreport looks good when I view just the subreport as well as when I view the full report.
When I print the subreport the text '#Error' prints. When I print the full report I just get a blank space.
I need the subreport to print with the word 'None' if there is not data. How do I accomplish? I tried the above formula both in the query and in the control source of the report. It just comes up blank when I put it in the query.
I need to add a DLookup to my Subreport.
For my text box, Text255, on the Subreport I have tried:
Code:
Private Sub Report_Load()
Me.Text255 = DLookup("[Along_line_spacing_%pass]", "Performance_Requirements_Defaults_Table")
The table Performance_Requirements_Defaults_Table has just one record for lookup. No value is returned when I run the main report.
I found this: [URL] .....
And tried adding the lookup code to the main report instead of the Subreport, but I think I am having trouble understanding what they mean here: "Subform1 is the name of the subform CONTROL on mainform" Are they inferring that I need to have a text box on the mainform as well?
I tried using this Me!Subform1.Form!ControlName like this:
Code:
Me.Text255.QC_Along_Line_Processing_Subreport!Text255 = DLookup("[Along_line_spacing_%pass]", "Performance_Requirements_Defaults_Table")
I know this is not correct, and I have tried several variations, but I am totally stumped. Everything I have tried with the lookup code in the main report returns "Member Not Found" and Text255 is highlighted. I feel like this should not be such a big problem.
linking a report and a subreport (chart). I have uploaded my sample DB. I'm trying to chart all the individuals and three fields for each Home. Both report and subreport are using the same query for the record source. My charts are blank "All_Homes_Individual_Totals". Just use date range 05/01/14, 06/24/14 on my Main form page for the data.
My second question is how would you create a chart to pull by each individual with their monthly totals per Home using "qry_Community_ Inclusion_ All_Homes" with a report and subreport (chart) as above. Report would show the individual's totals by month for each home.
Access 2007
Windows 7
Trying to get a subreport total to show on my main report
getting #error no matter how I code
Running a subreport containing a total in report footer (only field that
name of subrpt total fld subrpt
[SubRptExp].[Report]![gramtrcvd]
I have some fields in form that most of the time have data in them. Now comes that when there is no data, there should be one different field filled in with "None."
The client could have 3 types of products, but when he does have none, the "None." should appear. Another catch is that I have the titles for the products on a textbox above the products. Is it possible to have them not appear in the report if the client has no products?
I guess that it could work like in excel with an IF statment. If no values found, then keep those text boxes from appearing on the report and put a text with "None."
I am using Access 2003. Is there any way to put grid lines among fieldnames and contents just like in Excel in the output of subreport?
View 1 Replies View RelatedI am trying to get my totals from my subreports, and dividing the number by 2 or 4, and put the new number on the main report.
for Operator/Trainer Productivity, I used:
=([rptEmployEvaluationOperator subreport].[Report]![OPTotal]+[rptEmployEvaluationOperatorTrainer subreport].[Report]![OPTotal])/2
for Auditor/Trainer Productivity, I used:
=([rptEmployEvaluationAuditor1 subreport].[Report]![OPTotal]+[EmployEvaluationAuditor2 subreport].[Report]![OPTotal]+[EmployEvaluationAuditor3 subreport].[Report]![OPTotal]+[EmployEvaluationAuditorTrainer subreport].[Report]![OPTotal])/4
These both work if there are values in all totals subreports. When one of them might not have a total, I get an error message.
I tried to use :
=IIf([Orders].[Report].[HasData], [Orders].[Report].[txtOrderValue], 0)
=IIf([Orders].[Report].[HasData], Nz([Orders].[Report].[txtOrderValue], 0), 0)
=iif([rptEmployEvaluationOperator subreport].[Report].[HasData],([rptEmployEvaluationOperator subreport].[Report].[OPTotal]+=iif([rptEmployEvaluationOperatorTrainer subreport].[Report].[HasData],[rptEmployEvaluationOperatorTrainer subreport].[Report].[OPTotal])/2
and the same idea for the second one. I tried both methods and did not work. I am not sure what I am missing.
I am trying to send the current record and the current subform record to Reports for printing.Each record on the Form can have multiple records in the subform, however I only want to print the Main Form and the Current subform.Form / subform are linked on EquipID and EquipIDfk and are working correctly.Report / subreport are linked the same way and work correctly.When I try to use the DoCmd.OpenReport... It is printing the data from the main form plus all subform records related to the main record.I have tried the following Sub to filter the subreport without success.
Private Sub cmdPrintRecord_Click()
Dim strWhere As String
Dim strLook1 As String
Dim strLook2 As String
strLook1 = Me![EquipID]
strLook2 = Me![subfrmInspectionReport].Form![InspectionFindingspk]
[code]...
Using Debug strLook1 and strLook2 both show they have the correct relevant record numbers and the value stored in strWhere is: [EquipID] = 745 And Reports![RptPrintRecord]![subrptInspectionReport].Report![InspectionFindingspk] = 8. This only prints an empty report. It seems that when I try to reference the subreport it goes pear shaped.
I have a subreport with bitmap files attached, the sub works great until I link it to the main report then the sub shows nothing.
View 2 Replies View Related