I have a Table with Emp_ID and Details of my Employees. I have created a query and set parameter [Enter Emp_ID]. When I pull up a report, I get a pop-up and it asks me for the Emp_ID. When I input same, I get the information I need. Everything is good so far...
My Question... I have designed a report when user will need to enter Emp_ID and click on a button and they will get the report "EMPReport" without having the pop-up window asking for EmpID.
I have been using the below code but I get the pop-up again and I need to enter the Emp_ID again to view the report
See below Code:
Code:
Private Sub Image11_Click()
If IsNull(Me.Emp_ID) Or Me.Emp_ID = "" Then
MsgBox "You must enter an Emp ID.", vbOKOnly, "Required Data"
Me.Emp_ID.SetFocus
Exit Sub
End If
DoCmd.OpenReport "Rpt_HR1", acViewPreview, , "[Emp_ID]= " & "" & Me!Emp_ID & ""
End Sub
i want to open a report but only showing the result of one record in a sub form,
i have a field that is on all rows of the subform,[click to run] and what i want the user to be able to do is double click on this field and it will open the report with only the record information for that row displayed.
I'm trying to use a command button in a form to filter and open a report. I am able to get it to open the report, but I cannot get it to filter the report based on a combobox in the form. I've tried every combination of code I could think of and find. Here is what I currently have:
Code: Private Sub FilterReport_Click() DoCmd.OpenReport "Report", acViewReport, "First Name='" & Me.FName & "'" End Sub
Code: Option Compare Database Private Sub Report_Open(Cancel As Integer) Me.RecordSource = Me.FName End Sub
"FilterReport" = Form Button "Report" = Report "First Name" = Report Field "FName" = Form Combo Box
I need to split out information in a report and I'm not sure how to do it.
The report is based on the following query:
Code: SELECT tblHazardClass.HazardClass, Product.ProductName, Product.Package, Product.Size, tblStoreProducts.Cases, Product.Units, Product.ReportUnits, tblStoreInformation.StoreName, (([tblStoreProducts].[MaxUnits]*[Product].[Size])/[Product].[ConversionRate]) AS QOH, tblStoreProducts.StoreKey FROM tblStoreInformation INNER JOIN (tblHazardClass INNER JOIN (Product INNER JOIN tblStoreProducts ON Product.UPC = tblStoreProducts.UPC) ON tblHazardClass.HazardKey = Product.HazardKey) ON tblStoreInformation.StoreKey = tblStoreProducts.StoreKey WHERE (((tblHazardClass.HazardClass)<>"NON-HAZARDOUS")) ORDER BY tblHazardClass.HazardClass;
My issue is that the products can have a PhysicalState of 'L' (liquid), 'S' (solid) or 'G' (gas). As of right now, only one of the HazardClass entries has multiple physical states (L or S).
My report details each product in the hazard class and totals the amount of that hazard class. Obviously, one cannot add gallons to pounds and come up with an answer that has any meaning whatsoever. How to have the report total the S and the L within a hazard class separately.
Do I do this within the query, or within the report itself? I've already considered making 2 separate Hazard Classes for the one in question (Corrosive). However, since these Hazard Classes are official classifications per the International Fire Code, that's not really an option.
I am trying to get some totals on a report, but the totals are from a table that the form is not related to as such.I am trying to get a textbox to show how many records in a query match the given criteria and show me the number of records that match. I was thinking DCount, but not sure if it will work?
I have a query called 'VehiclesAllocatedToday' which is already filtering records to show only those allocated today. On a report that shows Unfit Vehicle (and is related to a different query), I would like a text box that shows me how many records there are where the text "Type One" is in the TypeRequired field.
I have a report based on a query that has data for many dates. At the moment I have put a specific date in the criteria of the query so that I could build the report format. So it now displays all the data for the date i have in the criteria section. I will need to run this report several times per week so the specified date (and corresponding data in the report) will need to be changed to a new date when I open the report i.e. when I open my report I want to show data in the report only for a specified date.
Can I create a date parameter box open up when I open the report? Can I create a form with a button that when I click will open the report displaying data for that date? What would be the best way?I also need to display the specified date on the report.
I have a popup form that prompts for a value and has a button defined with an OnClick,OpenReport with a WHERE clause. The value the user enters is placed in the WHERE clause.
The report is generated using a Query and the WHERE clause. I was very surprised -- it works!
Now I'd like to add a chart to the report that represents the information on the report. How can I do this without calling the query again? Can I somehow reference the information that's in the report?
I have a question related with a report i`m using to print labels. I am not familiar with Access and this is quite a challenge to do it alone.
In the attached file there is a report called "MICRA", when started it asks that you want to select (default is 1 and special select in this case is 11) and next it asks "SPS", the value entered there is printed in the bottom right corner of the report.
My question is is it possible if in the SPS field is entered a special value (for example "MASS") to print 30 labels of each selected label with text in this fiels = "val.1"; 15 with text in the field = "val.2"; 10 with "val.3" and 10 with "val.4" and after that to print next label with same rules...
And if not entered "MASS" to print just 4 copies of every label.
I have a question about summing information on a report. I am developing a report to see have percentage of time Staff work within a certain area. On the data base the time percentages entered as ranges e.g. 75-100%, or 11-25%. We needed to figure out the total percentage of time so I created a report to add the total time. I used a text box which it titled FTE_Total if embedded iif functions to display the total time. Here is the function I used:
This worked perfectly however I cannot get the FTE_Total fields to sum. I tried the following function in the group footer: =Sum([FTE_Total]) but everytime I try to look at the report in report view I get a message asking for the FTE_Total Parameter.
In my report I have a field called "Packages" and my subreport consists of a table, one of the columns is "Packages" so I want to use the value that I have in "Packages" to filter for only those items in the sub report.
I am in the process of (attempting) to develop a database and application for Parking & Violation Management. I have two tables at this point: "Parking Registration" and "Violations" that are linked by a "Permit #". I have developed a form that will allow the officer to enter either the "Permit" or the "Licence Plate" of a vehicle to run a "Vehicle Check" query to produce specific information for the vehicle in question; which is what I wanted, kind of... The problem is that the resulting data pops up in "table" format, and contains multiple fields, making review of the data difficult due to its lengthy, linear nature. Is there a way to have those results appear in text boxes either on a separate form or the "Vehicle Check" form itself?
I have a form with payment information and need a list, what date the payments are due. These can be only 2 or 3 payments up to maybe 24 payments. The result I want is something like this:
Date Amount Total paid 1.7. 500.00 500.00 1.8. 500.00 1,000.00
The list itself is not a problem, but I need a list who only shows the number of payments as agreed, 2 lines (with paydates) if 2, 12 if 12 payments. I have the information of the total amount, the number of installments and the first payment date.
I have one table with some info about my clients, I have a form, where I must choose this clients from combobox and then after clicking button Print must open report with info about specific (chosen from combobox) client and some another texts that doesn't change. Final result must be printed report as invoice.
I can't create report with only specific record information.
I have a continuous form that displays a list of invoices (frmInvoiceList) based on an adjustable filter contained within the form. I have the filters working the way that I want them through VBa and I have a button on each record to open a report (rptInvoice). Inside that report, I have some controls to "print", "email", and "export to PDF". Again all that works just the way I want. The Form and the Report are based on a different query and each has an InvoiceID field to link.
What I am trying to do is put the Print, Email, and Export buttons on the main form which would perform the appropriate action for all the records that are displayed on the form. I've been able to get the Print function to work to a degree. It will print all the records, but it changes the background colors based on the alternating records. When I go to Email or Export, it creates a single file with multiple pages and each page is a new record, again with the alternating background colors.
Ideally, I would like to have a separate file exported for each record that can be renamed and archived separately. I'm not so concerned with the email function but if it would be possible to generate a separate report for each invoice, then pull the appropriate email address for the record, that would be really nice.
I've tried some "for" and "do" loops that I found through some Googling but none of the samples ended up working like I wanted.
I have a patient information database which uses a filtered form to show records for only one patient at a time. All the records in the database are linked together using one number, the patient's unique identifier.
I have designed a report which draws information from separate tables and generates a complete summary of information. This report depends on having the ID number of the patient to generate the report.
Originally, I had envisioned having a command button on the data entry form, which would then automatically take the ID number from the form, and generate the report. Though good in theory, it never worked out in practice, as I could never figure out how to make it happen.
Is there a way to design a macro or some other thing that would take the ID number from the field on the form, and use it to generate the report? Currently, I have it configured to prompt me for the ID number. When I enter it manually, the report is generated perfectly.
I have a report that is a summary of multiple records in it. What I have next to the record on the report is a button.I have report that are labeled:
rptIncident Summary rptIncident Report and a button labeled "open report"
I would like to click on the button and then it open the rptIncident Report with all the information, not just the summary. I will put a picture so you know what I am trying to accomplish.Is this a simple Onclick event with a where condition or what? Or does this go beyond to having something to do with VBA?
When I open the report on XP/Access 2007, it works just fine.
When I open the exact same accdb with a Win7/A2007 machine, the report does not open. If I debug and display the error, a msgbox appears "The OpenReport action was canceled."
I have other bound reports and those open with XP/A2007 or Win7/A2007 just fine.
It makes me VERY nervous that the same exact ACCDB in A2007 runs differently on different OSs (XP vs Win7).
I'm working on a database that produces employee contracts. To make it look as professional as possible I hide the Access main window when the splash screen loads using the ShowWindow function. The various forms to check and enter details all pop up without any problem, but when I get to the last stage where I use a report to produce the contract and then open it in PrintPreview mode, it won't display (unless I show the main window again , which looks very untidy!). Is it actually possible to display a report with the main Access window hidden?
I am in the process of making some changes to an inherited database. One of the things I need to do is to fix an issue with the reports. The reports have a field which asks for the data range (from xx/xx/xx to xx/xx/xx) as soon as the report is opened, but then the query that fills that report also asks for the same data range so you end up entering it twice.
What do I need to do to enter the data range only once and have it show up on the report and also be used on the query?
This im sure is an easyone to most of you but for me I cant find away around my problem!!
I have a form I use to enter infomation and I have also made a report that I am trying to get the infomation from the form onto the report.
I would like to have a command button on the form that once I click it, it then prints out the report. How do I get the information from a form to a report as when I have tried doing this myself it only allows me to use information from a query or table.
The database I have created is to produce product description sheets. From the switchboard, the user clicks a button that opens a form on which they can enter about 5 bits of information , then select the product they wish to produce the product sheet for and when they click a button, the product sheet is produced. The product sheet is a report with a subreport. The information entered on the form is included with more information from the database on the main report and the subreport is based on a union query which combines information from 2 tables to list the items included in this product. (the information the user inputs into the form is information that changes depending on the situation and is not stored in the database.
Now comes the next step in this process. Just as the information input into the form is temporary information, there is also one bit of information that needs to be input on a temporary bases for the items that are listed on the subreport. Each of the items on this subreport needs an assignment of AAA or BBB that needs to appear in the subreport on the line with that particular item. There can be one item in an product, or there can be many and the listing of AAA or BBB can be different from one item to the next or they could all be the same. The assignment needs to be made on an item basis.
My thoughts on this were to have a subform appear once the user selects the product on the form which would list all of the items and allow them to select either AAA or BBB in a column on this form. Then when the click to open the report, those assignments would carry through to the report.I have been able to create a continuous form displaying all of the items based on the union query but that's as far as I can get. Not even sure if that is the way to go.
Is there a way to reference the AAA and BBB input on the subform I described so that it displays in the report.
I have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.
1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)
2. If user presses the Print button before pressing Save button then system should prompt user.
Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):
Private bSaveClicked As Boolean Private Sub Form_BeforeUpdate(Cancel As Integer) If Not bSaveClicked Then MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation Cancel = True
I was wondering if any of you would be able to help me out. I'm trying to get a button on an access form to open crystal reports and pass two parameters through to it from controls on the access form.
This is what I have at them moment: Private Sub openRpt_Click()
Dim selForm As String Dim CrystalReport1 As Crystal.crystalReport Set CrystalReport1 = CreateObject("crystal.crystalreport")
CrystalReport1.Connect = "ODBC;UID=ID;PWD=PW;DSN=dsn;Database=dbname" CrystalReport1.ReportFileName = "O:DatabasesCReportsSingle Project Up To Burn Rate.rpt" 'CrystalReport1.WindowTitle = "Single Project Up To Burn Rate" 'CrystalReport1.WindowMaxButton = False 'CrystalReport1.WindowMinButton = False 'CrystalReport1.WindowState = crptMaximized
