Reports :: Opening Report Via Parameter - Enter Your Box ID

Mar 11, 2015

So I have a report that opens via Parameter. The SQL behind the query that runs the report is (I took out alot of lines that aren't necessary to answer the question)

PARAMETERS [Enter Your Box Id] Short;
SELECT DocumentsTable.OrganizationalID,
.
.
.
DocumentsTable.Status
FROM DepartmentsTable INNER JOIN (Year1 INNER JOIN DocumentsTable ON Year1.ID = DocumentsTable.RecordDateYearID) ON DepartmentsTable.ID = DocumentsTable.DepartmentID
WHERE (((DocumentsTable.Voided)<>'Y' Or (DocumentsTable.Voided) Is Null) AND ((DocumentsTable.ID)=[Enter Your Box ID]));

So if I click on the report, I get a little popup that says "Enter Your Box ID", and when I do, the report works just as expected.

However, I also want to be able to open this report via link from another report, and pass the Box ID #. I just can't get the syntax right. I would have thought it was this:

Private Sub ID_Click()
DoCmd.OpenReport "Find A Box", acViewReport, , "[Enter Your Box Id]=" & Me.ID
End Sub

However when that execute, I still get the pop up asking for "Enter Your Box ID"

View Replies


ADVERTISEMENT

Reports :: Copy Of Report Showing Enter Parameter Value

Aug 15, 2014

Need to track donations in two areas. Have one query that tracks them in location A and one that tracks them in location B. Same query, no other difference. Report made on location A is fine. Made a copy of it and based it on the 2nd query--and I get a pop-up "Enter Parameter Value" for Last Name. The Last Name field is not in the query or anywhere in the report that I can find.

View 3 Replies View Related

Reports :: Referencing Text Boxes In A Report And Getting Enter Parameter Value

Dec 31, 2013

I have a report and within the report I have added some text boxes with some simple logic such as sum, count, etc. These text boxes function well as long as the logic is referencing existing fields. The minute I try to have a text box reference another text box I get the "Enter Parameter Value" box pop up. I don't understand this as the text box I am referencing has a vaule based on what it is referencing.

Example: 1st text box control source =Sum([existingfield]) I get a value.
2nd text box control source =[existingfield2]/[1st text box] I get "Enter Parameter Value" of 1st text box.

View 11 Replies View Related

Reports :: Enter Parameter Value

Jan 15, 2015

I am trying to create a report, filtered on a combo box(txtname).This combo box is having a list of names.I have one query(mainquery) based on a single table(maintbl).I created a blank form(GenerateReport) with abovementioned combo box(txtname) and a simple button, which will open a simple report.In mainquery, under names column i am defining the criteria:

[Forms]![GenerateReport]![txtname]

Report is being filtered accurately.But when I open query i receive error 'Enter parameter Value'

View 8 Replies View Related

Reports :: Enter Parameter Value Again

Oct 20, 2014

I have a command button that opens a report.In one of my reports, this macro works:

Code:
="[eEmployeeID]=" & [eEmployeeID]

However, in another command button that should open another report, the code below does not seem to work:

Code:
="[echEmployeeID]=" & [eEmployeeID]

It just keeps giving me errors saying that there's a mismatch, etc. The field in my report that holds Employee ID is named echEmployeeID. If I write this code:

Code:
="[echEmployeeID]=" & "[eEmployeeID]"

it sort of works, but Access asks me to enter parameter value first before executing the where condition. I already tried to change [echEmployeeID] to [eEmployeeID] both in the source table, and the report but it just doesn't work.

View 3 Replies View Related

Reports :: How To Change Enter Parameter Value To Option In MS Access

Jun 2, 2014

I have Access database I want to change enter parameter value to option when I want to view a report.

View 4 Replies View Related

Modules & VBA :: Open Report Criteria - Enter Parameter Value

Aug 5, 2013

I have one form which have two multiselect listboxes. They work, but every time when I choose id_organizacija from listbox popup enter parameter value comes up.

I am already tried to put id_organizacija in [ ] but that didnt solve problem.

Code:
Set ctl = Me.lstEmployees
For Each varItem In ctl.ItemsSelected
strWhere = strWhere & ctl.ItemData(varItem) & ","
Next varItem
Set ctl = Me.lstOrganizacija

[Code] ....

View 12 Replies View Related

Reports :: Possible To Enter Text On A Report Like A Form?

Aug 23, 2013

I have an exceptions report that i would like the user viewing it to write some form of justification on why the data if falling out. Is it possible to create a text box where the user could actually type text on the report before printing it?

View 2 Replies View Related

Reports :: Allow User To Enter Dates On A Report

Feb 26, 2014

I would like my user to be able to enter dates on a report.

I have entered unbound fields on the report; but it doesn't keep any of the information (dates) for printing or otherwise. (I don't need to save these dates since they change monthly.)

View 1 Replies View Related

Reports :: Between Parameter On Report?

Jun 5, 2013

I have a report based on a query with a between two dates parameter (Begin date and end date). This parameter is fed from a form. All works well - query, form and report. My question is can the date parameter appear on the report header so users know the report was based on a start date of 1/1/2008 and an end date of 1//2009 for example?

View 4 Replies View Related

Reports :: Where Condition When Opening A Report With A Button

Oct 22, 2014

Basically when I click a button on a form I want it to run a report but only when certain criteria are met as entered in the 'Where Condition' box. I've managed to do this successfully when it is an equal to query but I now want to run a 'contains' query and don't really know where to start.

I have a text box on the form labelled [Desc] and I want the report to pull records where any text entered in the [Desc] text box is contained in the fields [Used Stock]![Model]

View 3 Replies View Related

Reports :: When Opening Report It Prompts For Input

May 29, 2015

I have a database with loads of different sales data from Jan 2014 with other product details as well. I also have a form where the user can input any of these data (this is based on a query):

- Campaign name
- Exact Date
- Month
- Year
- Category
- Campaign Type

This should run the query, then open a report that's grouped by:

1. Year
2. Month
3. Exact Date
4. Dem name

Even if the user inputs the month and year on the form, when reopening the report, it prompts for inputting the year and month as well, but nothing else.

View 3 Replies View Related

Reports :: Drop Down Boxes Before Opening Report?

May 16, 2014

I've made a query and designed a report for it. Simply it includes:

Area code, customer name, other customer details.

I want other people, when they click on the report to be given a drop down box which allows them to choose a specific area code before it generate the report. So, for example, they just want to look at Yorkshire region records, they choose Yorkshire from the drop down box and it'll generate the Yorkshire report. I've searched around but can't find what these are called.

View 3 Replies View Related

Reports :: Save Report With Name From Parameter Value?

Mar 28, 2014

Background: Access 2003

I have a database with which I use to generate reports as pdfs to load to a website.

However when I go to save the file as a pdf it is always as the report name.I am trying to automate this by using a macro as I need to run a report 50 times for ships with a different parameter each time (name of the ship) Another report needs to be run about 30 times, this time the parameter being a date And finally two other reports, but I can live with those being the name of the reports.

Firstly can this be done?

Secondly which would be the best way?

I've tried using the macro route by I run my Report "Main_Ship" with a where clause of [ship]="wiltshire". This produces the report with the relevant ship, but I am then unsure what to use next to save it as a pdf with the name "wiltshire" using the macro route.

or

Create a VBA routine that runs the report as many times as required each with a different parameter for the name of ship or date.?

[URL]

View 6 Replies View Related

Reports :: Opening Report In Full Window Mode?

Jan 14, 2014

i have a button opening forms however when they open they appear in window mode and not full screen. is there an option or a line of code of code i am over looking to make it open in full screen mode?

ps. i am using access 2010

View 4 Replies View Related

Reports :: Opening A Report Based On Combobox Selection

Sep 24, 2013

I am trying to run a report based on a combobox selection. I have three different reports, each for the three different items in the combo box. I just don't know how to code it so when I run the report, it picks up the name in the combo box and opens the correct report. This is what my code looks like for the button that will run the report:

Private Sub Command7_Click()
DoCmd.OpenReport ("Signers Authorized for Check Writing"), acViewPreview, , WhereCondition = [BTrans] = "Check Writing"
DoCmd.OpenReport ("Signers Authorized for Stop Payment"), acViewPreview, , WhereCondition = [BTrans] = "Stop Payments"
DoCmd.OpenReport ("Signers Authorized for Wires"), acViewPreview, , WhereCondition = [BTrans] = "Wires"
End Sub

The problem is, that as soon as I hit the Run Report button, all three reports open up, so it is not reading what is in the combo box. The quotes, "Check Writing" , "Stop Payments" and "Wires" are the actual selections in the combobox and [BTrans] is the name of the combobox.

View 4 Replies View Related

Reports :: Pass Parameter To Report On Load

Apr 16, 2014

I have a report that pulls data from a crosstab query. The report works perfectly and prompts for a "StartDate" when it is run.I need a form with a date field that can be selected. Then a command button which when pressed opens the report with the selected date passed as the parameter.the code I have so far is in the on click event of the button:

DoCmd.OpenReport "rpt_12MonthlyInvoices", acViewPreview, , "StartDate=" & Me.txtStartDate

I was hoping that this would pass the txt.startDate field on the form to the report's "StartDate" when it is opened, but it is still prompting for the parameter when the report loads.Should I be using openArgs rather than the where clause? Or do I need to configure something in the "on load" event of the report also?

View 1 Replies View Related

Reports :: Pass Parameter Values To Report Fields?

Apr 18, 2013

I have a report that is based on a query.

The query has two fields. Start and End Dates.

When I run the query the Parameter box asks for the dates by using <[Date1] and >[Date2]

What I want is to have 2 fields at the top of the report, that display the values I enter in these boxes?

View 1 Replies View Related

Reports :: Print Report Based On Input Parameter

Jul 2, 2015

I have to print a label quickly every time that the product hit the warehouse. The label has been created as a report linked to the query that will provide the info to the report. In order to make this report printing as quick as possible the idea is to scan the sample id from the product and once the label is printed scan the next sample and an on.

I'm not an expert on VBA but I have created the following scrip but the reports doesn't pop up.

Here is the code:

Dim SampleID As String
SampleID = InputBox("Enter Sample ID")
If SampleID > 0 Then
DoCmd.OpenReport "rptGRM_QuickPrintLabelDymo", acViewPreview, , "[Sample]=" & SampleID
Else
DoCmd.Close
End If
End Sub

View 8 Replies View Related

Reports :: Opening Form Based Off Of Double Click Event On Report

Aug 15, 2013

I have a main Form "Client" that shows details such as Representatives, phone numbers, status, etc. I also have a main report "CRM" that is a nicer summarized table version of all of my Client form entries.

The "CRM" form will be used by others in my office to see what clients we are contacting, etc. What I want to be able to do is have someone open the CRM form first. If they want to see even more specific info (not everything is included in the report, as that would be too messy), I want them to be able to double click the Client's name on the report and be taking to the corresponding entry on the Client form that shows more details.

Right now my code for the Report which is not working is the following:

Private Sub Client_Name_DblClick()'double click on a client name in the reportDoCmd.OpenForm "Client", acNormal, , "[Client_Name]='" & [Client_Name]'this should open the Client Form to the record of the same client that was double clicked on the reportEnd Sub

View 14 Replies View Related

Reports :: Hyperlink Event - Opening Report To Print Preview Mode

Aug 7, 2014

I have a report which is accessed via a hyperlink in a form. I have the default view for the report set to Print Preview yet everytime I click the link the report opens in report view which I don't want.

The event for the hyperlink is as follows:

Private Sub cmdPrint_Click()
Dim strWhere As String
If Me.Dirty Then 'Save any edits.
Me.Dirty = False
End If

[Code] .....

I have tried changing "acViewPreview" to "acViewReport" and "acViewNormal" and each time it is either going straight to print or opening in report view. I just want the report to open in print preview mode so I can decide if to print a hard copy or send to pdf.

View 10 Replies View Related

Reports :: Produce A Report By Inputting Parameter Into Text Box On A Form

May 24, 2013

I am very new to access, any way that I can have a popup box appear when I ask to produce a report and I can type in a parameter of my choice and it will produce a report based around that parameter?

I have a table that is directly linked to an excel spread sheet that is updated each week external to the database. I have to produce reports on the data contained in that table.

I have already produced reports that look for specific number and those reports are produced automatically.

I was wondering if there was some way I could open a form and type a number into a text box and it would produce a report around that number. e.g. "list all engines below X margin" and I can type any number in representing X and a report would be produced.

View 9 Replies View Related

Enter Parameter Value

Jun 8, 2005

I have a form and it is related with a query and by clicking ok I got the required results in Access 97. But now I have converted to Access 2002 and whenever i enter values in the form and click ok I get a Dialog Box "Enter Dialog Box". I read MKB article but it did not help me at all. Please help me out I am not getting any idea at all to solve this problem?

View 6 Replies View Related

Enter Parameter Value

Jun 1, 2007

I have searched other threads and cannot find one that helps solve my problem. So, I hope someone can help.

I have a query which runs ok until it is filtered. I have tried using criteria to filter the info I need but this returns an 'Enter Parameter Value' message. Running the query without using criteria works okay but using a filter in the report itself returns a 'Data Mismatch' message.

The report filters fine on fields until it gets to one that has been changed from text to number. It also includes an Nz formula. The formula in the is field is: CLng(Nz([order_no],0)). Other fields related to this also appear to be affected.

I need the CLng formula as the field is needed to calculate other fields using a zero instead of a null which would otherwise cause an error. I was given the formula on this forum yesterday, (thanks Bob Larson and AlanJ10), which was great in solving the other issue but is this is what is affecting filtering, (ie. a confusion between text and number?!?!) I have also tried converting the result of the calculation I want to filter back into text using CStr but this does not make any difference.

I have checked the field names and also renamed fields that were 'Expr' (as in default names for calculated fields), and cannot see any problems.


Thanks

View 5 Replies View Related

Enter Parameter Value (need Help)

Sep 29, 2007

I have a query and one of the fields/headings i have it create is a "cost" total where it does a dlookup from a defaults table.

I then have a "listprice" which is antoher field in the querry of which the data table sits.

I want to take the [listprice] and minus the [cost] without re-creating the dlookup function...

I need this to help with an APR calulction using the RATE function which if i have it do all the dlookups it says I have exceeded the limitiation and will be trumcated. So if i use the name [cost] it works but i have to hit enter because it says "Enter Parameter Value".

Any ideas how to get around this?

Thank you.

View 1 Replies View Related

Enter Parameter Value

Jan 26, 2008

I have the following query that gives me this halt. If I enter without responding to it it opens in Datasheet view as intended. It wants me to enter Query2.EmpID. This is my SQL statement.

SELECT qryPolicyByDriverName.CWSPolicy, qryPolicyByDriverName.EmpID, qryPolicyByDriverName.DriverName
FROM tblTrainingPoliciesNotCoveredDrivers INNER JOIN qryPolicyByDriverName ON tblTrainingPoliciesNotCoveredDrivers.CWSPolicy = qryPolicyByDriverName.CWSPolicy;

I don't know why this is happening. Thanks for looking at my problem.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved