Reports :: Page Breaking Between Records In A Subreport
Nov 13, 2013
I have a report in which there is a subreport that prints towards the bottom of the page. I know that I can use grouping to have the subreport print on the next page if the entire subreport cannot print on the current page. However, I want to have the break occur not for the section as a whole but between records. Let me illustrate this.
All sorts of other stuff prints at the top. At the bottom, I have a subreport which today prints the following on the first page and breaks the last record in two printing the second line on the next page.
First Page of the Report:
__________________________________________________ _______________
Doctor's Full Name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Doctor's Location: XXXXXXXXXXXX
Doctor's Full Name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Doctor's Location: XXXXXXXXXXXX
Doctor's Full Name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
__________________________________________________ _______________
Second Page of the Report:
__________________________________________________ _______________
Doctor's Location: XXXXXXXXXXXX
__________________________________________________ _______________
What I would like to do is the following:
First Page of the Report:
__________________________________________________ _______________
Doctor's Full Name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Doctor's Location: XXXXXXXXXXXX
Doctor's Full Name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Doctor's Location: XXXXXXXXXXXX
__________________________________________________ _______________
Second Page of the Report:
__________________________________________________ _______________
Doctor's Full Name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Doctor's Location: XXXXXXXXXXXX
__________________________________________________ _______________
Is it possible to specify that if a complete record within a subreport cannot be printed on the same page to break to the next page without having the whole subreport break to the next page?
I have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.
I have been working on this for over a week in Access 2010 and I know that I am almost there, but need getting over this last hurdle as I have a severe case of tunnel vision on this while I am trying to get it to work.
I have a Main Report based on my Element table and a subreport based on my OTC table. There is a one-to-many relationship between the Element and the OTC table.My Master / Child Fields between the two reports are as follows: ElementID;GroupNum
My SQL for the Main report is:
Code: SELECT Val(DCount("*","Element","ElementID=" & [ElementID] & " AND Step <" & [Step]))2 AS GroupNum, Element.ElementID, Element.ProcessID, Element.ModelID, Element.Step, Element.ElementDescription, Element.RevDate, Element.GPCFS, Element.TrainingGate FROM Element
[code]...
As an example in testing this report, I am looking at a specific Element with 33 records and a total of 72 OTC records. Each of the 33 records can have 1 or 2 or 3 or up to 4 OTC records but the report is only 17 pages which tells me that the page break is occuring based on the ElementID and not on the OTC records....
If I have a report and it has controls (labels representing column titles) in the page header. Now when I print the report - if it happens that the last page has no detail records - but there is text boxes and so forth in the report footer. Is there a way to not display the page header on the last page?
I have a report where the last page shows the page header - and the field/column labels on the page header - but for which there is no detail records left to display - on the last page. There is report footer information that should display. It just looks weird because the field/column labels show at the top of the page - but there is no data remaining to print under them on that last page.
In Access 2010 I am previewing a customer report. I also try to give users the choice of seeing history sub records for any given customer. I have a selection dropdown box where they can chose ALL, 5, 10 or 15 in a report. To this end I set the record source in the "Open" event for the subreport. if I want all records it works fine, but as soon as I put in "SELECT TOP 5" the subreport goes invisible. I have tested the query directly and it works fine. I'm sure this worked in Access 2007
I have a report that is fixed at one page for one record. However, there is a subreport with many transactions ("CanGrow"=No). If this goes to a new page I have to close the report and start a new one. This all works fine, except for the last transaction - if the second-to-last transaction record is at the bottom of a page then the last one does not print.
Access seems to format the data, then it realizes that it won't fit on the page so doesn't print it. I am using record id number to know which transaction record to start the next report on, so when it gets to the end my logic thinks it has reached the end as the id number is the last one in the set.
How can I know if the last record has printed or not?
I have seen large projects in which there are clearly several printed database reports printed out to make one booklet.
1. How does one get page numbers for multiple reports to go in sequence instead of starting over again at 1 for each report.
2. How can you add a page reference in one report to something in another report?
Do you have to do these things by hand or is there a way to create a something with auto numbering capabilities? Do you do it by importing the reports to MS Word and creating a master document?
I have a report having data from query i have taken only 4 fields from query in detail section of report in design view.
What i want is that the report to print for single record single page means currently it is printing one more record on one page which i don't want and i want the report to show or print like all four fields for one record on one page how to do this...
I deal with different blood test reports for same patient on different dates. Because tests are so many, so i have arranged them on different pages of the same main report. But the problem is, that access shows different records of the same tests for different dates one under the other as a set...while i want it to show in parallel columns with test label on left side and column heads as different dates.
I've used the following code on the footer on print procedure:
Private Sub PageFooterSection_Print(Cancel As Integer, PrintCount As Integer) Me.PageFooterSection.Visible = (Me.[Page] = 1) End Sub
This works fine when you view it in print preview, but the footer don't show up at all when you actually print it.The reports default view itself is set print preview.
So I am adding a chart (on a subreport) to a report that has multiple subreports already. I have gotten the chart to show up correctly on the report, but now 2 of my other subreports are not working. I am being prompted to input parameters for these subreports that used to pull their parameters (between dates) from the main report.
I read somewhere that charts master/child linking doesn't work but I'm not sure if that applies to subreports with charts on them, or just charts in general. I've tried changing the query on the chart subreport a little without luck. Is this likely some glitch thing? Should I keep trying to alter the query or maybe there is some other work around option?
I have a main report with 3 sub reports.The Sub reports have onload events that fill up the text boxes with VBA code. When I open the sub report alone everything works fine. But when I open the main report, the on load of the subreport wont work.
I have a report with several subreports. I need to total the subreports onto the main report. How do I refer to the control on the subreport?I know that with a form / subform I would use: Me!Subform1.Form!Controlname.But simply replacing 'Form' with 'Report' doesn't seem to work.
I have a main report with several subreports. Some subreports have other nested subreports. all of the reports and subreports are based on queries. when a query returns no values, i would still like for the reports and subreports to display in print preview. (currently, they display in report view but not in print preview.)
I tried a few things:
1) I set all report section can shrink options to "No" - (this did not work)
2) I set the can shrink options for all textbox controls, within each report section , to "No" - (this did not work)
3) I moved all controls from the details section of the subreport to the report header section - (when I did this, I got the subreport to show in print preview when the query for a single subreport returns no values but when i have a subreport with nested subreports that have no value, none of them show up in print preview)
I've searched...moving the controls from the details to the report header was the best thing i could find, but again, this only works with a single subreport and not with multiple nested subreports.
I would like to create a report based on a query. The first part is simple enough. However within this query I have a 'Count field' (a total of the number of duplicated this record has appeared in the table). And would like to create a subreport (if possible) based on that value for example. if count > 1 then show subreport.
My question therefore; is the above possible? How would I go about linking this logic with the subreport
I have a report with 2 subreports on it. One of the subreports does not show on the report preview unless I set a breakpoint in the report's code. Set a breakpoint in the code (for no other reason), hit the breakpoint, continue, and the report works fine from then on, until you close the database and open it again, even if you remove the breakpoint. The other subreport, which is similar, always shows fine.
I can't find out what's wrong by setting a breakpoint.
I have a report that calls a subreport. In most instances, the subreport will have no data and I won't want to show the subreport. I've tried various ways to deal with this:
1) Make the subreport property on the main report the minimum height and set CanGrow = Yes 2) Use the Report_NoData event on the subreport and add the code 'Cancel = 1' 3) Make all the fields on the subreport the minimum height and set CanGrow = Yes
None of these seem to work. I don't have any headings on the subreport, so the only price I'm paying is adding a gap onto the main report the size of one detail line of the subreport. Still, it leaves the report lacking professional quality.
I have a main report with one subreport. The main report contains details of a payment being made to a supplier. There is the total amount being paid, and the cheque number being transferred. There is also a field called payref which is made invisible. This is used to link up with the subreport. The amount is the total of several invoices for which payment is being made.
The subreport contains details of each of a number of the invoices being settled. The subreport is linked to the main report via a common field called pay-ref, and the subreport is 'visible'. The subreport prints when placed in the page header section of the main report. However when there is a large number of invoices being shown in the subreport only a certain number appear. It appears that the subreport can only hold a certain number.
When the subreport is put, as it should, in the detail section of the main report, it does not appear at all in the main report. I have no clue why and I have made several reports like this one before.
I have a report with four subreports. If the subreports have no data I have a formula to put the word 'none' in the first field as follows:
=IIf(IsNull([Question]),"None",[Question])
I do a print preview and the word 'None' shows up and subreport looks good when I view just the subreport as well as when I view the full report.
When I print the subreport the text '#Error' prints. When I print the full report I just get a blank space.
I need the subreport to print with the word 'None' if there is not data. How do I accomplish? I tried the above formula both in the query and in the control source of the report. It just comes up blank when I put it in the query.
For my text box, Text255, on the Subreport I have tried:
Code: Private Sub Report_Load() Me.Text255 = DLookup("[Along_line_spacing_%pass]", "Performance_Requirements_Defaults_Table")
The table Performance_Requirements_Defaults_Table has just one record for lookup. No value is returned when I run the main report.
I found this: [URL] .....
And tried adding the lookup code to the main report instead of the Subreport, but I think I am having trouble understanding what they mean here: "Subform1 is the name of the subform CONTROL on mainform" Are they inferring that I need to have a text box on the mainform as well?
I tried using this Me!Subform1.Form!ControlName like this:
I know this is not correct, and I have tried several variations, but I am totally stumped. Everything I have tried with the lookup code in the main report returns "Member Not Found" and Text255 is highlighted. I feel like this should not be such a big problem.
linking a report and a subreport (chart). I have uploaded my sample DB. I'm trying to chart all the individuals and three fields for each Home. Both report and subreport are using the same query for the record source. My charts are blank "All_Homes_Individual_Totals". Just use date range 05/01/14, 06/24/14 on my Main form page for the data.
My second question is how would you create a chart to pull by each individual with their monthly totals per Home using "qry_Community_ Inclusion_ All_Homes" with a report and subreport (chart) as above. Report would show the individual's totals by month for each home.
I have some fields in form that most of the time have data in them. Now comes that when there is no data, there should be one different field filled in with "None."
The client could have 3 types of products, but when he does have none, the "None." should appear. Another catch is that I have the titles for the products on a textbox above the products. Is it possible to have them not appear in the report if the client has no products?
I guess that it could work like in excel with an IF statment. If no values found, then keep those text boxes from appearing on the report and put a text with "None."
