I set up what I thought was a simple query in my DB using it to create a report containing a subreport.
I kind of works, however Access is asking me for the parameter value [Extract Date] multiple times, when in theory it should only ask once!
In addition (and likely related) the Access is then repeating the output multiple times.
I have a form that the user can add Work Order numbers to a text box and pass them to a listbox to collect 1 or more values. Each of which need a separate report with the labour hours for each Work Order.
I am having issues figuring out how to get it to pass them to a query or filter the reports.
I have tried many different examples and nothing seems to work.
Here is my delima, I have a report that I am able to type in a keyword and it will pull up that report exactly as I type the keyword, however, let's say that I want to pull up someone else's report I cannot. I have to exit out of my report and then go back into it and resubmit the new search.
View 13 Replies View RelatedI have created a query with parameters and a report from the query. The report is requesting the paramater multiple times but the query is running fine. How to resolve? Again, the query requests the parameter once but the report multiple times (6x).
View 3 Replies View RelatedI've narrowed my problem to a subreport that prints multiple copies of the report based on the number of items generated in the subreport.
i.e. If I have an instructor registered to teach three classes in the subreport, the main report will print three time (identical). An instructor with two classes will print twice (identical).
No button...just good old "print" how? why? where?
I created the below query to come up with a new form. When I enter a single parameter, it works fine. When I modify the code and enter multiple patameters, it also works fine if I do not enter any information for the parameters. But once I enter one of the parameters information, then it does not come up with anything. I double checked and made sure it was typed in correctly. Is there a trick when entering multiple parameters on a query?
SELECT [JE 06 Log].[Operational Region Name], [JE 06 Log].[Period Name], [JE 06 Log].[Source System], [JE 06 Log].[Source Name], [JE 06 Log].[Category Name], [JE 06 Log].[Associated Category Name], [JE 06 Log].[JE Name], [JE 06 Log].[JE Base #], [JE 06 Log].Area, [JE 06 Log].[Line Description], [JE 06 Log].[Natural Account], [JE 06 Log].Description, [JE 06 Log].[JE Entry Date], [JE 06 Log].[Debit Amount], [JE 06 Log].[Credit Amount], [JE 06 Log].Amount
FROM [JE 06 Log]
WHERE ((([JE 06 Log].[Period Name])=[Enter Period]) AND (([JE 06 Log].[Source Name])=[Enter Path]) AND (([JE 06 Log].[JE Base #])=[Enter Base Number]) AND (([JE 06 Log].[Natural Account])=[Enter Natural Accnt])) OR ((([Enter Period]) Is Null) AND (([Enter Path]) Is Null) AND (([Enter Base Number]) Is Null) AND (([Enter Natural Accnt]) Is Null));
I am really new at access 2003 and queries s forgive me if this question is really dumb/simple/confusing...here goes
I created a query where I ask the user to provide the info for the date range..<[Before date]
it worked fine.
I then added something to the database and ran it again and it now asks me for my date not once, but twice..i then copy and paste query with a new name and it asks me for the same info 4 times
Help me please..Thanks
Hi again everyone,
With help on my first question Ive now got my cascading combo boxes working to a stage that shows all the information I need,
Currently Ive got 4 cbs and they work bring in and updating depending on what is selected in the previous etc etc.
combo1 = 2
combo2 = 5
combo3 = null
combo4 = null
how can I tell it to use combo2 since there is no values selected in 3 and 4
Ive currently got the combo boxes in a form of their own, basically in my main form Id like to be able to click on a button to update a value, and then it will bring up the form for the combo boxes, then id select the values till I had what i needed, and then it would fill in the value on the main form with my selection from the combo boxes,
to make it abit harder, on the main page, there is 3 values that will need to get their value from the combo boxes, will that just mean I have to make 3 forms with the combo boxes in them, one for each of the values on the main page, or could I just have one form and maybe put a button saying (Use this Selection for Value 1)(Use this Selection for Value 2) etc etc.
Ive looked through the net alot and cant seem to find any examples that suit my question... but if anyone knows of a good example that would be awesome.
Cheer Ezy
I have a report that is pulling data from a query and on the report, i have a controlled field that is supposed to count only data where a field says "no". Here is the string.
=Sum(IIf([Caller Used Resources]="No",1,0))
when i run the report i get the four results that say no, but i also get a blank field counting the times when this field is blank. If this field is blank, i don't want it to show anything.
hi
I've got a series of analytical data tables and queries setup.
one of the queries will do a length weighted average based on a user input FROM and TO distances, this query works fine and produces a report.
What I have is a table that contains a list of m FROM TO distances,
rather than picking them one at a time I'd like to set up a report that would get the FROM TO info from the Table, call the query and report each of the FROM TO distance averages on a line in the report.
What's the easiest method to use to set this up. any code snipets would help to get me started and any help greatly appreciated.
Hello All,
I am creating a database that is supposed to capture the employee's type of work, time it takes to do the work, etc...
So far, it does what it's supposed to do but my record's are all over the place.
E.g. i have tables called:
tblDailyActivities - this table is supposed to store all record without sorting.
tblemployees - this table is supposed to have a list of employees and when maximized, all records associated to that particular employee should be listed.
However, the i have right now is that instead of listing it under the particular employee, it lists the employee's name individually for each item listed.
What i want is to for the tblemployees to be listed like tblfunctions.
see attached database since i probably am not making any sense right now.
Thank you,
John
I have a report with a subreport. I have added a parameter to the query to prompt for [manager] or is null to get all managers. However, on the report when I enter a manager my count on the subreport still returns the count for all. So, I added the same prompt to the query for the subreport. It returns the right count, however, it prompts for the manager multiple times. How do I get it to prompt only once yet get the right total?
View 1 Replies View RelatedHi there,
I'm trying to 'rank' x5 categories that overlap. To determine the ranking i'm utilising date & time (if the dates are equal). I've managed to do this comparing x2 of the categories but struggling with the logic for x3,x4 & x5 categories
I have the data in separate tables by category date & time and in one large table.
Hoping someone can assist as my head is starting to hurt.
Thanks
I hope someone can help me on my problem below:-
A user wanted to key in the data in a single form where she can select where
a particular procedure is located. The procedure could be duplicated and
placed in a few departments.
My tables are as follows:-
tbl_Proc_Dept:-
ProcNo - Text (Primary)
TrgConducted - Yes/No
DeptAbbv - Text (Primary)
tbl_Dept:-
DeptAbbv:- Text (Primary)
DeptDetails:- Text
I created a form where i have the following fields in the form:-
1. ProcedureNo - Text
2. TrgConducted - CheckBox
3. MainDept- ComboBox (DeptAbbv data field)
4. Finance – CheckBox (DeptAbbv data field?)
5. Admin – CheckBox (DeptAbbv data field?)
6. Purchasing – CheckBox (DeptAbbv data field?)
7. Facilities – CheckBox (DeptAbbv data field?)
8. MIS – CheckBox (DeptAbbv data field?)
How can I add multiple deptabbv field in a single form?
Pls help.
Thanks.
I have a report that is based on a query. In the query, I have it prompt for a criteria for a field. It prompts for the name of an event, so only the participants of that event are displayed.
Also on that report, I have a subreport, which is based on that same query, but returns different data.
My problem is that since both the main report and the subreport are based on the query that prompts for input, it's prompting me multiple times for the same input when I view the report.
Is there a way to have Access use the same prompted input for both reports, so I don't have to enter it more than once?
Hey all, i would appreciate some help with Access here.
I am an attorney, and i am trying to set up an access database for all of my cases.
I have one table in which i keep the names, contact information, etc of all the witnesses who i have used or will be using (especially expert or law enforcement witnesses who i will be using in multiple cases).
I also have a main table in which i have a record for each case. Because I have multiple witnesses for most of my cases, I have had to create multiple relationships between my main cases table and my witnesses table.
My question is this: How do I specify when setting up a report (or a form/query/etc) that when i ask for the witness's address i am looking for the address i made with a particular witness, specify that relationship between the two tables, as opposed to the other relationships between the same two tables.
I hope that makes sense, and i would very much appreciate if someone could give me instructions.
Thank you.
Jay B
I have a situation where I am using a maketable query to create a table and then I need to use append queries to then add additional records to the created table - some of these are just run once and some multiple times.
if possible, I do not want to hard code the query multiple times i.e.
Code:
DoCmd.OpenQuery "qryCreate_1"
DoCmd.OpenQuery "qryAppend_1"
DoCmd.OpenQuery "qryAppend_1"
DoCmd.OpenQuery "qryAppend_1"
etc
So is there a way I can run the make table query and then get some sort of loop to run the append query a number of times ?
At the moment I am working a little project at work and am stuck on how to calculate departments due date based on actual order due date.
example:
OrderID: xxxxxx-xx DueDate: 10/8/13
Now let say i have 5 different departments but I want/need to know what should be the due date for each of those departments based on the due date on top.
So i have a union query pulling together about 3,000 records from other queries.
I arranged all the counts and data I need to fit onto one page, but the report is copying that page (minus the header) for each record in the union query. I'd much prefer a one page report rather than a 3,000 page report.
Why does it do that? All I want is a one page report, how can I make that happen?
I have a question related with a report i`m using to print labels. I am not familiar with Access and this is quite a challenge to do it alone.
In the attached file there is a report called "MICRA", when started it asks that you want to select (default is 1 and special select in this case is 11) and next it asks "SPS", the value entered there is printed in the bottom right corner of the report.
My question is is it possible if in the SPS field is entered a special value (for example "MASS") to print 30 labels of each selected label with text in this fiels = "val.1"; 15 with text in the field = "val.2"; 10 with "val.3" and 10 with "val.4" and after that to print next label with same rules...
And if not entered "MASS" to print just 4 copies of every label.
Hi,
I need to run a parameter query in which you enter a product number and the query (a) returns the list of components and (b) then automatically reruns the query for these components. In other words, I enter an input (a product number) the query gives me outputs (component numbers) and then reruns the query with each of these outputs as the input (i.e. I want to know what are the sub-components of these components). This process stops when all the components are raw materials -- this will be easily identifiable.
Does anyone know how to set-up this type of query?
Thanks!
Andre
I'm trying to clean up one HUGE and ugly form by using subforms within tabs. I have a main form with "BottleID" as the key field and linking field. The tab displays pictures based on the BottleID and it works like a dream. My problem is that the "on_current" event happens 4 times on each record. For instance, I go up a record and it sets Picture1.value 4 times and it's the same thing everytime.
I'm wondering if the problems is due to bad table design. Everything is located within one table and I'm really unable to change this. It's been like this from the get go and too much to change to break it apart. Anyway, the subform is pulling data from the same table. I thought maybe this was the cause.
I'd post the database if possible, however there are hardcoded directory's and will not work unless they are all set up. Not worth it IMO. Any ideas? I tried doing the BottleID = forms!frmMain!BottleID instead of the auto-link in Access but it gives me several errors and I don't believe it buys me anything. Thanks in advance!
Preamble edit: I'm running Access 2003.
I have two tables, Students and AttendanceRecords.
Students just has studentID and studentName
AttendanceRecords has AttRecID, studentID, presence, thedate
I'm looking to create what looks like an Excel grid, with the last 10 days as columns and the student names as rows. All the cells in middle will be filled with the values of 'presence' for that student/day (e.g., P for present, A for absent).
Here's something I'm currently considering.
-I could make 10 queries, each using LEFT JOIN to connect studentName with presence & thedate on studentID, varying the 10 queries only in that 'thedate' will have a criteria of Date() -1 , Date() -2 , etc.
-If I'm understanding it correctly, I'll then have 10 tables, each containing 3 rows -- student name, presence, and the date (with each table having only 1 date repeated throughout).
-I could then join those 10 queries together on studentName, theoretically resulting in 1 big table with all the student names and the corresponding presence values for the last 10 days
If I do that, I could make a form in Continuous view and have each row show the studentName and 10 text boxes closely bunched up with presence values.
That seems very inefficient? Making 10 queries separately and then manually merging them seems redundant.
Also, now that I think about it, will the final product end up being read-only, or if the user changes one of the presence cells will it update the corresponding record in AttendanceRecord?
I have one table like:
ID Type No
-----------------
1 FL 2
2 DL 3
I need the following table to be created using first table , each record should be duplicated according to value in No field:
ID Type No
-----------------
1 FL 2
1 FL 2
2 DL 3
2 DL 3
2 DL 3
I am trying to strengthen an already developed database at my work. They had a form with five different text boxes, each one that would run a seperate query on the same table, and the results would open on a different page. I am trying to combine all these text search parameters from the form to a single query and have the result come up on the form. I have done every search I can thing of from a forum search, a google search, and just reading through query forum posts for about a day; but I still cannot tell what is wrong. If someone could look at my code, and see if I have a mistake, or if I'm even in the right direction. :confused:
SELECT FLIGHTS.[FINISH OD], FLIGHTS.[PIPE OD/SHAFT OD], FLIGHTS.PITCH, FLIGHTS.[TYPE OF MATERIAL], FLIGHTS.[BURNED OD], FLIGHTS.[BURNED ID], FLIGHTS.[RIGHT/LEFT HAND], FLIGHTS.PartNumber, FLIGHTS.COMMENTS, FLIGHTS.[START TIME], FLIGHTS.[FINISH TIME], FLIGHTS.PurchaseOrderNumber, FLIGHTS.QTY
FROM FLIGHTS
WHERE ((FLIGHTS.[FINISH OD]=Forms![KNOWN BURN SIZES]!Text25 & "*") And (FLIGHTS.PITCH=Forms![KNOWN BURN SIZES]!text37 & "*") And (FLIGHTS.[TYPE OF MATERIAL]=Forms![KNOWN BURN SIZES]!Text32 & "*") And (FLIGHTS.PartNumber=Forms![KNOWN BURN SIZES]!Text0 & "*") And (FLIGHTS.PurchaseOrderNumber=Forms![KNOWN BURN SIZES]!text36 & "*"));
The FLIGHTS is the main table, [KNOWN BURN TABLES] is the form that the parameters are entered. I want users to be able to enter any fields they want and leave others blank. Currently all I get is a blank query. Sorry if the answer seems obvious; I tried avoiding posting till I knew that I couldn't figure it out on my own.
Thanks.
-Brian
I often use forms to select a parameter & date range for a subsequent report. Where I have chosen to use multiple combo boxes (two in this case)to select more than one parameter I have run into a problem. The report opens ok the first time but if I close it (report) and change my selection then the report refuses to open. Should I just requery the two combo boxes, is there something else or can't it be fixed?
View 1 Replies View Related