Reports :: Passing Date Range Parameter To Multiple Sub-reports

Nov 4, 2013

I am trying to pass a date range parameter & an additional parameter (Type of Audit) to 6 subreports based off individual crosstab queries and housed on one Unbound Report ("rptFinal").I have an Unbound Form "frmDate" passing a date range and Type of Audit using [Start Date] and [End Date] to rptFinal with a button that simply opens the rptFinal as follows:

stDocName = "rptFinal"
DoCmd.OpenReport stDocName, acViewReport

In each Crosstab query, I have set the parameter criteria (in both the Parameter section & the query itself) to:

[Forms]![FrmDate]![Start Date] And [Forms]![FrmDate]![End Date]
and also,
[Forms]![FrmDate]![Enter Type of Audit]

On each subreports On Load Event, I have added:

Private Sub Report_Load()
Me.Filter = "[DteAuditDate] BETWEEN #" & Forms!frmDate![Start Date] & "# AND #" & Forms!frmDate![End Date] & "#"
Me.Filter = "[Type of Audit] = #" & Forms!frmDate![Enter Type of Audit] & "#"
End Sub

and I've set the Filter On Load property to: Yes..I can open frmDate, fill in the date and Type of Audit, launch the report and it runs with no error, I have 6 blank subreports in report Preview. The headers are showing up but none of the data.

View Replies


ADVERTISEMENT

1 Date Range With Multiple Reports / Queries

May 19, 2006

Hello All,

I am trying automate some report printing.

I have around 20 reports most of which require a from date and a two date.

If I use the code below, it asks for the from a two date on each report print, but the dates are always the same.

Is there a way of take a two date and a from date at the start of the sequence and insert it into each reports date range prompts?


Private Sub btnME_Click()

MsgBox "Please note, this process can take upto 5 minutes to complete."

DoCmd.SetWarnings False

DoCmd.OpenQuery "qry1"
DoCmd.OpenReport "rpt1", acNormal
DoCmd.OpenReport "rpt2", acNormal

DoCmd.SetWarnings True

MsgBox "Reports have been printed, aggregated results have been inputed into 'workstats_automated.xls'"

End Sub

View 14 Replies View Related

Reports With Date Range In The Title

Nov 2, 2004

I have a report called rpt_date_range it is based off of the query qry_date_range.

qry_date_range has "Between [Start Date] And [End Date]" in the criteria for the date field.

In the report header, I have the title "All records from [Start Date] to [End Date]"

What I want to do is to take what is entered into the [Start Date] and [End Date] and put that into the title in the report header. At the moment, I don't know how.

Thanks in advance

View 2 Replies View Related

Reports :: Subtotal By Date Range

Apr 3, 2014

I have a set of records that contain the following attributes;R_Name, Cost, StartDate, EndDateI need to subtotal the cost for each R_Name by year. The start and end date attributes can span several years and I need the correct cost for partial years.

View 5 Replies View Related

Reports :: Date Range From Query Not Matching

Jun 19, 2013

When I run my query that has a MINDATE and MAXDATE column, i can see the full range of call dates. The earliest date is 06/04/2013 and the latest date is 06/19/2013.

When I run a report with text fields of MINDATE and MAXDATE off that query the range shows as 06/04/2013 to 06/04/2013...

What I am trying to accomplish is for the report to express the range of dates. the report asks the user to enter a beginning date and an ending date for their search and I want them to know the actual range. The data appears to be accurate but the dates don't work.

View 1 Replies View Related

Reports :: Date Range Filter For Report

May 27, 2015

The data the query pulls is employee name, course ID, course name and course completed date. I have added criteria in the query that asks for the Course ID to filter on a given course and a dynamic field in the query AnnualReqDate: DateAdd("d",+365,[TrainingCourseCompleted]). What this returns is a list of employees that have completed course X the date they completed and the date (12 months) when the course is due. This works great, have created a report that reflects this very well.

The issue comes in when I try to add the ability to filter by date range on the AnnualReqDate dynamic field. the AnnualReqDate dynamic field does not exist until the query is run the Between [Start Date] And [End Date] criteria add to the AnnualReqDate dynamic field wont work.The query fires off but returns zero records.

View 14 Replies View Related

Reports :: Show Date Range In Report From Query

Apr 18, 2013

I have a report, based on a query, where the field name is "Date of Work". The criteria in this query field is >=[Start Date] And <=[End Date], which works fine. However I need to have the start and end dates to show in the resulting report header based on the query.

View 1 Replies View Related

Reports :: Export Data By Selecting Date Range

Oct 27, 2013

I would like to create a excel file to let the user to input the following column.

Date No. of success No. of failure
==== ============ ==============
" " "
" " "
" " "

I would like to have a function that can allow the user to select the date range and its total no. of success and no. of failure. For example , the user select from 31-03-2001 to 31-12-2012 , then output the report which show the total no. of success and no. of failure in this date range , is there existing tamplate that I can use ? if no , what is the simplier way to do it ?

If the data is very large , I want to create a access db to store it, how to do it ?

View 4 Replies View Related

Reports :: Selection Criteria - Date Range To Be Queried

Sep 18, 2014

I have a report based on a query that returns all info from the query which is fine, I now need to amend this so that individual users can specify the date range to be queried and the person for whom the results are required (one of the query strings)...

View 1 Replies View Related

Reports :: Requesting Parameter Multiple Times

May 29, 2014

I have created a query with parameters and a report from the query. The report is requesting the paramater multiple times but the query is running fine. How to resolve? Again, the query requests the parameter once but the report multiple times (6x).

View 3 Replies View Related

Reports :: Create Report With Parameters - Unit From Combobox And Date Range

Jan 29, 2015

What I have is a single table that I need to create a report from. It has vehicle unit numbers, dates of service, repair details and costs. I am trying to generate a report where I can select a unit from a combobox and enter a date range.

View 1 Replies View Related

Reports :: Print Only Report Matching Current Record In Form Among Multiple Reports

Oct 2, 2013

I have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.

1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)

2. If user presses the Print button before pressing Save button then system should prompt user.

Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):

Private bSaveClicked As Boolean
Private Sub Form_BeforeUpdate(Cancel As Integer)
If Not bSaveClicked Then
MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation
Cancel = True

[code]...

View 5 Replies View Related

Reports :: Pass Listbox Parameters To Pull Multiple Separate Reports

Nov 23, 2013

I have a form that the user can add Work Order numbers to a text box and pass them to a listbox to collect 1 or more values. Each of which need a separate report with the labour hours for each Work Order.

I am having issues figuring out how to get it to pass them to a query or filter the reports.

I have tried many different examples and nothing seems to work.

View 4 Replies View Related

Modules & VBA :: Passing Parameter And Date To Query

Nov 10, 2014

I have the following Visual Basic code which I am using to dynamically pass the parameters "SAFP" and date 10/31/2014 to the query:

Option Compare Database

'------------------------------------------------------------
' Run_Risk_Assessment_Report
'
'------------------------------------------------------------
'Original macro code
Function Run_Risk_Assessment_Report()
On Error GoTo Run_Risk_Assessment_Report_Err
Dim dbs As DAO.Database
Dim test1 As DAO.QueryDef

[Code] ....

When I run the query, i get the error "Item not Found in this collection"

View 14 Replies View Related

Parameter Box Date Range

Jun 19, 2013

My table has one date of service field. In my query, I have a criteria to query a range, e.g., Between 03/01/2013 and 05/31/2013. Is there a way to put this in a parameter box so when users click the query they will get a parameter box to enter date range? I know how this works for a single date, not sure if it can be done with a range.

View 14 Replies View Related

Reports :: Setting Filters - Updating On Multiple Sub Reports?

Apr 26, 2015

I have created a report which contains within it multiple sub-reports, which I use to generate a document for management meetings on a bi-weekly basis.

For each of these I have the subreports filtered to a unique number for consideration that period e.g. LIKE "88/00039" which relates to my data.

In order to change this I have to manually update each of the filter commands within the subreports but I assume there must be an easier 'catch-all' method of achieving this?

Ideally I'd be looking for a command prompt so I could enter just the number sequence e.g. "88/00040" and then enter this (via a corresponding macro or similar) to update the filter commands.

View 2 Replies View Related

Reports :: Open Multiple Reports With A Common Field

Mar 30, 2014

I have four forms named [Information Form], [Evidence Form], [Subject Form], and [Vehicle Form]. The Final Form is a Tabbed Form named [New Incident]. The tabbed form has four tabs, with each tab displaying one of the forms above. I also have a Print Command Button named [Print All] underneath the tabbed portion of the [New Incident] form.

Also, All of the four forms are set to data entry - yes, so that on open they will be clean and read for new record entry. I need the [Print All] button to do, just that, print everything that has or has not just been entered into the four forms, even if some are printed blank because they were not necessary for this particular report. One thin of note is that each form on the tab has a field for the "Incident Number" which will be the same for all four forms.

View 12 Replies View Related

Reports :: Publishing Multiple Copies Of Selected Reports

Nov 18, 2013

I am trying to add to a db I inherited. One of the end reports that is produced is a cost breakdown for each end user.As things stand, the data collates into individual reports which are then grouped into one file and saved via PDF. What I am trying to work out is whether or not I can selectively pick some of those reports to have more than one copy.

I see a form (within an existing form) that will list all of the end users for a particular scheme and, next to that, be a dropdown that will allow the db user to select how many copies of each report needs to be published. These will then collate merrily into one document to be saved to PDF.

View 8 Replies View Related

Reports :: Generating Multiple Reports Based On 1 Query

May 2, 2014

I have a queries that do all the calculations and dumps the output to Query X for all different types of customers. At the moment I am required to generate a report for each of the customers and send it to them, manually.

End Goal:Initiate a Macro (at a given time at a given frequency) that would run a process to generate different reports for all different types of customers using a standard report template. I am also trying to avoid having to create a report for each customer (as the customer base grows, the report count will grow) so looking at something that would look into Query X and generate # of reports depending on number of customers.

View 6 Replies View Related

Reports :: Can Create A Date Parameter Box Open Up / When Open Report

Sep 21, 2014

I have a report based on a query that has data for many dates. At the moment I have put a specific date in the criteria of the query so that I could build the report format. So it now displays all the data for the date i have in the criteria section. I will need to run this report several times per week so the specified date (and corresponding data in the report) will need to be changed to a new date when I open the report i.e. when I open my report I want to show data in the report only for a specified date.

Can I create a date parameter box open up when I open the report? Can I create a form with a button that when I click will open the report displaying data for that date? What would be the best way?I also need to display the specified date on the report.

View 5 Replies View Related

Reports :: Print Multiple Reports To PDF In New Directory

Jan 5, 2015

Every month, I create 15 individual reports with each report filtered by two fields, let's say Dept and Exec. You change Dept and Exec via a combo box drop down based on a table, and this information is passed to the query behind the report. Now, I repeat this process for every report. I use an unbound form that gathers the "Title", which is the Dept Name +"Special Report"; report Date using "as of" [DATE], and an updated through [Second Date].

Each monthly set of reports is sent to a new directory and folder (i.e. M:MOR Reports2005January. This changes each month. Somehow, I'd like to automate this where each report prints with its name to a newly created folder in pdf format.

I have been reading prior posts and am coming up with some ideas like adding a "selected" field to the Dept/Exec table and then step through those selected records to determine which report you are running. It takes a long time to print these to pdf in a new directory every month.

View 11 Replies View Related

Reports :: Open Multiple Reports Using For Loop

Oct 25, 2013

I wanted to print multiple reports using for loop but I am not sure how to start with.

This is basically my idea:

1. Create a hidden indicator, I name it txtHidden.
2. I have one table, there are one column for "report name".
3. I have one query, filtered the "report name" column according to txtHidden, criteria written in the design view.
4. Using For loop, browse through all the existing report.
5. Every loop, txtHidden will equals to every reportItem.Name. Query will run.
6. If Query is no result, dont open report, if query returns some result, open the report.

I wanted to code something as below, but I dont know what to put in the [Dont know what to type] field...

For Each [Dont know what to type] In Access.Reports
[Forms]![frmStartup]![txtHidden] =[ Dont know what to type] .Name
If DCount("*", "ReportQuery", "") > 0 Then
DoCmd.OpenReport [Forms]![frmStartup]![txtHidden], acViewPreview
End If
Next

Can ignore the query part. It is working fine.

View 4 Replies View Related

Reports :: Printing Multiple Reports From One Button

Apr 23, 2014

I have a form that produces Year end accounts, therefore each page is totally different from one another, there are 10 reports per set of accounts.

I have created 10 buttons that out puts the desired report

Profit and Lost, Balance Sheet etc.....

What I would like now is a way to print all 10 reports with the click of a button, how can this be done...

View 7 Replies View Related

Queries :: Date Range Parameter Query

Jan 8, 2015

I have a query that is hard coded with a date range.

SELECT tblCase.CaseId, tblCase.ReqReceived, tblCase.Letter_AMPI,
FROM tblCase
WHERE (((tblCase.Letter_AMPI) Between #4/1/2014# And #3/31/2015#)) OR (((tblCase.ReqReceived) Between #4/1/2014# And #3/31/2015#))
ORDER BY tblCase.CaseId;

I would like to create a parameter query that allows me to only enter the year and the query would append the rest of the date range. So for example, if I prompt the user to enter the date and they enter 2014, the query would know that it means Between #4/1/2014# And #3/31/2015# or if I enter 2015, it means Between #4/1/2015# And #3/31/2016#.As well the date would need to go into both fields ReqReceived and Letter_AMPI.

View 3 Replies View Related

Reports :: Passing Data To Report From A ListBox

Mar 14, 2013

How can I pass data (an employee's first and last name) to a report ? I captured the employee's name from the listbox, but can't seem to pass it to the report. The desired report will only have the employee's name and records for related fields on the report. The table (contains emloyees' history data), form name, listBox (contains employees' names), and variable (contains the employee's name) are listed below.

Table_Employee_Detail_History
Form_Employee's Reports
Report_Attendance_Report
stremployee (variable

View 14 Replies View Related

Reports :: Passing A Variable To A Report Textbox

Sep 16, 2014

I have a form with 5 buttons on it. Each button is meant to select a warehouse location, so a query can be run to give an inventory report for that location. There is a separate query for each button and the OnClick event does properly modify the recordsource to give the appropriate data to the report for the location selected.

To this functionality I want the OnClick event VBA to pass the warehouse location to a textbox on the report, so the title of the report reflects that inventory location.

My code thus far is:

Private Sub Command5_Click()
Dim mySQL As String
Dim WHSE As String
mySQL = "SELECT [Master Part List].[Part Number], [Master Part List].Category, [Master Part List].Description, [Master Part List].MaterialCost, [Master Part List].Inventory, [Master Part List].Update, [MaterialCost]*[Inventory] AS [Total Cost], [Master Part List].Warehouse"

[Code] ....

When I get the report, the textbox is empty, instead of containing the text value for the warehouse location.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved