Reports :: Possible To Create Two Different Labels On Same Report?
Feb 12, 2014
1Create a report called rptCustomersByGender. The report should:
a.Print your company's name at the top of the first page only
b.Print your data labels at the top of each page
c.Group your data by gender
d.Display all the customer information in the detail section
e.The customers should display in ascending numerical order by Last Name
f.Below the list of Female customers, it should say: "Total number of Female Customers:" and then the total number of female customers should display. Do the same for the male customers
g.The page number should display at the bottom of every page
h.The list of Female and Male customers should each print starting on a separate page.
i.Make sure the report runs without producing any errors and looks professional.
I created a report and grouped it by gender but I can't do step F. creating two different labels for each group..
I am making labels to stick on containers that we're shipping out. Some shipments will have only 1 container and some will have more than 1.Can I have it repeat a label if there are more than 1 container for an order?
For example: Shipment 1 has 3 containers. The label says "3 x DM" and it will make one label.
Can I set it somehow to print that label three times? What about adding incremental text, e.g. 1 of 3, 2 of 3, 3 of 3?
I have a non standard size report (for printing labels)
The report is just over 10cm wide and just over 15cm deep.
I have solved the blank pages caused by exceeding the width but I'm still getting a blank page when I move some data down. I am still within 15 cm but it's throwing me a blank page. Even if I extend the in design mode depth to say 20cm (ie the height in Detail) it's throwing a blank page (I can see this in print preview).
I initially set up the report (it's a long time ago so memory fades) using the label wizard setting up a label 4*6 inches (10.16 * 15.24 cms) and it is this i'm trying to tweak. Is there a property I'm missing somewhere?
I have always noticed that when creating a report, when you make a paragraph using a label, the alignment and size of the text/paragraph is always different when you preview the report than when you design it.
This makes alignment of paragraphs tricky, especially when you are trying to insert a bold faced word into the middle of a block of text by using a separate label.
Is there a way to have say five different reports that give out information and at the bottom the totals. I would like to take each of those separate reports to create one report with just the totals.
I am having a DB and a report is there from query now what i want is ;
if query fields are apple, bat, cat, dog, elephant and I want in report the first three fields like apple, bat, cat to be displayed at first page then remaining on next and so on. Whereas I have a proper report header and footer which I do not want to change for any page means will remain same for all pages..
I'm having an issue trying to get a report to show a single customers' data on one report. The way I am doing it at the minute isn't really a way I would like to do it, using a query to create the report, but I don't know how to do it via a form. Basically when I do it at the minute, it will create an invoice... but with every customers' data on the same report.
But what I want to do is have it so that when I create a new record in a form, when I press a button it will create a report with just the information in that form and the details of the customer (as the form only uses the customers' ID)...
I have a database in MS SQL. The users connect to database via MS ACCES ADP applications.
Some tables (like a TV Station or Names of employees) in the database have fields that serve as the flags. If the flag has a value of one, then such a record is used in the query to create a report.
Because there are multiple users of the database, frequently happens that flags overlap. One user sets the flag to one, and second sets the flag to zero. Therefore, it often happens that the received report incorrect.
I'm working with getting a 3 page report to print/create PDF of the 3 pages. Right now I have the formatting set up for the 3 pages but each is an individual report.Is there a way to combine the reports into a single report? I've been messing around with subreports but can't get it to display correctly.
I have a query which displays only the records that match the criteria in the form given before. Now i want to create separate report for each of these records. How should i go about with it? I don't want a seperate form for this purpose, is there any way to do the same with a macro?
I want to present some data in what seems to me like it would be a very natural and normal format, however have so far been unable to figure out how to do it.I record attendance data for a children's after school club in a table as follows (simplified):
AttendanceID - autonumber AttendeeName - text AttendanceDate - date Attended - True / False
The data looks like this in the table. I would like to be able to easily see who attended on which days, so I would like to therefore see the data laid out like this:
The Crosstab query looks almost like it would do what I wanted, however it seems to insist on adding something up, rather than just showing me the value true or false.
I've created a custom ribbon and it works great however I want to create a separate ribbon and attach it to the report. On this particular ribbon, I'd like the export to excel, export to word and print functions to appear ONLY for reports. Not all reports will need to be exported; it depends what the user does. I've created this XML and I'm not receiving any error message. It loads as expected but my group is blank/empty. Still confused.
I have a field on a form (exception) that is also a column in a query. I would like to create a report an only show those records that had an exception in it. I am not sure what criteria in the query to use, but it would seem creating a report off of this query would work.
I have a report that groups by a project name and then a repeating field to list all associated detail having to do with the project. Then the projects loop to the next.Each project row is the same height as the combined detail rows. And to be able to print guidelines just as you would with a word table.
This is what currently happens. +-------+-----------------+---------+ | Project.|.-detail row 1......| Open.....| +-------+-----------------+---------+ ............|.-detail row 2......| ............+-----------------+ ............|.- detail row 3......| ............+-----------------+
I'm thinking I need to do it with vba putting each into a variable then set the field to be the value of the variable. but i'm also not sure how to do that as it repeats like that.
I managed to create a report by user using a combo box. When an user selects a name from the combo box, it generates a report showing all the records by that name.
However, now I need to be able to generate a report as above but between 2 dates. How??
I am having two sets of criteria. 1) by user 2) between 2 dates
I'm trying to create a report that contains data from a "main" form and a subform. However, I can't get the main form data to populate no matter what I try. I've been through all sorts of queries and just can't get it to work. The main form and subform are both separate tables, and there are no redundant fields.
Basically, the main form is an inventory of assets, and the subform is designed as a way to submit trouble tickets when one of those assets requires maintenance or repair.
What I have is a single table that I need to create a report from. It has vehicle unit numbers, dates of service, repair details and costs. I am trying to generate a report where I can select a unit from a combobox and enter a date range.
I am trying to generate a report that is based off of a query. The query has a form filter that it needs to filter the data. I keep getting a jet engine error and couple others.
The form has year, start week, and end week on it. I can get the query to work fine. When I try to open the report, Access says it doesn't recognize the " [Forms]![frmUptimeFilter]![StartWeek] " as a valid field name or expression.
This works great to return a report if the user selects something from the combo box. How do I adapt this so that the user can also leave the combo box blank and filter the report to return all records?Additionally, what if I want to have the user filter between dates selected on the form; i.e. between 'txtStart' and 'txtEnd'
This works just fine in creating the desired result - EXCEPT I don't get all the records.
When I remove the 'cartesian table', and right join everything, then I get the correct results. If I keep everything as-is and reintroduce the cartesian table, then I get an error about there being an ambiguous outer join.
I have a command button that opens a report. The report has many subforms in it. I am sending open args which existingstewardship. I want one of the labels of the labels to be visible if the me.openargs = "existingstewardship". the code is not working. I have tried to debug when I do this I have found the open args are null and I am wondering if the open args are null is this because they were sent to the main report from the command button and the subforms in the main report do not get passed the open args.
Does anyone have any idea ? how I could make the box visible or not visible in subreport from the command button. The other option I have would be two different reports. Thanks PWF
I have created a report to display a bill of materials (boms). The report works as I have designed. I have also figured out how to filter the report using the docmd.openreport vbasic call with filters. This works fine. I use a form to select the filtering I need in the form of 2 Listboxes populated from tables. The form opens, the report generates and displays in preview mode. What I cannot do is the change the title text (Text Label on the report Header). I would like to use the selected items in the listboxes as sources of text for these controls on the report so I can use the report over and over for different boms. ANy help would be greatly appreciated! Vbasic I hope!
I've created labels in my database and when I print them on a label printer, I get a blank label in between my printed labels. I've checked the printer settings and properties and can't find anything. I've also checked the database properties and can't find anything. Is there something in the database that I'm missing?
I currently have a set of labels that works flawlessly - it has 2 columns and 20 rows. I have a form that I can select which label to start printing on so I use up a full sheet with no waste. [working labels attachment]
The labels I'm trying to print on now are 1.25" x 10", as seen HERE. Since I cannot rotate the whole report 90 degrees, I set up the labels to have one column with six rows instead of 6 columns with one row (landscape instead of portrait).
I copied the entire label printing process from the known working report. For my new set of labels, the label prints great if I have just one record, and/or I start at label #1. If I want to start at label #6, it just prints slightly lower on the page instead of at label #6 position (which is the bottom of the page). [label at #6 position attachment].
