Reports :: Print Labels In Subreport While Printing Invoices
Jul 22, 2014
I am printing invoices and need to print the label in a subreport at the end of each customer only once. This is what I want it to look like:
2014 payments applied to cap: GA $8,078.00
NC $1463.00
SC $155.00
NOT
2014 payments applied to cap: GA $8078.00
2014 payments applied to cap: NC $1463.00
2014 payments applied to cap: SC $155.00
I use ACCESS, but I do not know SQL. .
View Replies
ADVERTISEMENT
Jun 11, 2013
I've created labels in my database and when I print them on a label printer, I get a blank label in between my printed labels. I've checked the printer settings and properties and can't find anything. I've also checked the database properties and can't find anything. Is there something in the database that I'm missing?
View 6 Replies
View Related
Dec 9, 2013
I currently have a set of labels that works flawlessly - it has 2 columns and 20 rows. I have a form that I can select which label to start printing on so I use up a full sheet with no waste. [working labels attachment]
The labels I'm trying to print on now are 1.25" x 10", as seen HERE. Since I cannot rotate the whole report 90 degrees, I set up the labels to have one column with six rows instead of 6 columns with one row (landscape instead of portrait).
I copied the entire label printing process from the known working report. For my new set of labels, the label prints great if I have just one record, and/or I start at label #1. If I want to start at label #6, it just prints slightly lower on the page instead of at label #6 position (which is the bottom of the page). [label at #6 position attachment].
View 5 Replies
View Related
Oct 18, 2011
I have a small receiving inspection database that prints lables for each item received. However when they use the program on a different computer the lables do not print on the lable printer at that location.
View 1 Replies
View Related
Jun 4, 2014
I have a report with four subreports. If the subreports have no data I have a formula to put the word 'none' in the first field as follows:
=IIf(IsNull([Question]),"None",[Question])
I do a print preview and the word 'None' shows up and subreport looks good when I view just the subreport as well as when I view the full report.
When I print the subreport the text '#Error' prints. When I print the full report I just get a blank space.
I need the subreport to print with the word 'None' if there is not data. How do I accomplish? I tried the above formula both in the query and in the control source of the report. It just comes up blank when I put it in the query.
View 3 Replies
View Related
Jun 10, 2013
I have a report that should print on labels ready to be stick on a book, but how can I tell the report to start from 3th row 2nd column so I do not waste any labels?
View 4 Replies
View Related
Jan 5, 2015
I have several reports that include subreports in them, each one has a bold border surrounding it. When viewing the reports in Access, the spacing and layout is great.
But when I print the reports--either physically or to PDF--the text within the subreports somehow shifts left and up. Some of the subreports--by virtue of chance--happen to have enough extra space, but others don't and part of the text gets clipped by the border.
I'm not exactly motivated to go through the reports and readjust the layout for each one but if there's a database setting that I can change to correct it that would be nice.
I've attached a screenshot (where the layout is perfect) and a printed PDF (where the text is clipped) of one of the reports. The issue can best be seen in the Public/Private ZooMobile and Indoor/Outdoor ZooMobile subreports.
View 5 Replies
View Related
Aug 13, 2015
I have a non standard size report (for printing labels)
The report is just over 10cm wide and just over 15cm deep.
I have solved the blank pages caused by exceeding the width but I'm still getting a blank page when I move some data down. I am still within 15 cm but it's throwing me a blank page. Even if I extend the in design mode depth to say 20cm (ie the height in Detail) it's throwing a blank page (I can see this in print preview).
I initially set up the report (it's a long time ago so memory fades) using the label wizard setting up a label 4*6 inches (10.16 * 15.24 cms) and it is this i'm trying to tweak. Is there a property I'm missing somewhere?
View 5 Replies
View Related
Jul 11, 2015
I am having a problem setting the margins to print labels in access. I go to page setup and change the margin size click ok and nothing happens to the label and when I go back to page setup the margins have returned to their original values. I have already selected the label printer and labels that im using.So im baffled as to why it wont accept margin values that don't cause the label to be printed over 3 labels.
View 1 Replies
View Related
Feb 4, 2014
I have a report that has two sub reports one to report deposits and the other to report payments.
The report prints fine if there are records in both sub reports, however when the payments sub report is blank then the report hangs and won't print to pdf at all.
View 8 Replies
View Related
Feb 3, 2014
I have to print address labels. 10 x 3.8 cm labels 2 per row 14 per page on an A4 paper. Pretty straightforward one should say. But no. I play around with the margins, column heights and widths, row and column spacing page size wasting time. Is there a hidden and not documented relationship between those elements? For example how is the column height and row spacing linked together? How is this normally done in a professional way?
View 3 Replies
View Related
Jan 12, 2015
I have always noticed that when creating a report, when you make a paragraph using a label, the alignment and size of the text/paragraph is always different when you preview the report than when you design it.
This makes alignment of paragraphs tricky, especially when you are trying to insert a bold faced word into the middle of a block of text by using a separate label.
I am using Access 2000
View 4 Replies
View Related
Sep 19, 2013
I'd like to directly print a report from a button on a form.
I want to click the button and the report just prints to my default printer without any other user interaction.
Currently the print dialog appears but I don't want it.
View 3 Replies
View Related
Apr 22, 2015
I have a form that that contains a button that opens a report. The code I use to open said report is:
Code : DoCmd.OpenReport "Comp and NB Targets Q4", acViewPreview, , strWhere
The issue is that occasionally when the user prints from that preview, it can instead print out the form in the background that was used to open the report.
This seems to happen at random and I have not yet found a pattern or solution to the problem.
Is there a reason this could be happening and is there anyway to stop it?
View 5 Replies
View Related
Nov 12, 2013
I have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.
View 3 Replies
View Related
Jul 24, 2014
I am looking to set up a database where I have a table of records that correspond labels to product numbers. The product numbers may have anywhere from 1 to 30 labels that correspond to them, and I want the user to have a form where they search by a product number and then the labels that correspond to that product number are printed out on an Avery label.
Here is how the main data table will look: (everything is simply arbitrary to illustrate)
For example: If I type in "1111" into the form - the labels that print would be AA, AB, AC, AD, & AE
I know how to set up labels to print using forms, but the only way I can think of this working is by looking up the product number in the table, then copying the row of labels into another table (let's call it "labels to print") and pasting them in a column, then printing to the labels, and clearing the "labels to print" table for the next time.
Is this the correct route to go? If so, how do I go about looking up the product number in the main table and copy them to the "labels to print table".
View 6 Replies
View Related
Dec 6, 2004
Hello everyone! I'm trying to print a single label to a Zebra printer, but I have ran into a small problem. I'm using a checkbox to select the records and a query to catch the record I want printed as a label. I print the label and deselect the record I printed and all works fine. I print the next record and the previous record prints on top the current record. If I turn off the printer in between printing labels all works fine. Any help would be a great because I going to wear out the on/off button on my printer
View 3 Replies
View Related
Jan 2, 2008
I have a table that contains a lot of different information regarding to mailing.
There are columns for Name, Address, Address2, Address 3, City, State, Zip, Country, Base Name, etc.
Some units will only required parts of the above information. I'm using the Name as an identifier in the DB only and Address is the beginning of content that I want to use.
My issue stems out of the fact that the City, State, and Country are not always required but the Base Name, may be used in lieu of the City.
I was looking at making checkboxes next to each of the columns on the form on the field and then using those checkboxes somehow to create a report for Mailing Labels.
I'm just not sure how to set this up.
View 5 Replies
View Related
Feb 22, 2013
I have to develop a software that allows users to print data from a GUI. The GUI is a form containing several fields: the user can choose only the fileds he wants to print (I thought to a checkbox to choose the needed fields)
For each field the user can specify: font, x,y coordinate to locate it into the label to be printed
The user can decide also the format (height,width dimensions) of the label
I imagine that the great difficulties is to find the function to create the string to sent to the printer....
View 1 Replies
View Related
Dec 17, 2004
Access 97.
Not sure if this is the right area to post this question in, but here goes....
I want to print mailing labels but I only want to print selected names from my database, not every name in the database.
How do I do this?
Make it simple, please.
Thanks.
View 1 Replies
View Related
Jan 28, 2014
I have an Access database that includes a customer listing. My client would like me to include a button on a form that prints off all of their customers' names and addresses onto mailing labels. I know how to do it manually by clicking on the Customers table, clicking Labels under the Create ribbon, selecting the fields, selecting the label manufacturer, size, etc. etc., but the customer would prefer to have just one single button.
I've looked everywhere for VBA code to put into a macro that does this. Unfortunately, unlike Excel, Access doesn't have a "Record Macro" option so I can attach it to the button.
Table: Customers
Fields: FirstName LastName Address City State Zip (There are other fields, but they are not relevant to printing address labels)
View 1 Replies
View Related
Mar 1, 2013
I need to print a contiguous subset of records from a table, not the whole table. I'm using a standard Avery #5349 label page, but need to print them in a vertical orientation (2 1/3" wide x 3 3/8" high; 4 across w/2 down), so I have to create a custom landscape label to print on regular 8 1/2" x 11" paper, but defined as landscape 11" x 8.5". When I do Print Preview, and orient the printer to Landscape, the Print Preview still shows Portrait, so I'm losing labels off the right side of the screen.
I know I can export the table to an Excel spreadsheet (to be used by Word's label print functions); the custom label page definition there is correct, and the labels print correctly. But I'm trying to simplify the whole operation by printing the labels from Access.
1. When designing the Access custom label definition, the Edit Label page graphic doesn't reorient and redimension the labels' layout as I enter each label dimension (as it does in Word), so I'm not sure which dimensions are correct (I've tried both ways). When I go for the Print Preview (and specify that the printer is to honor Landscape mode), I'm told that the dimensions won't fit on the page .. and I've seen the messages that say to ignore this if printing multiple labels .. "it'll probably print OK." Do I just (in my mind) rotate the graphic 90 and enter the measurements as I do in Word?
2. I haven't gotten to this point in Access yet: can I format each field differently (font, size) in the 1st label, then replicate that label's design across all (as in Word), then fill with data from the table?
3. I'm a DB lightweight .. how to select a range of records from a table to print to the labels? I don't want to print the whole thing.
4. Similar to #3: if I decide to export a table to a spreadsheet for input to Word, how to export just a range of records? I've been exporting the whole table, then editing the spreadsheet to delete the unwanted records, before inputting it as the Recipient List to Word's label print functions.
I'm trying to develop the necessary techniques at home on my Windows 7, Office 2010 platform. When I get it all figured out, I'll try to implement it on the target platform: my church's XP Office 2007 environment.
View 1 Replies
View Related
Jul 4, 2006
Hi all,I've been struggling with this for a few hours... I sure hope that the solution to my problem is complicated so I don't feel really dumb!I'm trying to design a database to eliminate the HOURS that my mom spends trying to format mailing labels in Word. She deals with about 50 clients at a time, and sometimes needs to print labels for just a selection of them, but not all. I'd like to design a form where she can select (using an option button or similar) the clients for whom she wants to print a label, and print them all at the same time (rather than printing one at a time, which I can handle on my own). Creating mailing labels will be the only function of the db so the info stored in it will be relatively simple.I have the Northwinds db installed, and I've found the sample Macro controlling the Where condition for the labels report. I understand how to make it work for a single selection from a combo box (ie: only print labels for customers from a specific country)I have my report set up so it shows a label for each client, pulling data directly from the main table. No troubles with formatting. **knocks on wood**My problems:1. I searched this site and found a link to the MS KB file that outlines how to print multiples of one label or skip used labels before starting to print (Q95806 - "How to Skip Used Mailing Labels and Print Duplicates"). I'd like to use this, but can't make it work.2. I can't figure out how to "link" the option button to the client name as it's listed in the form, and then tell the report to only print labels for the selected clients.I have very little coding experience but I can make some simple code work and am OK at customizing pre-written code to my own needs if it's well commented, so VB isn't entirely out as an option.I have a possible solution in mind that involves creating a query that makes a new table with only the selected clients, which is then used to make the labels report. I think I could make that work if I could just figure out how to select the clients in the first place.I apologize in advance if this has been taken care of elsewhere. I tried to find it, but had trouble coming up with the right search string!Thanks in advance,~ Mel ~p.s. I'm using Access 2000.
View 3 Replies
View Related
May 8, 2013
I am using access 2010 and have made a simple database for the company I work for. This consists of the a table of the raw data and a form to make the data printable.
I have been asked by our admin person if I can make it possible to be able to print labels from it. I know it is possible via the wizard but very limited.
What we really need is to be able to select the people from the table that we want labels for.
I have added a true/false check box to the table called 'label?'
View 7 Replies
View Related
Apr 18, 2014
I have a form where I'd like to create a button to print labels from a labeling program called Label Matrix. I already have the label set up in Label Matrix to draw info from the Access table, and I know how to create a button. I can't figure out how I would make the button print the label.
View 5 Replies
View Related
Aug 5, 2013
I am using a cartesian query to create multiple copies of a record to use for printing labels.
Here's my query that produces the cartesian result:
SELECT tblCount.CountID, tblDeliveryOrders.DeliveryOrderNum, CurrentCY.Deliveryorderlineitemnum, CurrentCY.Quant, CurrentCY.UOM1, tblContainerSizeCodes.SizeCode, tblContainerTypeCodes.TypeCode, CurrentCY.WasteDescription, tblEtidDodaac.EtidDodaac, CurrentCY.ETIDDocNum, CurrentCY.Pounds, tblEPAWasteCodes.[EPAWasteCodes(1B)]
[Code] ....
This works just fine in creating the desired result - EXCEPT I don't get all the records.
When I remove the 'cartesian table', and right join everything, then I get the correct results. If I keep everything as-is and reintroduce the cartesian table, then I get an error about there being an ambiguous outer join.
View 3 Replies
View Related
