Reports :: Print Report Based On Filter From Navigation Form

Aug 7, 2013

I am using the Navigation form and I have a tab that has all the sales quotes for a particular salesperson. Because my salespeople like to work with paper I have created sub tabs which contain a report with the same information but filtered based as follows: this Month, this year, and Last year. This report needs to be printable based on the filtered information so I created a print button within the report however when clicked it prints the entire report not the filtered report.

The filter criteria is located in the navigation button, navigation where under the data properties. I have the on click event of the button set to open the report in print preview but I need to know how I filter the where in the macro to read the criteria from the active navigation button property?

View Replies


ADVERTISEMENT

Reports :: Print Report Based Upon Auto-number?

Sep 6, 2014

I need VBA code to print a report (rptLoadSheet) when the autonumber field (Auth Num) ends with a zero.

For example:

The autonumber is 99...no report.

The autonumber is 100...print the Load Sheet report.

View 3 Replies View Related

Reports :: Print Report Based On Input Parameter

Jul 2, 2015

I have to print a label quickly every time that the product hit the warehouse. The label has been created as a report linked to the query that will provide the info to the report. In order to make this report printing as quick as possible the idea is to scan the sample id from the product and once the label is printed scan the next sample and an on.

I'm not an expert on VBA but I have created the following scrip but the reports doesn't pop up.

Here is the code:

Dim SampleID As String
SampleID = InputBox("Enter Sample ID")
If SampleID > 0 Then
DoCmd.OpenReport "rptGRM_QuickPrintLabelDymo", acViewPreview, , "[Sample]=" & SampleID
Else
DoCmd.Close
End If
End Sub

View 8 Replies View Related

Forms :: Buttons In Navigation Form To Filter Report Data

Sep 23, 2014

I want to create a navigation form, or any form for that matter that has an embedded report. The report has data arranged by ClientID. I would like to create buttons down the left side of my form (why I thought a navigation form could work) where I can put the client name on the buttons and when I click them the report will filter to only show that clients data. I have client tables and the report data linked in queries, but just need to know how to get started with these buttons acting as ID sorters.

For example:
ClientID: 1 = Client: ABC Corp

In my report ClientID 1's data is grouped along with all other client ID's.

In my form I'd like buttons down the left side with ABC Corp written on it (followed by buttons for the other clients) and then when I click the ABC Corp button only ABC Corp's data shows on the page from the embedded report...

View 3 Replies View Related

Reports :: Filter Report Based On Text Box

May 26, 2015

I have a database which have tbl1 with field admission year with data like august/2007, august/2008. i have entered all data with form1. My problem is that i want filter report. user click a button so a form opened and than he entered data in a text box like august/2007 when he click on show report button only those pages which have august/2007 text will display in report. second time when user change text like august/2008 in text box report also show changes.

View 5 Replies View Related

Reports :: Unbound Report - Print Preview OK But None Of Fields Print When Report Directly Send To Printer

May 25, 2013

I have an unbound form with an associated report. When the user hits the 'print' button on the form/screen, the report is launched in the background. In the On Load event of the report I populate the report fields from the forms field as so:

Code:
Me.txtAddrMainLine2 = "NAME " & UCase([Forms]![frm_OrderRx].[txtPatientName])

This works like a charm as long as I call the report in Print Preview mode (i.e. with acViewPreview). But if I send the report directly to the printer, none of the fields print.

I've read about using other report events to populate the fields (e.g., On Format and On Print) and also something about using TempVars to pass the data. But I haven't read anything that's clear and definitive about the full answer.

View 3 Replies View Related

Reports :: Filter A Report Based On Values In Some Comboboxes

Aug 17, 2015

I am quite new to Access and have been working with a sample DB from Microsoft. I have been looking for some ways to filter a report based on the values in some comboboxes, and have followed the instructions on a website (can't post link yet).

I also looked at this file (**can't post link yet**) and it seems like everything works fine here. So I started a new DB with my own table, and tried to do the same thing as in this file.

Everything works fine.

But when I try all these steps in my own DB (the sample DB from Microsoft), it doesn't work.

When I filter by "Status" (f.ex: "In Progress" or "Not Started"), it seems to work fine.

However, when I filter by "Assigned To", I get the following error message: "Data Type Mismatch in criteria expression". So I googled this error message , but this field has nothing to do with any date formatting.

It gets even stranger when I try to filter by "Project":

Then a new pop up appears and asks me to enter the "Project".

No matter what I enter, the report turns blank

View 14 Replies View Related

Reports :: Filter A Report Based On More Than One Possibility In Same Field

Mar 12, 2013

I am trying to create a report that filters out certain records in a look-up field.

The field is called "program status", and the options are:
Housed
Evicted/Un-housed
Grad
GRAI
Closed

I want the report to display only records that are classified as "Housed" or "Evicted/Un-housed". Additionally, I'd like to be able to create a second report with only the Grad, GRAI, and Closed records.

View 2 Replies View Related

Reports :: Print Only Report Matching Current Record In Form Among Multiple Reports

Oct 2, 2013

I have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.

1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)

2. If user presses the Print button before pressing Save button then system should prompt user.

Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):

Private bSaveClicked As Boolean
Private Sub Form_BeforeUpdate(Cancel As Integer)
If Not bSaveClicked Then
MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation
Cancel = True

[code]...

View 5 Replies View Related

Reports :: Access 2003 - Filter Report Based On Combo Box

Feb 3, 2015

My Access 2003 Database contains the following objects:

1. tblTrackerData
- this contains over 1,000 student enrollment records.
One of the fields "QualCourseName" (text) contains the name of the Training Course that the student has enrolled in.

2. qryCourseNamesGrouped is a query based upon the above table with one field only - QualCourseName. This includes the names of the training courses and has been grouped so that only 17 training courses appear, not over 1,000.

3. frmParameter is a form that includes a combo box cboFiltered based on the above query AND a command button CmdFiltered to open a report rptCourseNamesGrouped and filter the report based on the selection made from the combo box.

I have added the following code to the OnClick event attached to the cmd button"
================================================== ======

Private Sub cboFiltered_Click()
On Error GoTo Err_cboFiltered_Click
Dim stDocName As String

[Code].....

When I click on the cmd button, the entire report is opened, instead of the selection that I made in the dropdown list.

View 2 Replies View Related

Reports :: Navigation Form - Passing Query Parameters To A Report

Aug 4, 2014

I have a navigation form that will have 6-8 tabs. We were using about that many databases, but we are finally consolidating them into one. The result of us using so many databases has been the multitude of forms and reports that were necessary for each database prior to merging them together.

The problem: There will be anywhere from 12-20 (text boxes) that the user can use to search anything in our database. What we need to have happen, if possible, is for those search parameters to show up in the header of our report if they have text in them. If the text box is blank, it should not show up in the header of the report.

I have read how to to do the start/end date technique, but I do not know if that would work for what we are doing since the boxes would only show up if they are populated by the user.

View 4 Replies View Related

Reports :: Print From A Form To A Report?

Jul 21, 2015

I am trying to print from a form to a report. The problem I am running into is I am getting a long report and I have discovered I have basically the same number of pages in my report as I have entries in my subform. If I have one entry in my subform I get a 1 page report. If I have 2 entries in my subform, I get 2 pages in my report and they look exactly the same. What am I doing wrong?

View 2 Replies View Related

Forms :: View / Print Reports Based On A Field In Form

Jul 23, 2015

I am working on a DB that will have multiple reports available. What I would like to do is to have a form that lists the reports available from a reports table. In other words, each detail line of the form will contain a report. I would like to have a button or link placed in the detail line that will open the report for that detail line when it is clicked. This will keep me from having to add a new line to a static form every time I add a report.

I have tried the DoCmd.OpenReport command, but it requires a report name, and I can't find where you can place a field name variable in the command line. I have tried other things I have seen here, but none have done the trick.

View 3 Replies View Related

Print Report From Form Based On Multiple Criteria?

Nov 17, 2006

Hi,

I have the following code which i found on another thread on this forum (thanks to original author) which is attached to the On Click of a button which prints the report corresponding to the details displayed in the form.

Dim strCriterion As String
Dim strMsg As String, strTitle As String
Dim intStyle As Integer

If IsNull(Me![ReferenceNumber]) Then

strMsg = "You cannot print a Blank Form!!."
strTitle = "Print Error"
intStyle = vbOKOnly
MsgBox strMsg, intStyle, strTitle

Exit Sub
End If

If Me.Dirty Then
Me.Dirty = False
End If

strCriterion = "[ReferenceNumber]=" & Me![ReferenceNumber]
DoCmd.OpenReport "DoC Certificate", acViewNormal, , strCriterion

This works fine, however, i need to be able to select the report based on more than 1 criteria. For example, the Reference Number can be repeated but is distinguishable from each other by an Issue Number i.e. ReferenceNumber = 93, Issue 1 or 2 etc. At present when i run the above it prints all versions of, in this case, reference number 93, which given that each report is only a single page isn't a show-stopper but it would be nice to have it working as i would like.

I have tried adding to the strCriterion line such as strCriterion = "[ReferenceNumber]=" & Me![ReferenceNumber] and "[IssueNumber]=" & Me![IssueNumber] but no joy. I have tried bracketing the whole line and variations thereof, again no joy.

Can anybody tell if what i am attempting to do is possible and if so how do i go about it?

I have tried the above coding using MasterID which is the Autonumber PK but it produces an "Enter Parameter Value" box for MasterID. Obvioulsy if i can get it to work for the Autonumber then my problem goes away but i can't seem to figure out why it works for Reference Number (Number) and not MasterId (Autonumber)?

Regards

Alan

View 5 Replies View Related

Reports :: Print Calculated Field Off Of Form To A Report?

Jul 18, 2013

Basically i have a form where i get info from multiple tables. On the main form itself i have 3 calculated fields for hours where i add all the hours i choose (from a subform) onto the main form.

My issue is i can create a query to come up with all the fields for my report, but how do i get the calculated fields on my main form on the report? Is there a way to print the calculated fields on the main form to a report? or do i have to do the same calculations on the report itself?

View 4 Replies View Related

Reports :: Table Locked When Trying To Print Single Report From Form

Jul 9, 2013

I have a database that has all the employees in my company with basic information. I have a auto number set up for each person. I also have on my form a subform with information about the employee's history in the company. I have bin trying for the last couple weeks, to put a button on my form, that will open up the custom report I made for the one employee, in print preview mode. Everything I have tried gives me a error. The main error I get is The database engine could not lock the table "EmployeeT" because it is already in use by another person or process. If I open the report by itself, then I get all my employees. I am looking to just open a single report from the form I am currently looking at.

I have 2 tables. One Named EmployeeT with all the employees basic information. I have a auto number with the field name EmployeeID.

The 2nd table is called IncidentT, which has its own auto number, and records all the problem/incidents with the employee. For example, lates, if the did not show up, or cancelled out of that day, etc. I have the 2 tables sharing the EmployeeID, sharing the relationship. My main form, has a lot of my information and a subform, Like i said. But no matter what I try I can get rid of that error.

The only way I got it to work without the error, is when I go into properties and change the Record Set Type to Snapshot on both the form and subform. But then I can't edit the form or subform anymore.

View 2 Replies View Related

General :: Button To Print A Report Based On Text Box Values On Form

Jul 11, 2015

Im using a button to print a report based on a text box values on the form.the code for which is below

Code:

Private Sub SaveBtn_Click()
DoCmd.SetWarnings False
DoCmd.RunSQL "Update BookInTable SET DateBookedOut = '" & Me!DateTxt & "' WHERE BarCode ='" & Me![BarTxt] & "'"
DoCmd.RunSQL "Update BookInTable SET BookedOut = True WHERE BarCode ='" & Me![BarTxt] & "'"
DoCmd.OpenReport "Labels", acViewNormal
DoCmd.PrintOut , , , , 1
DoCmd.Close acReport, "Labels", acSaveNo
DoCmd.SetWarnings True
End Sub

The problem that I am getting is not only is the label printing but so is the form.

View 3 Replies View Related

Reports :: Filter Report From Certain Selections In Form

Jul 30, 2013

My problem I am having is that in my database you can click around to different customers info on forms and from there you can click on a button to get to another form that lists all of the customers vehicles. From there I have a billing report that I created and I am trying to filter the report to get what I want on there.

I have been searching around and have found codes to filter reports so that right now I have it when I click on Billing Report it filters by the customers form i am on. But now where i am having some issues is that I am also looking to filter by a yes/no field so that anything clicked yes for that customer will be filtered to show on this report.

View 2 Replies View Related

Reports :: Using A Form To Filter Info On Report

Jul 24, 2013

I am using a form to filter information so that I can open a report. The report displays information pertaining job costs. Each month the company I work for records their labor, costs, and travel in a form with a year to date amount. Right now, I am having a problem opening up a report for one specific job and a specific month. So what I want the dialogue box to do is to pick from a list of jobs then pick from a list of months, click a button that prompts a preview of the report.

View 14 Replies View Related

Reports :: Filter Report From Listbox On Form

Oct 24, 2013

I have a report based on a query, the report loads filter based on dates input to the query from Form1 when report loads. I want to filter this report further from a listbox on form2, but I want the listbox rowsource to populate based on a field in the loaded report. Is this possible?

View 2 Replies View Related

Reports :: Print Or Preview Reports Based On Selected Value In List Or Combobox

Jul 11, 2013

I am still trying to get a hang of development in access 2010.

I would like to design a form with a listbox or a combobox which holds all 8 of my reports (a table has all the reports), with a Print and a Preview view buttons. In addition, the user must be able to select if they want to view the report by month, quarter and the year in question.

How do i have a specific report print or previewed based on the value selected in the listbox or combobox and the date criteria.

View 4 Replies View Related

Reports :: Filter Multiple Fields In A Report Using Comboboxes In A Form?

Jul 24, 2015

I have a report based on a query that I put inside a form. What I want to do is create 4 comboboxes from which users can choose options that will filter the report without leaving the form or opening the report in a separate window. Also, I want to make the filters dependent on each other, meaning if a select option A on combobox 1, the options i will select on combobox 2 will only be based on the earlier filter on combobox 1 ...

So far I'm able to do at least 2 of the comboboxes to filter the report, but they aren't based on which one was used to filter the report first. So if i filter the records by choosing option A on combobox 1, combobox 2 will still filter every record.

here's my 2 codes so far:

Private Sub cboLocation_AfterUpdate()
On Error GoTo Proc_Error
If IsNull(Me.cboLocation) Then
Me.qrySalesByLocation.Report.Filter = ""
Me.qrySalesByLocation.Report.FilterOn = False
Me.qrySalesByLocation.Report.Requery

[code]....

the other 2 comboboxes, I can't apply the same code cause the enter parameter dialog keeps popping out.

View 3 Replies View Related

Reports :: Using Command Button In A Form To Filter And Open A Report?

Jun 26, 2014

I'm trying to use a command button in a form to filter and open a report. I am able to get it to open the report, but I cannot get it to filter the report based on a combobox in the form. I've tried every combination of code I could think of and find. Here is what I currently have:

Code:
Private Sub FilterReport_Click()
DoCmd.OpenReport "Report", acViewReport, "First Name='" & Me.FName & "'"
End Sub

Code:
Option Compare Database
Private Sub Report_Open(Cancel As Integer)
Me.RecordSource = Me.FName
End Sub

"FilterReport" = Form Button
"Report" = Report
"First Name" = Report Field
"FName" = Form Combo Box

View 14 Replies View Related

Reports :: Print Two Different Formats Based Upon Value Of A Field

Dec 20, 2013

FoodStamps This is a YES/NO field (printed in the first or second columns).FSAmount This is a numeric field(always printed in the third column).I have a preprint form with three columns.The first column is for a YES answer and I want to print YES if FoodStamps is TRUE.The second column is for a NO answer and I want to print NO if the FoodStamps is False.The third column is either blank if the first column is YES or the actual value if the second column is a NO

Two cases:

If FoodStamps is TRUE then print

YES Blanks
I have a preprinted form and I want the YES in the first column and blanks in the third column on the form regardless of what is in the fieldFSAmount

If FoodStamps is False then print
NO value in FSAmount

the NO in the second column and the value of what is in the FSAmount field printed in the third column.I tried to figure it out with conditional formatting with no luck.

View 1 Replies View Related

Reports :: Printing Report Based On Filtered Results Of Form

Jun 26, 2013

I am trying to print a report based on the filtered results of a form where the data record source is generated from a query. What I have is five unbound comboboxes on a form that filter the results of the query on a subform which works fine in whichever combination I set, I then want the report to print out the results of the filter and the filter combination that I used - basically exactly as it appears on the form (I have used the same query / subform in the report with text boxes to show the filters used on the form). My VBA skills are quite limited (but improving!) and I have trawled the web trying different code examples but can't seem to get it nailed. Current filter code follows;

Code:
Option Compare Database
Option Explicit
Private Sub PrntConfigReport_Click()

[Code].....

View 3 Replies View Related

Reports :: Sort Report Based On Option Group On Form

Oct 9, 2014

I have created a form with an option group with 4 options (date, line, description and observation). Each of these options are to be a sort order for a report that will open after the user selects an option and clicks a button. I am trying to code the button using a select case so that case 1 opens the report sorted by date, case 2 by line, etc. how to write the code for the sorting.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved