I have a report where the detail section, holding 4 subreports, takes up 5 inches in the middle of the page between the header and footer. We want the entire 5 x 8 area enclosed in a box on every page. I have tried to achieve this by putting a line in the Detail_Format section:
Code: boxDetail.Height = 5 * 1440 * Pages
However, when I run the report, I get pages 1/3 correctly, then 2/3 and 3/3 with no detail section or box, and then pages 4/3, 5/3, and 6/3 with blank detail sections and no box. If it's a 1-page report, the same - page 1/1 is perfect and page 2/1 is blank, no data and no box. I also sometimes (but not always) get overflow errors from the Detail_Format event.
I know it's not a margin error because that would be every other page, and the page count wouldn't be doing that. (Still, I have scrupulously checked every margin, and they all look fine.) Getting this look on the report is a priority. Any way to achieve the same result with the box without causing the missing data and extra pages?
I've got a report, which on the screen is three chrts and a page break in between. Page is set up to print landscape.
When I print the report or save to pdf it adds a lot of pages in between 2 and 3. It seems to be of chart no.2 getting smaller and smaller. I've attached a copy of the pdf so you can see what I mean.
When I print reports, Access is printing 2 pages per sheet, making the text VERY small. However, EVERY setting that I can find, whether the main printer setup or the Access program itself, shows that it's supposed to print only ONE per page.
The only program that this occurs with is Access. Is there a setting somewhere that I'm missing? Thanks.
I've been asked to make sure only certain users in my database are able to print anything (i.e. Administrators). Is there any option/property to do this?
I have already built in User Access controls using the ctl.Tag property. The only way I can think off the top of my head is when a 'general user' uses it, to ensure that every control is displayed 'on screen only'. This of course doesn't stop them printing - just makes them print blank pages!
I was having trouble just setting each report with a particular print method - for some reason they just kept forgetting their individual settings and resorting to default on the machine.
This meant reports were printing on the wrong paper, or the wrong size paper, the wrong orientation and some times refusing to print if it couldn't find the paper (which is useful in runtime as it doesn't display error messages)
So I used Reports(rpt).printer properties (I forgot where I found this) to hard code the printer properties into each print command... this meant I had to use another function to insert the variables.
So all I had to do was say:
Code: PrintMe("Invoice","InvoiceID",iID)
and a report would print to exactly how I wanted... but it's just too slow!
See attached for full code, I have a niggling feeling it may be the function: PrinterOK, to make sure the printer exists or not.
Code: Function PrinterOK(sPrinterName As String) As Boolean Dim MyPrinter As Printer PrinterOK = False For Each MyPrinter In Printers If MyPrinter.DeviceName = sPrinterName Then PrinterOK = True Exit Function End If Next End Function
I know it's the printing code, because if I stop the printing and just preview then it shows up almost instantly.
Does anyone know if there is a way to setup a button on a form that when pressed, will print to a specific printer (that's not the default)? For example, I have one button on my form that prints 2 copies to the default printer, then I want the other button on the form to print on another department's printer.
i've created a database for city permits to be issued (which works perfectly thanx to alll your help), but now i need to be able to print out 1 permit at a time when it is issued (immediately after the data has been entered into the forms). i have 3 tables & 3 forms: contractors/owners, permtOrders (which has tabs for the different types of permits), and permitOrderDetails. the problem is the forms are set up for data entry (and only open in add mode for obvious reasons)...i need to be able to print an actual permit (like the carbon copy, landscape kind that usually tears out of a book). once the user enters the information into the forms, i need a little bit of that info from each form to be carried onto the actual printable permit. i'm not really sure how to accomplish this. :confused: i don't really know if i explained this right, but any suggestions are greatly appreciated.
I have created a from containing names and address. On This form I have a checkbox called "MailLetter" and a command button called "Sendletter".
I place a check in the box corresponding to specific people, then using a command button a letter is printed to ONLY THOSE WHO ARE CHECKED.
The letter is a Word document that resides on the desktop.
Here is the code behind a command button to print. Not sure if it is correct:
Private Sub Command2600_Click() Dim WordObj Set WordObj = CreateObject("Word.Application") WordObj.Visible = True WordObj.documents.Open "C:Documents and SettingsUserDesktopLetter.doc" End Sub
I assume this can be done through some sort of mail merge?
I have already created a summary report that is one page long, however, every time I view my report in report view, export to PDF or print, the report has duplicate copies! Not blank pages. Just duplicate copies of my one page. The report is generating hundreds (about 700) of the same exact page. How do I force my report to have just one page.
These days more and more of my databases are wanting to be accessed via the web as well as from MS Acess. I guess this is the norm these days but in most of our (office) dbs it's just 'web for web's sake' and there is no real need to access it outside of Ms Access.
Bu hey that's what they want...
Problem with one such db is that a lot of the fields are memo fields and hold a LOT of text and they want to create MS Access reports/PDFs as well as have nicely formatted html for the text on the web pages.
I seem to be able to cater for one or the other but not both.
1. I can leave the memo fields as raw text and the reports/PDFs look fine with the report formatting, but on the web page there is no formatting and the text ends up in one block paragraph with no formatting.
2. Use a html control for the hmemo fields and store all the html tags within it. The web page looks nicely formatted but the html tags will show up in the PDFs!
I've tried various tag stripping tools but they seem to give unpredictable results.
I also don't want to just dump the PDFs on the web, as they will be static and it's just plain lazy! (too many unnecessary PDFs on the web IMO)
I have a form that looks and prints exactly as I want it to, except for two little things. These things are extra pages. They don't appear on the print preview, but they always show up on the printer and on the pdf file when I email it. One page is blank and the last page has "Page 1 of 1" at the bottom right corner of the page. I would always limiting the printing to one page.
I have a DB with all my patients and (among other things) all their referral source.
I would like to print a status report of all my patients, grouped by the referral source, and fax them to the appropriate offices. Easily done with the report wizard.
What I need to know is, how do I create one report, but force a new page for each referral source?
My records are huge, with 2 memo fields. One memo field has the complete content of journal articles, so it's quite a lot of text. What I'd like to do is, per the title, split record data into 2 report pages each with the first page holding the summary field data and the second page holding the journal content only.
I've experimented with the page break functions, can grow / can shrink properties and some of the other things that would be relevant here but can never seem to get them to work.
I'm working with getting a 3 page report to print/create PDF of the 3 pages. Right now I have the formatting set up for the 3 pages but each is an individual report.Is there a way to combine the reports into a single report? I've been messing around with subreports but can't get it to display correctly.
I have a report I want to generate in Access 2010. I have a text box with the following:
Code:
="Page " & [Page] & " of " & ([Pages]+[Forms]![ReportForm]![PageCount])
What I am attempting to do is increase the maximum number for the total number of pages in the report. As it reads right now when I go into print preview it looks like
"Page 1 of " That is all. It doesn't seem to calculate the new total number of pages. Yes the report form is open, and yes there is value in the PageCount in the Report Form.I had this working in another database, but this one isn't being as nice. The reason for adding to the total page count is because additional pages will be added to the report that aren't in the database. how to increase the total number of pages in the report.
I was able to create only 3 pages in access report. I am not able to go beyond 3 pages since the page footer is not moving down, means I am not able to drag it down.
It is a simple report of resume with only text boxes. My report comes around 10 pages.
Send only one or two pages of a multi-page report. I have a report that has three pages. I only want to send the first two as a pdf file. Can this be done with VBA? I know it can be done using Exporting Data on the External Data ribbon, but how can I do it via VBA?
Have a generic dashboard report with multiple charts in it. One in particular is a bar chart, but depending on what the dashboard is produced for, the bar chart may have too many bars in it to make it legible. Therefore I'd like to conditionally determine the number of bars (basically the number of records in the query) and then make the chart go from one page and continue onto another.
Currently I have five separate reports setup in Access 2010 (that are running off of five separate queries). Since they have different data/fields, I was unable to combine into one query & one report.
However, I print each to PDF and then combine using Acrobat Pro. Is there a way to combine in VBA and not have to do the step using Acrobat Pro?Function PrintReports()
I have set up a report in Access. However, when I look at it in print preview, I get the message that the section width is greater than the page width, and that some pages will be blank. It is obvious that the Detail Section is the issue, but I can't figure out how to reduce the section width. The detail section only contains a few text boxes that are well within the margins of the other sections.
How do I adjust the section width so there won't be any blank pages?
I can not get my Access Report to give me a total number of pages by group. I've been able to have it give the correct page number per group but not the total number of pages in each group. I've looked at the threads and it appears that in order to get this, you must do a 2 part pass. 1st to get the page number and then to get the total papers per group.
I've used the code supplied and when I do a print preview, I get the message that it can not find the control, Me!ctlGrpPages. This is the control I created and placed in my page footer section of the report. I've also seen numerous references to the report, "Employee Sales by Country" in the Northwind database. I downloaded the database but could not find this report in the database.
