Reports :: Removing Small Value Data Labels In Stacked Bar Chart
Jan 23, 2014
I would like to remove small value datalabels in a stacked column barchat.
If you look at the image attached, the small value datalabels tend to clutter the image.
My graph is a MSGraph.Chart.8 inside a Report.
I am working with Access 2010.
Looks like the only possibility to remove the small values is to do that programmaticaly in VBA.
I would like a method that I could call with two parameters : graphname and a threshold value as of which small value datalabels are not displayed.
View Replies
ADVERTISEMENT
Mar 12, 2014
I am using Access 2007-2010 and I was able to create a report but now I want to include a stacked bar in it.
My report shows one record at a time, so the values for my chart change accordingly. The chart should have four columns: Student, Homemaker, Retired, Employed I have assigned a colour for each category in "Edit" mode (by clicking separately on each column). However, sometimes the results don't show all four values and then my stacked chart only has 3 categories, but I would like it to show the missing category and just have value as 0. But most importantly the colours get all messed up. Can I permanently assign a color for each column?
Also the order is not how I want it to show. Right now it's in alpha order..how can i customize the order of the columns?
I tried doing this in datasheet - saved; but when I switch to a report view - everything changes back...
View 1 Replies
View Related
Dec 16, 2005
I'm in the middle of doing a huge survey at work. The end resut will be a report which reflects the survey answers as graphs.
The graph part I have down. There will be one graph for each question. Within each graph are three groupings: Classified, Management, Certificated. Within the groupings you will see at least three bars where each bar represents a grouping of answers.
Example: the classified grouping may have 2 bars. One bar represents 16 classified people who said "Agree" to question 11 and the other bar represents 5 classified people who said "Disagree" to question 11.
...ok, so now I have all that, but I have to have data labels on the graph. I can do that, I know where to click, but unfortunately it comes up as the actual number of people who responded this particular way (agree, disagree, etc.) and I need the data label to show up as a percentage.
Where do I make the change so that it shows the percentage of 16 classified out of 21 who said "Agree"?
Hopefully it's not too confusing. Thanks!
View 2 Replies
View Related
Jul 30, 2007
I have large sets of data that has labels on them. For example "25.56 lbs". I just want the raw numbers. Can someone help with what to type in the update to field of an update query to just keep the numbers? Thanks
View 2 Replies
View Related
Apr 7, 2008
before i pull out any more of my hair, I am making a pie chart and the "Best Fit" function in access charts for form flat out doesnt work. Does anyone have any suggestions on how to get these labels from bunching up?
View 3 Replies
View Related
Jan 14, 2013
I have data in a chart over four groups that are just labeled A, B, C and D in the underlying data. The table wants to label the x-axis of the chart SumOfA, SumOfB, SumOfC, and SumOfD. Ideally I would like to drive these labels by text boxes on a form, but I can't even figure out how to change them manually. I got to the data table in the chart designer and changed them there, and they'd show as changed in design view, but then they weren't changed in report view.
View 5 Replies
View Related
Aug 27, 2014
I am working on a project that is requiring me to hide a subreport that happens to be chart graph, when the chart has no data and my problem is that I cannot seem to get the report to properly hide and show the label behind it when the data is not there. I am in need of a SQL code that will read my blank record source as a zero instead of blank. I have tried Nz, IsEmpty, and IsNull and none of them seem to work.Here is the current SQL code:
SELECT DISTINCTROW Sum(Case_review.ID) AS SumOfID
FROM Case_review
WHERE (((Case_review.[Type of Issue].Value)="Clinical"));
Here is the current VBA code (which is in event on load) for the main report:
If Me.Rpt_Clinical.Report.HasData = -1 Then
Me.Label29.Visible = False
Me.Rpt_Clinical.Visible = True
Else
Me.Label29.Visible = True
Me.Rpt_Clinical.Visible = False
View 7 Replies
View Related
Jun 16, 2015
I have a (simplified) table with productnr., period (year and month) of sales, and sales (in currency). Now I want to know the contribution of the products that have their period of sales after a certain number. This will calculate the contribution to sales of new products. Simple stuff.. (i hope), but I was not able to do so...
I have managed to separate the table with multiple queries and I have managed to have now to queries that can show the sales of products that have been launched before the date and after the date, but combining the two tables is impossible for me..
View 14 Replies
View Related
Aug 27, 2014
How do I change the legend labels of a pivot chart form so that it doesn't show the words "sum of" in front of my description. I am using access 2007.
View 2 Replies
View Related
May 18, 2014
I have a small clinic database. I've got tblAppointments to show AppointmentID and AppointmentDate among various other data, but only the dates matter for what I'm trying to achieve.
I'm trying to show a chart on a report that shows the number of appointments by months for this year and previous year. How can I do this...without using SQL, hopefully?
Here's what I tried: I made a cross-tab query to successfully show the years 2013 and 2014 in the rows, months in the columns, and number of appointments as values. But then, I didn't know how to graph it to compare the number of appointments for the two years by months.
View 5 Replies
View Related
Jul 22, 2013
I have created a chart report, but for some reasons, it only shows Sample data (East, West, North, 1st Qtr, 2nd Qtr, 3th Qtr, 4th Qtr etc). It is in Design View. If I do Print Preview, it looks fine.
How to have the Chart properly displayed in Design View?
View 4 Replies
View Related
Jun 15, 2015
I am editing a database that provides the option of creating custom reports, where the user can input a date range of their choice and receive aggregate data for that time frame. Although all of the numbers in the report are correct, I am having trouble with a chart that I inserted into the report.
Specifically, if the date range requested spans 2 calendar years (i.e. April 2014 through January 2015), the data for January 2015 appears at the beginning of the year (so the chart x-axis is for Jan through Dec, and the Jan 2015 data is showing up in Jan (as if it was 2014, not the end of the given range in 2015). When I try with smaller time frames within a calendar year, it adjusts just fine (i.e. shrinking the window so just March-May is displayed on the graph).
How to adjust the axis so that it properly records the data range- so that it would start the axis with April and end in January, for example?
View 2 Replies
View Related
Dec 17, 2004
Hi,
I have a command button that opens a report. The report has many subforms in it. I am sending open args which existingstewardship. I want one of the labels of the labels to be visible if the me.openargs = "existingstewardship". the code is not working. I have tried to debug when I do this I have found the open args are null and I am wondering if the open args are null is this because they were sent to the main report from the command button and the subforms in the main report do not get passed the open args.
Does anyone have any idea ? how I could make the box visible or not visible in subreport from the command button. The other option I have would be two different reports. Thanks PWF
View 1 Replies
View Related
Feb 12, 2014
1Create a report called rptCustomersByGender. The report should:
a.Print your company's name at the top of the first page only
b.Print your data labels at the top of each page
c.Group your data by gender
d.Display all the customer information in the detail section
e.The customers should display in ascending numerical order by Last Name
f.Below the list of Female customers, it should say: "Total number of Female Customers:" and then the total number of female customers should display. Do the same for the male customers
g.The page number should display at the bottom of every page
h.The list of Female and Male customers should each print starting on a separate page.
i.Make sure the report runs without producing any errors and looks professional.
I created a report and grouped it by gender but I can't do step F. creating two different labels for each group..
View 1 Replies
View Related
Sep 2, 2014
Is there a way of removing all these rotten 'layout' groups in one hit and just being able to shift all the fields about individually as I used to do. I have worked out how to be rid of them individually, but a single click to say remove from report and all sub-reports would be great. I do get rather fed up with Microsoft's presumption that we need all this stuff by default, surely they provided a way to turn off all this un-necessary 'default' functionality?
View 3 Replies
View Related
Nov 24, 2004
I have created a report to display a bill of materials (boms). The report works as I have designed. I have also figured out how to filter the report using the docmd.openreport vbasic call with filters. This works fine. I use a form to select the filtering I need in the form of 2 Listboxes populated from tables. The form opens, the report generates and displays in preview mode. What I cannot do is the change the title text (Text Label on the report Header). I would like to use the selected items in the listboxes as sources of text for these controls on the report so I can use the report over and over for different boms. ANy help would be greatly appreciated! Vbasic I hope!
View 1 Replies
View Related
Jun 11, 2013
I've created labels in my database and when I print them on a label printer, I get a blank label in between my printed labels. I've checked the printer settings and properties and can't find anything. I've also checked the database properties and can't find anything. Is there something in the database that I'm missing?
View 6 Replies
View Related
Dec 9, 2013
I currently have a set of labels that works flawlessly - it has 2 columns and 20 rows. I have a form that I can select which label to start printing on so I use up a full sheet with no waste. [working labels attachment]
The labels I'm trying to print on now are 1.25" x 10", as seen HERE. Since I cannot rotate the whole report 90 degrees, I set up the labels to have one column with six rows instead of 6 columns with one row (landscape instead of portrait).
I copied the entire label printing process from the known working report. For my new set of labels, the label prints great if I have just one record, and/or I start at label #1. If I want to start at label #6, it just prints slightly lower on the page instead of at label #6 position (which is the bottom of the page). [label at #6 position attachment].
View 5 Replies
View Related
Jul 11, 2015
I am having a problem setting the margins to print labels in access. I go to page setup and change the margin size click ok and nothing happens to the label and when I go back to page setup the margins have returned to their original values. I have already selected the label printer and labels that im using.So im baffled as to why it wont accept margin values that don't cause the label to be printed over 3 labels.
View 1 Replies
View Related
Oct 18, 2011
I have a small receiving inspection database that prints lables for each item received. However when they use the program on a different computer the lables do not print on the lable printer at that location.
View 1 Replies
View Related
Jul 18, 2013
I am making labels to stick on containers that we're shipping out. Some shipments will have only 1 container and some will have more than 1.Can I have it repeat a label if there are more than 1 container for an order?
For example:
Shipment 1 has 3 containers. The label says "3 x DM" and it will make one label.
Can I set it somehow to print that label three times? What about adding incremental text, e.g. 1 of 3, 2 of 3, 3 of 3?
View 12 Replies
View Related
Jul 22, 2014
I am printing invoices and need to print the label in a subreport at the end of each customer only once. This is what I want it to look like:
2014 payments applied to cap: GA $8,078.00
NC $1463.00
SC $155.00
NOT
2014 payments applied to cap: GA $8078.00
2014 payments applied to cap: NC $1463.00
2014 payments applied to cap: SC $155.00
I use ACCESS, but I do not know SQL. .
View 5 Replies
View Related
Jun 10, 2013
I have a report that should print on labels ready to be stick on a book, but how can I tell the report to start from 3th row 2nd column so I do not waste any labels?
View 4 Replies
View Related
Dec 2, 2014
I am trying to insert data into a table through a combo on a form. Originally, I had the text field size set at 15 characters, but the data I wanted to enter changed to 25 characters in length, so I changed the field size to 25. I then got the following message:
"The field is too small to accept the amount of data you attempted to add. Try inserting or pasting less data."I increased the size, but still got the message. I even took the size right up to 100, but still got the message!
View 6 Replies
View Related
Aug 13, 2015
I have a non standard size report (for printing labels)
The report is just over 10cm wide and just over 15cm deep.
I have solved the blank pages caused by exceeding the width but I'm still getting a blank page when I move some data down. I am still within 15 cm but it's throwing me a blank page. Even if I extend the in design mode depth to say 20cm (ie the height in Detail) it's throwing a blank page (I can see this in print preview).
I initially set up the report (it's a long time ago so memory fades) using the label wizard setting up a label 4*6 inches (10.16 * 15.24 cms) and it is this i'm trying to tweak. Is there a property I'm missing somewhere?
View 5 Replies
View Related
Jan 12, 2015
I have always noticed that when creating a report, when you make a paragraph using a label, the alignment and size of the text/paragraph is always different when you preview the report than when you design it.
This makes alignment of paragraphs tricky, especially when you are trying to insert a bold faced word into the middle of a block of text by using a separate label.
I am using Access 2000
View 4 Replies
View Related
