Any way to repeat the Report Header on every page?
I had my header in the Page Header so that it would repeat on every page, but it did not have the CanShrink option so I put it in the Report Header so it shrinks when I want it to, but now it doesn't repeat. I was hoping there was some kind of code I could implement that would let me repeat the Report Header on every page.
Or is there a way that I could get the CanShrink property in the Page Header?
I have a report, a phone list, which has two columns, see the attached file for a screen shot.
The Employee Name, Mobile Phone and Desk Phone text is in the "Page Header". The Data fields that retrieve from the table are in the "Detail" section. The whole report is 8.89cm wide. The two columns fit perfectly across a portrait A4 sheet.
When I run the report to Print Preview, I get the two columns fine, but the Employee Name, Mobile Phone and Desk Phone text doesn't repeat at the top of the second column. Is there some way of achieving this? I want the part I have circled in RED to appear over the top of the second column as well.
I would have thought there would be a simple check box somehwere that would be something like : "Repeat Page Header on multiple columns", or something as equally useful. Strange that this is so difficult to do, as am sure that this sort of thing is something that lots of people would want to do?
If I have a report and it has controls (labels representing column titles) in the page header. Now when I print the report - if it happens that the last page has no detail records - but there is text boxes and so forth in the report footer. Is there a way to not display the page header on the last page?
I have a report where the last page shows the page header - and the field/column labels on the page header - but for which there is no detail records left to display - on the last page. There is report footer information that should display. It just looks weird because the field/column labels show at the top of the page - but there is no data remaining to print under them on that last page.
I have a report where I number pages based on the Store (muliple stores in report but page numbering resets when Store changes) I do this by manipulating the page number field on the report by code in the report sections to reset it and to increment it.
Code:
Private Sub GroupHeader0_Format(Cancel As Integer, FormatCount As Integer) Me!PageNum = 0 End Sub Private Sub PageFooter_Format(Cancel As Integer, FormatCount As Integer) Me!PageNum = Me!PageNum + 1 End Sub Private Sub ReportHeader_Format(Cancel As Integer, FormatCount As Integer) Me!PageNum = 0 End Sub
The report has a Page Header with various fields and labels and that's been fine however I've had a request to hide a field on subsequent pages (i.e. print it on the 1st page of each store then hide it).
So I added the following code to various sections, but can't get it to work correctly. The fields (label and text box) appear on Page 1 for the first store then get hidden but never return even though when I step through the code it is functioning 'correctly'. The GroupHeader code is performed but the fields don't get displayed on the report. I think is isn't re-painting that section but adding code to the Paint event does nothing, and in fact doesn't actually get run, so not sure when that event is triggered.
Code:
Private Sub GroupHeader0_Format(Cancel As Integer, FormatCount As Integer) Me!PageNum = 0 lblMemberNo.Visible = True MemberNo.Visible = True
I have a report that lists states and cities within the states. When a state name happens to be at the end of the page the individual cities appear on the next page with no State heading. I solved the second page problem by setting the "repeatSection = Yes" in the Section Header (though I haven't shown that in the example below).
But the previous page (which just shows the State Name and no cities looks dumb. Is there some sort of solution.?? (Actually I would also like any State that continues to a next page to not just have the state name but something like " Colorado (Continued)" Is there anything I can do in VB to make a page break if the section is going to print but therer isn't enough room for one detail line?
This is what I currently see
Alaska Ancorage Prudo Bay
California Whittier Anaheim
Colorado ------------------------Page Break --------------------------------- Denver Pueblo Colorado Springs
I cant get the report the way i want it anyway but basically i have a subreport header embedded in the Page Header of my report.I can see it in Report view but not in Print preview and it does not print of course!?
I have a database used for several product lines. Depending on the product line selected, I need to add an image to my report as the header for it. I need to store the images (there are only 3) in the database and cannot have an external link to them. Have been trying to figure out the best way to do this and I am finding both OLE Objects and Image Objects.
I have a report, rptAllCSCS which is based on a query qryCSCS2...
One of the fields in qryCSCS2 is Status and each record is either "Current" or "Not Current"...
My report is being viewed via a navigation form, so one of the tabs says CSCS and when clicked the user can see the report...
I have added a button in the report header which when clicked opens the report in print preview so the user can print the report. (Done with a macro in the On Click of the button.)
I would like to add a combo box cmbStatus which has the values "Current" and "All" in the report header. (Current will show only when the Status field = Current and All shows all records so Current and Not Current together). This will act as a filter for the user to see the corresponding records and they can then press the print button or just view on screen.
I haven't worked with filters before except when you specify the criteria in the query and point it to a control on a form which then opens the report... As this report is already open I'm having trouble, as well as specifying the "path" when something is in a navigation form being a bit tricky...
I can't get my reports' unbound field's to display the criteria parameter I enter when report is opened. I have done this before but not in Access 2010.
In my parameter, I do have a long string inside the brackets (e.g. =[Enter START Date "1/1/14" or Leave Ranges Blank to show ALL]). I am wondering if this or the quotes inside the brackets are causing it not to work.
I create several reports for several different companies. Report data is the same but the report header data changes based on the company selected. All works well until I attempted to add their individual logos. I have tried many of the suggested methods both here and elsewhere to set the image path in Image.picture and image.control source. But I get "windows can't open file". Access 2010 on Windows10 insists on using the insert picture window when i select an image control. There is a drop down in the property sheet. I've gotten it to work a couple times but then its gone after restart.
The header data comes from a table [Company] which has the fields - name, addr, phone, path to image, and active(yes/no)
I'm producing PDF reports in a VBA routine in Access through the DoCmd.OutputTo acOutputReport.
The routine works great, however i have now a new requirement and i need to change the report header so to if Country X is selected in a drop-down menu, then only image X is shown on the report header; if country Y is selected then only image Y is shown on report header.
I was simply thinking to make this through the "visible" option of the image, however it doesn't work because i get error "report must be open".
I have a main form (Parent) along with a subform(Children). I want to have a button that generates a report with the Parent information as a header and the items in the subform as details. In addition, I want the report to show only the children that were recently added not all of the children.
I'm using Access 2010.My reports are all crowding the left margin, with the reports printed in Landscape being the worst.My Page Setup shows Top and Bottom margins are 0.2 inches, Left is 0.35 and Right is 0.213.
Paper size is 8.5 x 11, in Landscape Mode.
1 column.
Column is 10.4"
I'm getting that error that says that the report is wider than the paper so I may get blank pages, but I don't. It just prints the 6 pages of the report.The Report Property Sheet says the report is 10.5104" and I cannot for the life of me get that to change.
When it prints, there is absolutely no margin on the left side (in landscape mode). When the report renders on the screen, it appears to be perfectly aligned.Reports printed in Portrait mode have extra white space at the top, with the footer being printed right along the bottom edge of the paper.
I have a report that is generating a few pages, but I am only interested in the first page only. I have tried adding in code to cancel everything after the first page, but this just gives me a blank second page:
Code:
Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer) Cancel = Me.Page > 1 End Sub Private Sub PageFooterSection_Format(Cancel As Integer, FormatCount As Integer) Cancel = Me.Page > 1 End Sub Private Sub PageHeaderSection_Format(Cancel As Integer, FormatCount As Integer) Cancel = Me.Page > 1 End Sub
I am outputting this report to PDF, and it is very annoying to have a blank page.
Is there a way to force the report to only be one page in length.
We recently converted to Access 2010 after using 2000. This problem has suddenly appeared. It doesn't happen on every report but there is one in particular right now and I can't figure it out.The first page of the report is complete but it prints a second page containing only the page header and footer, the rest blank. There are only 2 detail records on the first page and plenty of blank space.
It's not the issue of the page overflowing onto extra pages because the page size bleeds beyond the margins. Everything is safely inside the set margins, and in fact as a test I brought the page width down to 4 inches with .5" margins and it still prints a second page.
I am having a DB and a report is there from query now what i want is ;
if query fields are apple, bat, cat, dog, elephant and I want in report the first three fields like apple, bat, cat to be displayed at first page then remaining on next and so on. Whereas I have a proper report header and footer which I do not want to change for any page means will remain same for all pages..
I have a 14 page report in which I want the footer to appear only on the first page. I accomplish this with some code in the OnFormat event of the page footer:
If Page > 1 Then Me.PageFooter2.Visible = False Else Me.PageFooter2.Visible = True End If
The first page has the footer (great).
The 3rd thru the 14th page does not (great).
The 2nd page also doesn't have the footer - but - it only shows a half page of data! The data continues where it left off on the third page!
So, to sum up:
1st Page: Footer with detail section containing 16 rows of data.
3rd thru 14th Page: No footer section with 28 rows of data.
I have a complicated report in which there is a main report which contains other reports within it. One of these reports (call it "Number Six") within the main report has several subreports. Within this report, I can successfully cancel the subreports so that they do not print if the data does not match the right criteria. I use VBA code to cancel the Number Six report if none of the subreports will be printing. Nothing then appears on this individual report. All I get is a blank page which makes sense since I've shrunk all of the subreports.
When the main report prints, the Number Five report prints, there is a blank page for the Number Six report and then the Number Seven report prints. How do I get the main report to not print that blank page for the Number Six report? When the Number Six report will result in a blank page, I want the Number Five report to print followed by the Number Seven report. I've tried using "No" in the main report for the Enabled option for Number Six but the blank page still shows up. I am not forcing any page breaks either.
I have report &/or form which lists booking availability, basically a list dates & number of spaces. I would like to publish it to my wordpress website somehow, preferably quick & easy, not too much export import etc.
Access 2007.
I know I can export to html just note sure if this is the best way & how I then publish it to my wordpress site or upload via ftp hopefully from within Access.
Thought about google spreadsheet, this can be very easily integrated into Wordpress, html code provided.
How to get data to google? Just not sure how it could all fit together or even possible.
Also this export to html does not format very nicely, just black text so far, my report has colours & background colours (mostly from conditonal formatting)
There are a few wordpress plugins that have calendar availability apps but assume the data in web based (database) and no way to get at this.
I have a report that needs to show about 20 different fields from 24 records. I have it set up in landscape view, with one record per line (running horizontally). It allows me to show about 15 of the fields, spanning two pages (wide). I don't know how to add a third page to show the remaining fields.There are no Groupings.
Also, is there a way to "wrap" text in the column header?
I have a report that's oriented landscape. I have scaled and placed everything to fit on a 11" x 8.5" page (the current dimensions of the report are 10.375" x 7.75"). The Layout view shows that everything fits within the borders.
Despite all of this, Print view insists on including a second, blank page. And since the general user will initially be viewing it in Report view (which doesn't indicate 2 pages), then printing if they so desire, they won't know there's a blank page.If not, I'll just tell people to make sure to only print page 1 in the printer dialog box.
