I have a report about bowlers & series. I am attempting to do a running sum on each bowler's series & games bowled each week, so I can get a new composite average each week.The data looks good until the 2nd to last row of data. The running sum on series & games bowled for every bowler is blank even though I have a series that week for all bowlers. And the averages for that week show a 0. The very last row of data for all bowlers is fine and correct.
How do I run a report based on a table, but with criteria? For example, I have a few check boxes on my table and I want to run a report of all the people who have the boxes checked. Thank you!
I need some help with a report that has running totals of both positive and negative values. The report needs to have a subtotal of the positive values only, then the negative values only. The negative and positive values appear all in the same list. The running sum property over group/over all only adds all the values together which is of no use. Is there any easy way to do this?
Example Report snippet: (Ignore all the dots - its the only way I could get everything to line up)
what I think is a running total for each day. I have a form that collects data several times in the day. I want a report to show a total for each day and subtotals for each column and grand totals. I can add the dates and used a running total to the report but the report will show all the entries made for the day not a single total for the day. (I hope I said the correctly.) This needs to be done for all columns. I'm not sure what I'm doing wrong. I've attached what I have so far.
I have a report that is created from the following query (qryTotalProjectHours). What I am trying to do is get the total hours spent on Tasks within a given time period.
Code:
SELECT TasksEntries.Project, TasksEntries.Task, Sum(TimeTracker.WorkHours) AS TotalHours FROM TasksEntries INNER JOIN TimeTracker ON (TasksEntries.EmployeeId = TimeTracker.EmployeeId) AND (TasksEntries.TaskID = TimeTracker.TaskId) GROUP BY TasksEntries.Project, TasksEntries.Task;
I accept the start and end dates in a form and pass it like shown below. WorkDate is a column in the TimeTracker table and is not present in any other table.
When the report is invoked, I get a box where it says "Enter parameter value" for Workdate..
Is there anyway I can get rid of the prompt? I never thought you needed the column name in the SELECT statement to be able to run this.I should add the I tried the query with the WorkDate hardcoded in there and it worked fine and returned the correct results
I remember reading a tut on how to count records using Running totals in a report - but I cannot remember where I read it. It went something like this.
In the section that you want to count, add a field with record source '=1' and make it a running total for the group.
In the header (one level up from where the running total resides) add a field with record source =Max(RunningTotalField)
Although the 'intellisense' sees my 'RunningTotalField' when I create the above mentioned formula, when I run the report, its asking me to input the value for the 'RunningTotalField'?
Have I confused some concepts or am I on the right track?
I am using Access 2003 and trying to create a report that has a running balance of payments into an account. There are also payments out of the account which reduce the balance.
When I add the other columns into the expression for the running total the result shows in the report as "0".
The expression I am using is: =([Escrow Pmt Amount]-[Ins Pmt Amount])
I have this expression in the "Detail" section of the report with the "Running Total" toggled to "Accross Group".
How can I subtract the values in the other columns (Outgoing Payments) from the balance and continue the running total.
The list of payments within the report are date driven and grouped by an account number.
My database is slowly coming together. For the final part of this phase i would like to create a shortcut on each users desktop which runs a summary report of information within my database.
I have criteria set so upon opening the report the user is asked for which address they wish to see information from which works great. But I do not want users to have access to the database, I just want them to be able to click a shortcut, be asked what address they are looking for and for the report to ping up in a 'Print Preview' type layout so information can be seen and displayed but not altered. All users have the access program.
i have a table with health facilities (A,B,C,D) . each health facility has data from several months (Jan, Feb, Mar etc). the table has 2 fields (New Patients) and (Cumulative Patients) . Cumulative Patients is a total of New Patients for current month plus the total patients for the previous month. In the Facility Footer of the report if i create text boxes with data =Sum([New Patients]) and =([Cumulative Patients]) works well.
However in the Report Footer =Sum([New Patients]) works but =Sum([Cumulative Patients]) totals everything. if i try =([Cumulative Patients]).
Hello, I have 4 input field boxes in a form: "basic hours", "overtime hours", "holiday hours" and "total hours" i would like it so that when the user enters number(s) into the other field(s) the total field will calculate (add togther the other fields). So for example if the user puts "10" in the "basic hours" input field and "5" in the overtime hours" field then the "toal field" will display the number "15". i would like it so that the "total hours" field calculates the total progressively after each number in the other fields is input (ie a running total is displayed). The user will always fill in basic hours but 1 or more of the other fields can be left blank. I think i need to do some VB on the after update procedure for each field entry but not sure what the code is?, any help would be brilliant.
Ok - really need some help here. I have searched and searched but i think my problem is slightly different to the ones i am finding.
Basically i have a form and i want to force users to fill in one out of 4 tick boxes. If none of them are ticked when they press the close button i want the form to stay open and a message box come up.
I can get the message box part to work but the form still closes down.
The reason for this is that when the form closes it goes to another form that is linked to it by a unique ID number. This works by the following code.
Private Sub BTN_INVIS_Click()
Dim stDocName As String Dim stLinkCriteria As String
This code checks the boxes and generates the message box if none are ticked - that works great. However it doesnt stop the second part of the code (the move to the next form) from executing if the boxes arent ticked.
Would really appreciate it if someone could help me - i'm fairly new to coding so the whole database is a bit cobbled together (mostly with help from this forum!).
I have a database and one of the functions is to track the purchase of fuel. Part of purchasing fuel is registering what the current odometer reads. My query gets the Vehicle ID, Date of Transaction and Odometer reading. I want to show a report that shows how many miles the vehicle is has traveled for a certain amount of time. If it's for 2013 then I'll put the criteria for 2014 in the date. This will give me a list of all vehicles and their odometer readings. I then sort the date by ascending.
In the report I group on vehicle ID and then I want to show all their transactions and add up how many miles were driven.
Vehicle 1
1/2/201 1/5/2013 1/15/2013 ETC... Total Miles Driven in 2014: XXXXXX
I have DB in access 2007. I have a report that is uses a select query to generate the information for the report. It has been working great, But however lately like maybe with in the last month, it has been causeing Access 2007 to crash. I am having the same issue with another DB that uses the same information but that information is imported in. both Databases have worked great up until two months ago. Microsoft states that it is because of the program. I have tried to repair the DB by using the Repair option. I am confused as to why this would be happening. I can create a new report and it seems to work. but I do not want to change all the DB on everyone's computer just for this reason. I also have two buttons on my report that utilize macros to close or print the report.
In my tables i have used calculated fields. one of the fields is to "total expenses." In a report, i need to show the sum of all the "total expenses", the filed populates in the report but the cents are missing. for example if the amount is 6080.40 it shows as 6080. how can i get around this? I have tried changing the decimal point value to 2 at which point the value turns to 6080.00 when it should be 6080.40 (i am a beginner at this i am assuming the answer will probably involve c++ or visual basic's, two concepts i am not familiar with.)
I am trying to get calculated fields in my report to work but zero values in the data are throwing up #Div/0! and #Error! and #Num!
The main data fields I am trying to work with are:
VehicleReading PreviousReading VehicleLitres
My aim is to track mileage and consumption for a fleet of vehicles and show daily and weekly averages in mileage and consumption and then to flag 20% increase in consumption.
I have a calculated field in my report named Kilometers,
= [VehicleReading]-[PreviousReading]
and also a calculated field named Consumption,
=[Kilometers]/[VehicleLitres]
My sum and average calculation fields in the group footers are only working where there are values above zero in the Kilometer and VehicleLitres and Consumption fields.
In reality there are some days where there has been no travel, so some records will have a zero for the Kilometers field and there are also days when there has been no refueling so there is a zero for the VehicleLitres field.
I have tried using the expression builder to create an IIf function but to no avail.
I have tried copying the syntax suggested by the Expression builder:
«Expr» IIf («expr». «truepart». «falsepart»)
I know I need to get those zero's to fail in the calculation but as I said before all of the suggested expressions I have tried fail due to syntax!
Can anyone tell me how to get a running balance on a report. I know how to create a running total, by setting the "running sum" property of a text box to "Over all".
I can't however see how I can adapt this to give a running balance (as in a bank statement for example). Attempts to do so end up in failure!!
Any way in report that I have 2 reference queries just 1 is to populate all details and 2nd query to filter details and will be the final reporting information???
I have a report that has category, subcateogry and districts.
I can get the first part of the report to work as I want it like so:
Category FruitSub Cateogry Apples OrangesMeatSub Cateogry Pork Chicken Now is where the fun starts. I want next to each of the subcateogries a count of districts, but I want to name of the districts to be at the top, and the counts to go underneath - here is 2 lines to show what I would like.
Category District Name FruitSub Cateogry 2Apples 3Oranges0 The red text "District Name" would be 4 different districts, going across with the counts under the related districts.
I can not get the districts to show up at the top of the report next to cateogories, and go across with all of the districts, it keeps on wanting to list them underneath each other.
All reports that I have seen have a "set" header, not one created on the fly according to a database.
Is this possible to do, and if so, can someone point me in the right direction?
I have two reports, "Quick Glance Report" and "Note Report". The Quick Glance Report comes from a query called (ACE/ARB Table Query) and the Note Report comes from a query called (notequery).
I want to be able to have a calculated field from the "Note Report" in the "Quick Glance Report". Am I able to show a calculated field from one report into another report and how would I do this (If I can that is)?
I have created a report in Access that calculates the dates based on a date-type field in a query. I want to be able to use these calculated dates in another report and sort these dates in an ascending order. With the dates, I also want to display certain information from this report. Is it doable? Please let me know....ASAP if poosible...
This Works:I have a report with subreports that provide totals to the main report. The main report is grouped to provide the totals by customer. Here is the format:
im working on a report at the moment that will generate a standard NIP (nutritional information panel, similar to whats on the back of pretty much all packaged food products, see link below for an example)
[URL]
this in itself is pretty easy, however depending on which market we're selling to, different countries have different requirements for which data is to be shown, ie some markets might require we show how much sodium but not how much fiber, others might require us to show how much carbs and sugars but not how much vitamin C and so on (all up there are 16 different variables for nutritional info, due to size requirements on our packaging we cant simply display all 16 all the time)
at the moment im designing a form which has a drop down box (for the user to select a product) and checkboxes for each of the 16 variables (kilojules, carbs, iron, trans fats, sat fats, etc) following this ive got a report that has all 16 variables on it
i can make the variables that arent ticked on the form invisible (by adding a bunch of IF or Case statements, on print of the report, that determine whether the corresponding checkbox for each variable has been ticked and setting the "visible" attribute to true or false accordingly), however when they are invisible there is still a blank space where the field is meant to be ive got all the fields grouped together, is there any way of making fields invisible and then pushing all the visible fields together so there are no blank spaces?
For each field on the report I have hide duplicates set to yes. for each job id most of the line should be hidden except for a couple of fields (part used and description).
This works in 99% of cases but I occasionally I get the whole line repeated
I've treble checked that the fields are duplicates (they are) and am at a loss what to look for.
I have a production report with 4 one to many sub reports (material reworked, reclassified, rejected, and issued). Each of those sub reports has a sum field totaling up the material reworked, rejected, etc for that lot.
I need a calculated field that subtracts the totals in each sub report from the reported amount produced in the main report.
Should I do this with a calculated field on the report. If so how would I reference the summed fields in the sub reports?
Or should I put a summed field of the amount reworked, rejected, etc in the query the report is based on and make a calculated field off that.?
