I can't seem to find a way to SUM two seperate columns on my report. I've attached an example of what I am talking about. I was able to add the SUM feature to the 'Estimate' column, but it doesn't allow me to add that to the 'Plan' column too. The only options available are Count Records or Count Value.how I can have these both SUM seperately within their columns?
View RepliesI have a simple report which shows data form a table through a basic query and displays it just as the table view. I was wondering if there is a way to get this information to display in two columns on a page rather than just one list which takes up multiple pages?
View 6 Replies View RelatedI am using Access 2003 and trying to create a report that has a running balance of payments into an account. There are also payments out of the account which reduce the balance.
When I add the other columns into the expression for the running total the result shows in the report as "0".
The expression I am using is: =([Escrow Pmt Amount]-[Ins Pmt Amount])
I have this expression in the "Detail" section of the report with the "Running Total" toggled to "Accross Group".
How can I subtract the values in the other columns (Outgoing Payments) from the balance and continue the running total.
The list of payments within the report are date driven and grouped by an account number.
How to turn a single long (page spanning) column of data into "snaking columns" or "newspaper-style columns," but all of the results are only available in Print or Print Preview. I am looking for a way to have the correct, multi-column, result visible in Report View on the screen.
The reports I am formatting will not be printed onto paper; they will be seen only on screen. The data will vary depending on the source table, some have records that are about 200 records long, and others are only 50 or so. The number of columns across the page will need to be dynamic depending the total number of records the report pulls in.
I am having trouble getting all columns in an Access 2007 report to show up in report view as well as to print. It seems like this is mostly occurring in columns that occupy the center of the report.
View 1 Replies View RelatedI have a report that displays 3 different columns of numbers.. and when I try to do a total for any one of the columns the sum option is greyed out and I cannot total any of the columns at the bottom of the report. Everything I have read says I should be able to do that.
View 5 Replies View RelatedI have a report that constists of 4 subreports.I need the first two subreports to render in a two-column format and the 3. and 4. in a single column format.Unfortunatelly I cannot it work as I need to.I have read, that setting the main report in a single-column format and the subreports in a two-column format with "first across then down" setting (Or something like that) is and option.
Unfortunately this option does not fit my requirements.Is there a possibility to set the number of columns through VBA and change it across the different parts of the report?
I have a report, a phone list, which has two columns, see the attached file for a screen shot.
The Employee Name, Mobile Phone and Desk Phone text is in the "Page Header". The Data fields that retrieve from the table are in the "Detail" section. The whole report is 8.89cm wide. The two columns fit perfectly across a portrait A4 sheet.
When I run the report to Print Preview, I get the two columns fine, but the Employee Name, Mobile Phone and Desk Phone text doesn't repeat at the top of the second column. Is there some way of achieving this? I want the part I have circled in RED to appear over the top of the second column as well.
I would have thought there would be a simple check box somehwere that would be something like : "Repeat Page Header on multiple columns", or something as equally useful. Strange that this is so difficult to do, as am sure that this sort of thing is something that lots of people would want to do?
How to display in a report a field with 50 records in two separate columns of 25 records.Is this possible or am I completely off the reservation?
View 2 Replies View RelatedI've accomplished some simpler things like hiding fields based on the data in another field but nothing very complex. To the point: I have a report that shows data in both rows and columns, the report has a 7 columns, 3 of which could or could not contain data other than zero, in which case the column is not displayed. The problem I have is that it could be any of those three at any given time depending on what data is available for that report and what the user wants to see. Basically, if a given company has no data regarding column "A", then column A is hidden, but the main grouping is done through rows so all companies contain at least 0 for all columns (what I did is that, if a field sums the whole column returns 0, then the column is not visible). What I need to get working is the second part of this, have the columns rearrange themselves depending on which column is hidden (it could be that all 3 are hidden). How could I make this work? (btw, autoshrink is not usefull for this since it only shrinks vertically, not horizontally).
View 9 Replies View RelatedI have a large tabular report, 22" and 18 columns. In the report footer I have for each column a series of calculated fields, specific to that column. For example, one of my columns is NumberofCreditsEarned. The calculated fields at the bottom of it are min, max and avg. Another one is Gender, and the calculated fields at the bottom of that one count the males and females and give percentages of each.
I designed a basic form with 18 checkboxes, so users could select as many or as few columns as they want. My original idea was to use the checkboxes to show the desired columns (along with the calculations for those columns) and hide the rest.
The issue is that while the column may be hidden, the white space is not. If I can't find a way to get rid of it, my reporting tool won't be feasible to use. I've researched using "can grow" and "can shrink", but I dont think they'd work on a tabular report like this, where all of the controls are the same height and width, and on the same line.
I've made a crosstab query and would like to use it to create a subreport. In the column headers I have names of courses. Courses can be added or removed. How can I make a crosstab report with dynamic columns?
PHP Code:
TRANSFORM Count(tblCourses.CourseName) AS CountOfCourseName
SELECT tblNmscStaff.NmscStaffFirstName, tblNmscStaff.NmscStaffLastName,
tblNmscStaff.PtOrFtNtl, tblNmscStaff.Ntl, tblNmscStaff.NmscID
FROM tblNmscStaff LEFT JOIN (tblCourses RIGHT JOIN [tblNmscStaff/CoursesPointer] ON
tblCourses.CourseID = [tblNmscStaff/CoursesPointer].CourseID) ON
tblNmscStaff.NmscStaffID = [tblNmscStaff/CoursesPointer].NmscStaffID
GROUP BY tblNmscStaff.NmscStaffFirstName, tblNmscStaff.NmscStaffLastName,
tblNmscStaff.PtOrFtNtl, tblNmscStaff.Ntl, tblNmscStaff.NmscID
PIVOT tblCourses.CourseName;
I have made a cross-tab query which works fine. I also have made a report which is based on this cross-tab query. Due to nature of the cross-tab query the Value column(s) is dynamic. The report I made is based on all available data types (columns). The report works if all data type is available but the report fails if some of the data types are not available (i.e columns are missing due to not having any value or data). I hope I am explaining this correctly,
Is there a way I can use expressions in the report to place a conditional clause that if the Control Source doesn't exist place a Null or 0 in the report or in its place.
I have two collums, currentowed and currentpaid. i want to add another field to my report showing the percent of currentpaid to currentowed but I can't seem to be able to make it work. I tried:
=sum([currentpaid]/[currentowed]) and it doesn't work.
I have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.
1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)
2. If user presses the Print button before pressing Save button then system should prompt user.
Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):
Private bSaveClicked As Boolean
Private Sub Form_BeforeUpdate(Cancel As Integer)
If Not bSaveClicked Then
MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation
Cancel = True
[code]...
I have a blank report and dragged two queries to it so that they are displayed on it. Both queries prompt for a Customer code. How do I get it that I only have to type it in once rather than for each query prompt?
View 3 Replies View RelatedWe have a database that has around 30 queries that are ran on a monthly basis. They all have unique criteria (but there is a crossover of fields that are used), and are all set up so they show only the previous month's data (the date is taken from one date field for some queries, and another date field for others).
We run the queries, and only need the 'count' of number of records that fit the query each month.I was wondering if it is possible to create a report that will run the queries simultaneously, and show the 'count' of the query results in predetermined fields.
I have several reports that creates price sheets for all of my customers. It is a report with multiple subreports within, and I am trying to create a process to seperate them and export them all into [Customer Name].pdf. I have tried to scrap some code together from various forums, and it has been unsuccessful.
For example, one of the reports "rptPriceSheetQuarterly", has a field "txtCustomerName", that feeds the queries for the other subreports. I would like to create a new PDF when that field changes.
I understand I need some sort of looping code that will cut the report up dump them all into one folder, but I am totally out of my element here.
Here is my delima, I have a report that I am able to type in a keyword and it will pull up that report exactly as I type the keyword, however, let's say that I want to pull up someone else's report I cannot. I have to exit out of my report and then go back into it and resubmit the new search.
View 13 Replies View RelatedI am in the learning phase for MS Access reports. I have a datasheet which contains the employee daily activities.I need a report when either or both criteria is selected. For ex..criteria1 is Start date and End Date and criteria2 is Employee Name.Output of the report should be based on the selection of the criteria ,as I said either or both.
View 3 Replies View RelatedI would like to ask about on how to display my attached pictures to my report. I'm using MS Access 2007 and I have a table names:
Projects - ProjectID, ProjectName, StartDate, EndDate;
Task - TaskID, ProjectID, TaskName, Pictures;
Picture datatype is Attachment and it is multi-valued field so I created a query to extract picture per ProjectID and to be used as a Subreport. Query results shown below:
ProjectID Attachment
11 tulip.jpg
11 hill.jpg
10 panda.jpg
10 shark.jpg
Now, I have created the sub report and linked it Project table. Result is the pictures add up vertically or downward where there is a big space on the right side, I want to have it from left to right or horizontally.
I'm trying to print out several reports from one button. I have created individual buttons for each of the reports and they work fine.
But when I try to amalgamate them it stops printing after the first two reports regardless of which ones are at the top of the list.
The code I'm using is ......
Private Sub Print_All_Click()
Dim strFilter As String
strFilter = "Business_ID = Forms!frm_Business!Business_ID"
DoCmd.OpenReport "rpt_Front_Page", acPrint, , strFilter
DoCmd.OpenReport "rpt_D_and_N_Suitability", acPrint, , strFilter
[Code] .....
I am trying to link 2 reports so that when a user selects a field in the 1st report it will only return records specific to the filters. I have used the following code via a field in a report to return records in a seperarte report using 1 filter "BudgetPool". What I need to do is add a second filter "ContratorType" to the code to allow the second report to refine the records.
Private Sub BudgetPool_Click()
DoCmd.OpenReport "Budget Expenditure by Pool per Project Type", acViewReport, , "BudgetPool=" & Me.BudgetPool
End Sub
I have a table with some meeting topics, and I have another table with subtopics for each topic of which there can be multiple instances on no instances at all (let's say weekly updates if that makes sense).
What I would like to have on a report is all the information, all the topics, and for each topic, all the subtopics, if there are any. As an example:
Code:
-------------------------------------------------------------------------
Topic1 Description1 DueDate1 Responsible1 UpdateDate1.1 Comment1.1
UpdateDate1.2 Comment1.2
-------------------------------------------------------------------------
Topic2 Description2 DueDate2 Responsible2
-------------------------------------------------------------------------
Topic3 Description3 DueDate3 Responsible3 UpdateDate3.1 Comment3.1
UpdateDate3.2 Comment3.2
UpdateDate3.3 Comment3.3
-------------------------------------------------------------------------
What I tried so far is to make a query left joining the update table with the topics table and that seems to get all the data in one place, the only thing is that if more than one update is present for a topic, the topic will appear multiple times.
I then thought I could group the data into the report and I could ... sort of ... What I did is to add all the topic fields into the grouping header, that seemed to eliminate duplicates, but I don't like the results at all. First of all, the first (or only) update item does not appear on the same line as the topic, it appears below, and that would not even be that bad, I could live with that. The worst thing is that if a topic does not have any updates, empty fields are still present and they get shown even after grouping, as if being an actual entry. Even if updates are present, a blank line still appears along with the rest of the updates, even though it wasn't there before grouping.
I have a Table of Special instructions. Each type of a Yes or No Text Box. There are 13 items in this table along with the ID key.
Each Field has a Special Description. I used the Y/N format for ease of use for user input to simply select the applicable options.
However, I need the text description to display on the printed report, which is not the problem.
So i created a separate text box for each item that simply says; If True, "Description", else blank. And named each one sp1...sp14.
So now, I want to take these text boxes with the proper descriptions and string them together.
My formula is: =Trim([sp1])&" "&([sp2]) etc.
This does produce the proper text results, however, and oddly enough, each item displays on its own line rather than in a string.
I get:
SP1
SP1
Instead of the desired result of SP1 SP2
This seems to simple, and probably has to do with the yes/no format. I've tried with and without (), and using + instead of &, and to troubleshoot, I eliminated the " ". No luck. Everything is coming back as a single column.
I am trying to produce a report that shows a single record that has fields in multiple tables. When these reports we're in Word form they were about 7 pages long. I put them in access to be able to update the data in one or more than one of them at a time more effectively. But now I am unable to get them print out one at a time like they looked originally in Word form.
View 1 Replies View Related