I have a report that contains a subreport (form) that pulls records from a query. When I go to run the report, the records are there correctly, but the subreport continues to duplicate many times.
How do I fix this?
I am creating a report that is organized by project. The detail lines are to list payments applied to the project. How can I skip the detail section (or print a single blank line) if there are no payments in the separate payment table that match the project ID? Is there a way to tell that there were no matching payments and format accordingly? I currently get multiple blank lines.
View 2 Replies View RelatedI am trying to create a report which basically includes the following:
Company, Wages, Contribution.
Each company reports wages for each employee every month. Then they also contribute to a general fund based on a percentage of the wages. For instance:
Company---Employee---Wages---Contribution
CompanyA---EmployeeA---$4000---$40
CompanyA---EmployeeB---$3800---$38
CompanyA---EmployeeC---$3800---$38
CompanyB---EmployeeA---$4200---$42
CompanyB---EmployeeB---$4200---$42
...and so on.
Each employee is required to contribute, in this example, 1% of gross wages to the general fund.
On occasion, the company does not pay in the required 1% of gross, say, for CompanyA EmployeeA, they only paid in $35.
Here is what I need to do. If any contribution amount for any employee is incorrect, I want to display all the records for that company, not just the incorrect ones. The report is grouped by Company, and may contain dozens of companies.
I am already passing a number of criteria to the report using a filter, including the date range and other fields which are informational.
I have a subreport and would like to have a header that repeats on each new page if it extends to multiple pages.I tried the suggestion I have seen to create a dummy group header based on an expression of =1 and set the group header "Repeat Section" property to "Yes".header now repeats before every record, instead of just once at the top of each new page.
View 1 Replies View RelatedI'm trying to create a report where I can use a section header as a hyperlink to show/hide detail, but only for that section. For example, my customer names are:
Code:
ABC Co.
ZYX Co.
123 Co.
If I click on ZYX Co., I want it to show the contracts for ONLY that customer:
Code:
ABC Co.
ZYX Co.
Contract 1
Contract 2
123 Co.
Right now, my code looks like this for On_Click:
Code:
If Me.Detail.Visible = False Then
Me.Detail.Visible = True
Else
Me.Detail.Visible = False
End If
But it shows and hides detail for ALL customers when I do this. Is there a way to only show/hide for the customer on which I click?
If I have a report and it has controls (labels representing column titles) in the page header. Now when I print the report - if it happens that the last page has no detail records - but there is text boxes and so forth in the report footer. Is there a way to not display the page header on the last page?
I have a report where the last page shows the page header - and the field/column labels on the page header - but for which there is no detail records left to display - on the last page. There is report footer information that should display. It just looks weird because the field/column labels show at the top of the page - but there is no data remaining to print under them on that last page.
I have a database of high-school football players, and I am looking to print out single page reports (or forms) that will show detail from several tables and queries. This will act as their resume when they visit schools on recruiting visits. The reason for needing query items, is that I have developed queries that return the most up to date height, weight, 40 time etc., and that single most up to date number is what should print, not the entire table. When I try to build a report it will let me bring in multiple tables, but not queries.
View 2 Replies View RelatedIn my report when the Group Header and the Detail section will not fit onto one page, it prints the Group Header on one page, and all of the Detail on another page. Is there a way to keep them together?
I have already tried the 'Keep Together' option in the Sorting/Grouping window, setting it to both Whole Group and With First Detail, but nothing seems to work.
My report has an empty Page Header, a Group Header, Detail, and an empty Page Footer.
when i generate a report i intermittently get a page that has the detail section highlighted. The report generates an invoice for each customer selected, a new page for each invoice with a repeating header on each page. I have used the vba to some of the formatting on the page. Usually there are between 20-40 pages generated with each report, or there is an option to print just one invoice. I get the highlight on 1 page on some set of invoices, and other everything works fine.
I can not for the life of me figure out what variables are causing the detail section to be highlighted. Does not repeat on a specific customer, place in the report, or any specific that i can tell. What settings/variables/triggers/events would cause the detail section to become highlighted blue.
Right now i can generate the report, see a blue page(usually after its printed), and the regenerate it and its not there or on a different page. The invoices uploaded are for the same person generated right after each other..
Is there a way to only highlight the last row of the detail section in a report?
I tried the following code in the "Format" but could not get it to work in Access 2010.
If Me.ClaimStatuses = "Total Potential Recoverable" Then
Me.Section(acDetail).BackColor = vbYellow
Else
Me.Section(acDetail).BackColor = vbWhite
End If
Where "ClaimStatuses" is the control text box and "Total Potential Recoverable" is the value I want to equal so this row which is the last row will be yellow.
Hi,
I want a user to click the report, and an input box appears asking for a product number. This product number is used in a recordset (VBA code in the report) to fill the text boxes in the Detail section.
Code:Private Sub Report_Open(Cancel As Integer)Dim rst As DAO.RecordsetDim db As DAO.DatabaseDim itemCode As StringSet db = CurrentDb()itemCode = InputBox("Enter the Item Number", "Complete Catlog Prices")Set rst = CurrentDb.OpenRecordset("SELECT * FROM [Catalog Prices Complete] WHERE Prefixprodno = '" & itemCode & "'", dbOpenDynaset)Do Until rst.EOF Me!txtCat = rst("Volume") 'error 02448 cannot assign to this 'Me!txtPrice = rst("Price") rst.MoveNextLooprst.CloseEnd Sub
I'm sure my text box is called txtCat though. Is it an array I should try to fill? If so, any suggestions :S
Thanks,
How to keep Access from including the detail line items in my report total?
Below is a quick image of part of the report.
The report is compiled from two tables. The first table has detail information on each line, in four columns:
State Name Amount Quantity (Not used)
AL Store 1 313.94 60
AL Store 2 12.59 1
AZ Store 3 576.45 90
CO Store 4 172.22 24
CO Store 5 502.25 88
The 2nd table is a summary by state with three columns:
State Amount Quantity (Not used)
AL 326.53 61
AZ 576.45 90
CO 674.47 112
I'm trying to make the report group by state, then name, amount and a subtotal for each state. This all works fine in the report.
I want to also add the amount field from the 2nd table (State Subtotals) to the report just for reference. I've managed to make this work as well. (See State Total on image)
The problem that I'm having is that when I try to do a final total of the State Total column in the report footer, it seems to add the (State Subtotals) amount field on every detail line (See red numbers in picture. they are not actually on the report, but Access thinks they are and includes them in the final total).
So far I've tried different joins, hiding various fields, sub reports, ect. I just can't figure out how to stop Access from calculating the detail lines.
In the detail section of my report, I recently added a second row which has only 1 text field. When the value of the textbox in the 2nd row is null, I want the total row height equal to just the first row. When the value in the textbox in the 2nd row is not null, then the total row height is equal to row 1 and 2. I tried to make the textbox in the second row invisible when it had a null value thinking that when it was null, the report would shrink to the first row height, but that didn't seem to work.
View 1 Replies View RelatedThe first report example is what I get when I start on the main form and select an organization, run the report, opens report - BIG SPACE between the details and my footer section which holds a subform.
The second report is what I need it to look like, what's strange to me is I get the report correctly when I just run the report (I don't pass the organization into the report from the main form)
I tried changing the background color of the detail section and the footer section to figure out where my problem is but the space just stays white.
We are creating a report and for some reason we can no longer extend the detail section of the report. It has stopped at 2 A4 pages length and won't let us extend it further. We have about 7 pages of the report, I didn't think this was too much?
View 2 Replies View Related Products report
shows on report as:
Order no Product
Order no Product
Order no Product
eg.
012345 table
012345 chairs
012345 lamp
I want to show
Order no Product, Product, Product
eg.
012345 table, chairs, lamp
I need to hide a row in my report for example (in Detail Format event of the report):
If me.txtReleased = "YES" then
hide row
endif
I have a query with various entries, pertaining to various invoices. Each line of the query corresponds to a piece of work done, and there may be several lines in the query pertaining to one invoice. I've written the code to input data to a report.
If there are multiple lines in the query to be added to the one invoice, I don't know how to write code that will add those multiple lines in the detail section. Same type of data on each line, just basically pertains to several different lines of work.
Is there a simple way, or special event, that can be used to turn off the visibility of fields when they are in the detail or in a created header for a field?
I tried using the report's Load event, but this kept giving me errors. Are any of the events in the detail able to allow this?
I have a combo box and button on a form that should open another form and display the results in a datasheet view filtered by the combo box selection. The second form is based on a query that has the following criteria in the JobType field:
Code:
Form!frmReportView!cboType
When I run the query it correctly prompts me to enter a value for the criteria and displays the proper results. Likewise, the same thing occurs when I run the second form independently. The problem is when I try to run it with the combo box and button. The second form opens in a datasheet view with the headings, but no detail records are being displayed.
The record source of a form that I have is based on a user selection in a combo box in the header of the form. When the form opens there may or may not be any records to display. Currently I put up a message box when there are no records displayed but this only happens when the form is newly opened.
I was wondering if it is possible to have a label displayed in the detail section instead whenever there are no records to display, such as something along the lines of "There are no records to display with the selected option, please choose an alternative.".
I realise that I may be asking the impossible but I'm a member of the "If you don't ask you'll never know" club.
Tim
I am trying construct a form that will only show an invoice if all the invoice records have been approved. I have created a form that will allow the user to look at each line of an invoice and has a checkbox to approve it. If the user has selected all the boxes it will disappear from the Approval view, which is a query that shows unique values.
The problem is that if all of the lines but one are checked it will also show up in the view for the unapproved invoices AND the approved invoices. I would like to know how to structure a query that shows unique values but ONLY if ALL of the invoice line items have been approved.
I have a main form (Parent) along with a subform(Children). I want to have a button that generates a report with the Parent information as a header and the items in the subform as details. In addition, I want the report to show only the children that were recently added not all of the children.
View 1 Replies View RelatedWhy so many repeats of the same answer
Thank you MWalt for your reply about finding the stock in hand. It works, sort of. It gives the answer but I end up with each item being repeated about 141 times. So instead of ending up with a list of about 140 items, I have a list of 20000+ because each item is repeated. I'll include the code of the first query that you suggested called qryNotItem...where do I go from here.
This part works, but when I do the second part I run into an error.
SELECT [Equipment Inventory].EquipmentID, [Equipment Inventory].[OT Equipment type], [Loan details].LoanOccID, [Loan details].[Return date]
FROM [Equipment Inventory] INNER JOIN [Loan details] ON [Equipment Inventory].EquipmentID = [Loan details].EquipmentID
WHERE ((([Loan details].[Return date]) Is Null));
Thanks
Hello, I have a system where a person may have several posts.
Ive made a query which shows everyone who has a post.
The problem is that if a person has three posts, the record shows three times, how do i make tell a query to do this:
Get all records, look at the name field, show only 1 record per name.
How do i do it? Whats this called? Where do i find out more?
Ant...
I am building a database through access 2003 and have included a text box labeled "comments" in my design view. Now when i go to input information in the "comments" column in the datasheet view, the same text will appear for every entry. If I try to change the text in the next row, it will automatically switch all of the previous "comment" text to whatever I have entered. How do I fix this?
View 13 Replies View Related