I am having a problem setting the margins to print labels in access. I go to page setup and change the margin size click ok and nothing happens to the label and when I go back to page setup the margins have returned to their original values. I have already selected the label printer and labels that im using.So im baffled as to why it wont accept margin values that don't cause the label to be printed over 3 labels.
View RepliesI am printing invoices and need to print the label in a subreport at the end of each customer only once. This is what I want it to look like:
2014 payments applied to cap: GA $8,078.00
NC $1463.00
SC $155.00
NOT
2014 payments applied to cap: GA $8078.00
2014 payments applied to cap: NC $1463.00
2014 payments applied to cap: SC $155.00
I use ACCESS, but I do not know SQL. .
I have always noticed that when creating a report, when you make a paragraph using a label, the alignment and size of the text/paragraph is always different when you preview the report than when you design it.
This makes alignment of paragraphs tricky, especially when you are trying to insert a bold faced word into the middle of a block of text by using a separate label.
I am using Access 2000
Good morning all.
I have an annoyance!!! I have a few reports in the access database that I'd like to hard code the print margins so that when I send any database updates to users that have different printers, the margins all come out the same. So that I don't have to then go to each computer I've updated the database on, to open each report and reset the correct print margins.
Another annoyance - along the same lines: A report that previews correctly several times and then - for no reason, previews with larger margins and, hence, data is lost off the right.
Any suggestions would be appreciated.
Thanks
Martin
I'm using Access 2003.
Is it possible to set the top margin on the first page of an Access report different from all the other pages?
I design/maintain an Access database for a friend's business using my home computer. The printer he uses allows for much smaller margins than mine does, so anytime I edit a specific report that uses very small margins, my computer automatically increases them to the minimum margins my printer allows and when the business owner runs the report on his computer it spills on to extra pages.
Right now every time I make a change, I need to go directly to his computer and adjust the margins within the report after the new front end is uploaded.Is there any way around this, such as telling Access to ignore the printer's minimum margins?
Access 2007 RUNTIME.I have 2 different printers, 1 for invoices A5 & one for general use A4.
I use
[URL]
and can change printers & some stuff but can't change margins.
Is there a way to change these margins via VBA that can be set in RUNTIME.
Like now, I have just had thousands of invoices pre-printed layout but the company managed to move the margin 5mm over so I have to program my MDB reports to reflect that.
I have to develop a software that allows users to print data from a GUI. The GUI is a form containing several fields: the user can choose only the fileds he wants to print (I thought to a checkbox to choose the needed fields)
For each field the user can specify: font, x,y coordinate to locate it into the label to be printed
The user can decide also the format (height,width dimensions) of the label
I imagine that the great difficulties is to find the function to create the string to sent to the printer....
Access 97.
Not sure if this is the right area to post this question in, but here goes....
I want to print mailing labels but I only want to print selected names from my database, not every name in the database.
How do I do this?
Make it simple, please.
Thanks.
I have an Access database that includes a customer listing. My client would like me to include a button on a form that prints off all of their customers' names and addresses onto mailing labels. I know how to do it manually by clicking on the Customers table, clicking Labels under the Create ribbon, selecting the fields, selecting the label manufacturer, size, etc. etc., but the customer would prefer to have just one single button.
I've looked everywhere for VBA code to put into a macro that does this. Unfortunately, unlike Excel, Access doesn't have a "Record Macro" option so I can attach it to the button.
Table: Customers
Fields: FirstName LastName Address City State Zip (There are other fields, but they are not relevant to printing address labels)
I need to print a contiguous subset of records from a table, not the whole table. I'm using a standard Avery #5349 label page, but need to print them in a vertical orientation (2 1/3" wide x 3 3/8" high; 4 across w/2 down), so I have to create a custom landscape label to print on regular 8 1/2" x 11" paper, but defined as landscape 11" x 8.5". When I do Print Preview, and orient the printer to Landscape, the Print Preview still shows Portrait, so I'm losing labels off the right side of the screen.
I know I can export the table to an Excel spreadsheet (to be used by Word's label print functions); the custom label page definition there is correct, and the labels print correctly. But I'm trying to simplify the whole operation by printing the labels from Access.
1. When designing the Access custom label definition, the Edit Label page graphic doesn't reorient and redimension the labels' layout as I enter each label dimension (as it does in Word), so I'm not sure which dimensions are correct (I've tried both ways). When I go for the Print Preview (and specify that the printer is to honor Landscape mode), I'm told that the dimensions won't fit on the page .. and I've seen the messages that say to ignore this if printing multiple labels .. "it'll probably print OK." Do I just (in my mind) rotate the graphic 90 and enter the measurements as I do in Word?
2. I haven't gotten to this point in Access yet: can I format each field differently (font, size) in the 1st label, then replicate that label's design across all (as in Word), then fill with data from the table?
3. I'm a DB lightweight .. how to select a range of records from a table to print to the labels? I don't want to print the whole thing.
4. Similar to #3: if I decide to export a table to a spreadsheet for input to Word, how to export just a range of records? I've been exporting the whole table, then editing the spreadsheet to delete the unwanted records, before inputting it as the Recipient List to Word's label print functions.
I'm trying to develop the necessary techniques at home on my Windows 7, Office 2010 platform. When I get it all figured out, I'll try to implement it on the target platform: my church's XP Office 2007 environment.
Hi all,I've been struggling with this for a few hours... I sure hope that the solution to my problem is complicated so I don't feel really dumb!I'm trying to design a database to eliminate the HOURS that my mom spends trying to format mailing labels in Word. She deals with about 50 clients at a time, and sometimes needs to print labels for just a selection of them, but not all. I'd like to design a form where she can select (using an option button or similar) the clients for whom she wants to print a label, and print them all at the same time (rather than printing one at a time, which I can handle on my own). Creating mailing labels will be the only function of the db so the info stored in it will be relatively simple.I have the Northwinds db installed, and I've found the sample Macro controlling the Where condition for the labels report. I understand how to make it work for a single selection from a combo box (ie: only print labels for customers from a specific country)I have my report set up so it shows a label for each client, pulling data directly from the main table. No troubles with formatting. **knocks on wood**My problems:1. I searched this site and found a link to the MS KB file that outlines how to print multiples of one label or skip used labels before starting to print (Q95806 - "How to Skip Used Mailing Labels and Print Duplicates"). I'd like to use this, but can't make it work.2. I can't figure out how to "link" the option button to the client name as it's listed in the form, and then tell the report to only print labels for the selected clients.I have very little coding experience but I can make some simple code work and am OK at customizing pre-written code to my own needs if it's well commented, so VB isn't entirely out as an option.I have a possible solution in mind that involves creating a query that makes a new table with only the selected clients, which is then used to make the labels report. I think I could make that work if I could just figure out how to select the clients in the first place.I apologize in advance if this has been taken care of elsewhere. I tried to find it, but had trouble coming up with the right search string!Thanks in advance,~ Mel ~p.s. I'm using Access 2000.
View 3 Replies View RelatedI am using access 2010 and have made a simple database for the company I work for. This consists of the a table of the raw data and a form to make the data printable.
I have been asked by our admin person if I can make it possible to be able to print labels from it. I know it is possible via the wizard but very limited.
What we really need is to be able to select the people from the table that we want labels for.
I have added a true/false check box to the table called 'label?'
I have a form where I'd like to create a button to print labels from a labeling program called Label Matrix. I already have the label set up in Label Matrix to draw info from the Access table, and I know how to create a button. I can't figure out how I would make the button print the label.
View 5 Replies View RelatedMy parameters are linked to a form and say:
[Forms]![FormName]![Field] or [Forms]![FormName]![Field] Is Null
Ordinarily this works fine in returning either the selected value or all values if left null.
I need to pull in data from a Crosstab query, which means setting my parameter labels to [Forms]![FormName]![Field].
The problem is that setting the parameter labels is conflicting with pulling all records if the form dropdown is left null.
If I keep my parameters simple and just say [Forms]![FormName]![Field] then the query works with the crosstab data, but I can't do that. I need to show any records if the dropdown is left null.
The crosstab data isn't specifically the problem but needing to set the parameter names seems to be
I think I may have found a workaround by labeling the column headings in the crosstab, which means I don't have to assign parameter labels
It would still be good to know if there's a way of making it work with the parameter labels but this will do for now...
I have a button on a form which is used to print shipping labels. This button runs a Query and then a report using the code below.
Private Sub SaveBtn_Click()
DoCmd.SetWarnings False
DoCmd.RunSQL "Update BookInTable SET DateBookedOut = '" & Me!DateTxt & "' WHERE BarCode ='" & Me![BarTxt] & "'"
DoCmd.RunSQL "Update BookInTable SET BookedOut = True WHERE BarCode ='" & Me![BarTxt] & "'"
DoCmd.OpenQuery "PrintLabelQuery"
DoCmd.OpenReport "Labels", acViewPreview
DoCmd.PrintOut , , , , 1
DoCmd.SetWarnings True
End Sub
But I need both the query results and the report to not be seen. All I want to happen when clicking the button is that a label is printed.
I have an unbound form with an associated report. When the user hits the 'print' button on the form/screen, the report is launched in the background. In the On Load event of the report I populate the report fields from the forms field as so:
Code:
Me.txtAddrMainLine2 = "NAME " & UCase([Forms]![frm_OrderRx].[txtPatientName])
This works like a charm as long as I call the report in Print Preview mode (i.e. with acViewPreview). But if I send the report directly to the printer, none of the fields print.
I've read about using other report events to populate the fields (e.g., On Format and On Print) and also something about using TempVars to pass the data. But I haven't read anything that's clear and definitive about the full answer.
Hi,
I have a command button that opens a report. The report has many subforms in it. I am sending open args which existingstewardship. I want one of the labels of the labels to be visible if the me.openargs = "existingstewardship". the code is not working. I have tried to debug when I do this I have found the open args are null and I am wondering if the open args are null is this because they were sent to the main report from the command button and the subforms in the main report do not get passed the open args.
Does anyone have any idea ? how I could make the box visible or not visible in subreport from the command button. The other option I have would be two different reports. Thanks PWF
1Create a report called rptCustomersByGender. The report should:
a.Print your company's name at the top of the first page only
b.Print your data labels at the top of each page
c.Group your data by gender
d.Display all the customer information in the detail section
e.The customers should display in ascending numerical order by Last Name
f.Below the list of Female customers, it should say: "Total number of Female Customers:" and then the total number of female customers should display. Do the same for the male customers
g.The page number should display at the bottom of every page
h.The list of Female and Male customers should each print starting on a separate page.
i.Make sure the report runs without producing any errors and looks professional.
I created a report and grouped it by gender but I can't do step F. creating two different labels for each group..
I have created a report to display a bill of materials (boms). The report works as I have designed. I have also figured out how to filter the report using the docmd.openreport vbasic call with filters. This works fine. I use a form to select the filtering I need in the form of 2 Listboxes populated from tables. The form opens, the report generates and displays in preview mode. What I cannot do is the change the title text (Text Label on the report Header). I would like to use the selected items in the listboxes as sources of text for these controls on the report so I can use the report over and over for different boms. ANy help would be greatly appreciated! Vbasic I hope!
View 1 Replies View RelatedI've created labels in my database and when I print them on a label printer, I get a blank label in between my printed labels. I've checked the printer settings and properties and can't find anything. I've also checked the database properties and can't find anything. Is there something in the database that I'm missing?
View 6 Replies View RelatedI currently have a set of labels that works flawlessly - it has 2 columns and 20 rows. I have a form that I can select which label to start printing on so I use up a full sheet with no waste. [working labels attachment]
The labels I'm trying to print on now are 1.25" x 10", as seen HERE. Since I cannot rotate the whole report 90 degrees, I set up the labels to have one column with six rows instead of 6 columns with one row (landscape instead of portrait).
I copied the entire label printing process from the known working report. For my new set of labels, the label prints great if I have just one record, and/or I start at label #1. If I want to start at label #6, it just prints slightly lower on the page instead of at label #6 position (which is the bottom of the page). [label at #6 position attachment].
I have a small receiving inspection database that prints lables for each item received. However when they use the program on a different computer the lables do not print on the lable printer at that location.
View 1 Replies View RelatedI have created a report which contains within it multiple sub-reports, which I use to generate a document for management meetings on a bi-weekly basis.
For each of these I have the subreports filtered to a unique number for consideration that period e.g. LIKE "88/00039" which relates to my data.
In order to change this I have to manually update each of the filter commands within the subreports but I assume there must be an easier 'catch-all' method of achieving this?
Ideally I'd be looking for a command prompt so I could enter just the number sequence e.g. "88/00040" and then enter this (via a corresponding macro or similar) to update the filter commands.
I have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.
1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)
2. If user presses the Print button before pressing Save button then system should prompt user.
Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):
Private bSaveClicked As Boolean
Private Sub Form_BeforeUpdate(Cancel As Integer)
If Not bSaveClicked Then
MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation
Cancel = True
[code]...
I am still trying to get a hang of development in access 2010.
I would like to design a form with a listbox or a combobox which holds all 8 of my reports (a table has all the reports), with a Print and a Preview view buttons. In addition, the user must be able to select if they want to view the report by month, quarter and the year in question.
How do i have a specific report print or previewed based on the value selected in the listbox or combobox and the date criteria.