Reports :: Show Fixed Size Data In The Bottom Right Corner Of Page When Printed
Jul 3, 2015
I have a report which shows the results of two separate queries in a simple table view.
One set of data varies in size depending on the amount of records and the other is a fixed size and never changes.
I'm wanting to make my report always show the fixed size data in the bottom right corner of the page when its printed.
I've tried putting it in the footer section of the report but don't want it to affect the size of the details section and just show next to the other query results.
Is this possible and if so how would I achieve this?
View Replies
ADVERTISEMENT
Nov 7, 2013
I am using MS Access 2003.I have a report whose Detail band contains a zero-height Comment field positioned at the bottom of the other single row of fields. It has Can Grow = Yes, so it sits waiting to grow if there's any data in this Comment field.
However, when this report prints, if the Comment field just "happens" to straddle two pages, it gets positioned only on the first page and gets cut off in the process. (See attachment 2.) Ideally, the entire field should display on the second page instead.
If I adjust the margins in Page Setup, I can fix this on this particular report. However, depending on the data being reported, these new margin settings can create a problem for the same report with different data. (All depends on where the Comment falls.)I'd like the report to work consistently, no matter the data or margins.
View 1 Replies
View Related
Oct 2, 2014
I have a report which is grouped by employee number - each group can have one or many records displayed - it works fine, but can look untidy sometimes when there are more records than will fit without wrapping onto another page; this is particularly prevalent when there are two or three groups - the third one may run over onto the next page, without group headers.
Is there anyway to force a page break at the bottom of a group if that group is not going to fit on the current page in its entirety?
View 2 Replies
View Related
Oct 23, 2014
I am trying to create an invoice report. I want to add all the costs from the detail section in my footer. I have accomplished this in either the Report footer and/or the page footer, but the problem is that the report footer doesn't go to the bottom of the page, and the page footer doesn't go to just the last page. I have tested a bunch of suggestions that don't seem to work.
1. Print page footer with Report header = NO - only works if your report is two pages or more.
2. Private Sub PageFooterSection_Format(Cancel As Integer, FormatCount As Integer)
If Page = Pages Then
Me.[TextBoxName].Visible = True
Else
Me.[TextBoxName].Visible = False
End If
End Sub
The Page functions worked, but it did not change the results from page to page. If it was a two page report, then the if statement is false and the text box was not visible on page 1, but it also was not visible on page 2.
View 1 Replies
View Related
Nov 22, 2004
I have a report that lists states and cities within the states. When a state name happens to be at the end of the page the individual cities appear on the next page with no State heading. I solved the second page problem by setting the "repeatSection = Yes" in the Section Header (though I haven't shown that in the example below).
But the previous page (which just shows the State Name and no cities looks dumb. Is there some sort of solution.??
(Actually I would also like any State that continues to a next page to not just have the state name but something like
" Colorado (Continued)" Is there anything I can do in VB to make a page break if the section is going to print but therer isn't enough room for one detail line?
This is what I currently see
Alaska
Ancorage
Prudo Bay
California
Whittier
Anaheim
Colorado
------------------------Page Break ---------------------------------
Denver
Pueblo
Colorado Springs
Deleware
Dover
-------------------------------------------------------------------------------------------
Thanks !
View 1 Replies
View Related
Aug 8, 2013
I need to have the last page of a report in access print to an 8.5x11 instead of 11x17 (the rest of the report has to print 11x17). No clue how to set it up so it's automatic...
View 2 Replies
View Related
Apr 21, 2014
I have a database of high-school football players, and I am looking to print out single page reports (or forms) that will show detail from several tables and queries. This will act as their resume when they visit schools on recruiting visits. The reason for needing query items, is that I have developed queries that return the most up to date height, weight, 40 time etc., and that single most up to date number is what should print, not the entire table. When I try to build a report it will let me bring in multiple tables, but not queries.
View 2 Replies
View Related
Jan 8, 2014
I'm tracking some charges and want to report them based on month/year and an Early/Late (yes/no) flag within the query I created. When I wrote the report I grouped on mon/year then on Early/Late, then calculate averages. I then want to calculate the difference in the charges between the Early & Late rows. Here....
Jun 13
32 868 27 (Early row #, charge, avg)
11 1279 116 (Late row)
Now I want to subtract the 27 from the 116. I figured out I could assign the 27 to a field in the header and the 116 in the footer, that's the only way I could make them "stick". I then calculate the difference and things are great. Until I try to print it. When I print the difference is 0 because the group header & footer fields are both populated with the 27.
View 14 Replies
View Related
May 7, 2015
Is there away to have the report footer only to display on the first page?
View 4 Replies
View Related
Sep 18, 2014
Is there a way to have a datasheet open with the last record at the bottom of the page? I now have it opening to the last record, but it has the last record at the top and can't see the records before it without scrolling.
View 2 Replies
View Related
Feb 26, 2013
The column in my list-box did not show all the text i save in the table field. is there any limited size for list-box's column to show the data ?
View 2 Replies
View Related
Sep 24, 2004
I have seen large projects in which there are clearly several printed database reports printed out to make one booklet.
1. How does one get page numbers for multiple reports to go in sequence instead of starting over again at 1 for each report.
2. How can you add a page reference in one report to something in another report?
Do you have to do these things by hand or is there a way to create a something with auto numbering capabilities? Do you do it by importing the reports to MS Word and creating a master document?
View 2 Replies
View Related
Oct 3, 2013
I have now a report that span around 2 pages. It has subreports in the report that depening how many rows there are they can grow or shrink.I have the problem that the second page the top margin is to close to the top of the pager. The paper has a logo on the right top side. I can make the first page look nice under the logo, but the second page prints to close to the edge that prints over the logo. I did add a page break, but when the page 1 has more data, it flushes this to the next page. The page 2 is now page 3. How can I avoid that, or make it so that the margin of the second page/next page is on the correct lenght of the top. I tried it with the page setup, but it does not work.
View 3 Replies
View Related
Feb 11, 2015
I've created a report based on a query that shows me the jobs that have been added to tblJobs between two selected dates.
The report works fine and displays all the information I need, however other than being sorted by day of the week i.e. Monday, Tuesday, Wednesday etc. The records just run on one after another.
I want to create a page break, so that a full week is shown on a single page before then forcing a new page when it moves in to the next week.
View 8 Replies
View Related
Sep 24, 2014
Access 2010 report based on query based on 3 views using ODBC with the following sections:
Report Header
Page Header
Detail (1 - 3 lines)
Page Footer
The detail section has these lines...first line exits for all students, other 2 lines optional. Each line includes data from each of the 3 views:
Demograhic and bus/route information
Special needs information
Additional text information
Each student may have multiple lines in the detail section, one for pickup route, one for drop-off route and possible other routes.
Using VBA and the On Format event of the Detail Section, I have formatted the report to not display repeating information (not apply to use "Hide duplicates" feature) and not display either/both of the optional lines in the detail section.
All works well except that on the first line of each subsequent page, most of the data is missing. I have stepped through using the debugger and see that the data is returned by the query, but not displayed on the report.
View 3 Replies
View Related
Mar 6, 2015
I have a 2 page paper form/report (however you want to categorize it) that I manually have to fill out and submit every month. I am trying to digitize this process using Access but am having difficulties. This paper form is actually pretty simple. The top third of both pages contain just static information like company name, address, phone and etc. The "detail" section of page 2 is basically laid out like a crosstab query. The only data involved in page 1 is grand totals from the crosstab query on page 2, plus an additional calculation.
How to create an Access report in this specific format. I was thinking along the lines of scanning these pages and attaching them as an image in the report and just overlay the data on top of in in the appropriate locations. But this is proving to be difficult as I am getting a whole new page with each new record of data, yet alone was able to figure how to get a different "format" of data on the second page.
Completely recreating the paper form as an Access report is not "impossible" but would prove to be difficult with the limited formatting capabilities of Access reports.
How I could create a report like this that can be printed with 2 different pages. As stated, page 1 is just a total of the data in page 2 so the actual order of the pages laid out on screen or printed is not a big deal.
View 2 Replies
View Related
Jan 18, 2005
Greetings,
I will try to explain briefly my problem.
My database is for our job card analysis.
The problem being sometimes a job card invoiced for the previous month
is only entered in the DB after reports have been generated/printed.
My thought was that if I could put a true/false check box in the record table
to somehow mark it as true after printing month end reports.
Hence late entries will reflect in the following months reports.
Is there a way of marking all the records as "reported" (True) after printing the report?
Maybe I am thinking along the wrong lines. Any suggestions?
Many thanks,
Brian.
Zimbabwe
View 2 Replies
View Related
Jul 10, 2013
I have a report that has only 2 columns (Routes and Carriers)
The report extends downward and takes up 3 pages.
I want all of the data on one page and when the data string extends to the bottom of the page, i want it to start over again at the top of the page (right where it left off at the bottom)
so i'd like it to look like the following all on one page
Route Carrier Route Carrier Route Carrier
AAA-1 Star AAA-7 Behnke AAB-4 Star
AAA-2 Titan AAA-8 LaidLaw AAC-1 Star
AAA-3 Star AAA-9 Star AAC-2 Titan
AAA-4 Universal AAB-1 Star
AAA-5 Star AAB-2 Star
AAA-6 Star AAB-3 Universal
View 1 Replies
View Related
Jun 12, 2014
I am having ACC2003 + win7.my Db Version is a calendar of dailyblog type Tasks.The Tasks are viewed by everyone in office having PCs.
Db Type is F.E+B.E type.
MY question is how to save a Report as Webpage Local on harddisk and that flashes updated information .
Example :
Report---> Local WebPage
SomeChanges done
Updated Report-----> Changed info Webpage
View 1 Replies
View Related
Jun 11, 2013
I have a report in access that currently works like the image Current Report.png.
I was hoping it is possible to make it look like the image in What I Want.png
More a spreadsheet type report that I can then print out.
View 9 Replies
View Related
Aug 28, 2014
I have a form with a Yes/No checkbox. Sometimes a data entry person will use this, sometimes an associated report is printed and a technician in the field will be required to fill check the box by hand and return the report for data entry. what I have tried to format the check box, if the box isn't already checked, I can't get it to show up clearly on the printed report. It's set to Visible, width 6pt, solid, black, always display, yet it still is barely visible. Ive tried increasing the grid line thicknesses, making it shadowed, nothing seems to work. Is there anything I can do?
View 9 Replies
View Related
Mar 19, 2015
Ok, I have pesky solid line at the bottom of one field (bottom of the field with 6.80 in it..
I cannot figure out where it has come from or how to get rid of it!
Here's the properties for that particular field...
When I delete the column it appears somewhere else...
View 3 Replies
View Related
Mar 15, 2014
I have reports that total the figures in a column and displays the total at the bottom of the column. I would like to display the total at the top of the column since the length of the column continues to grow and I would like to see that total before scrolling down to view the various individual entries.
No matter how I try the =count(x) always shows an error. Is it not possible to display the total figure at the top of a column instead of at the bottom?
View 1 Replies
View Related
Dec 21, 2013
Is there a way of formulating statistics at the bottom of a report?
Heres what i have.
The report pulls Rank, Last Name, First Name, Assigned weapon, Weapon qualification date. After 6 months i use conditional formatting to highlight the soldiers qualification date red. Im in the military that's why im tracking all this, but I need figures to report to higher, and at the bottom i would like it to show, "#Qualified", "#UnQualified","% Qualified", "% Unqualified", "#Expired","%Expired"
View 1 Replies
View Related
Jul 16, 2013
I have a sub-report and the last row is highlight, however, there seems to be extra spacing after the last row. I removed all report/page header/footer so all what's left is the Detail section but I still have this white space after the last row.
View 5 Replies
View Related
Apr 16, 2014
I have data from a survey with qualitative responses. For a single qualitative question, I moved the ID & responses into a new table and categorized the response according to a bucket/theme, where each column is a new bucket. I now have 10 columns. Each response is represented in 1 or more columns. I used an excel formula to copy the response data into the column itself.
Example:
A1 // B1// C1 // D1// E1//... L1
ID // Response // Cats // Dogs // Elephants //.... Column 10
1 // I like cats // I like cats //(null)//(null)// ... (null)//
2 // I like cats and dogs // I like cats and dogs // I like cats and dogs //(null)//..//
3 // etc.
However, now I'm realizing that Access always wants to show data for all records, or at most I can limit using a WHERE clause in my query.I want to use Access to generate this report:
1. Section 1: Show all responses from the Cats bucket where there is data
2. Section 2: Show all responses from the Dogs bucket where there is data
3. and so on
I know how to do summary values, and I know how to do filtering that apply across the whole report, but this seems like more advanced filtering, where I want to see selective details differently for each field.
View 3 Replies
View Related
