I have a single field in a table called "Client Contact", where users enter a semicolon between the name, address, and city state & zip. My reason for this was so we could copy client info with a single copy and paste (like from an email). But, on the final report, it needs to have these three parts split up into different lines, or even different textboxes. I can't find a way to do that.
View RepliesI have a Table of Special instructions. Each type of a Yes or No Text Box. There are 13 items in this table along with the ID key.
Each Field has a Special Description. I used the Y/N format for ease of use for user input to simply select the applicable options.
However, I need the text description to display on the printed report, which is not the problem.
So i created a separate text box for each item that simply says; If True, "Description", else blank. And named each one sp1...sp14.
So now, I want to take these text boxes with the proper descriptions and string them together.
My formula is: =Trim([sp1])&" "&([sp2]) etc.
This does produce the proper text results, however, and oddly enough, each item displays on its own line rather than in a string.
I get:
SP1
SP1
Instead of the desired result of SP1 SP2
This seems to simple, and probably has to do with the yes/no format. I've tried with and without (), and using + instead of &, and to troubleshoot, I eliminated the " ". No luck. Everything is coming back as a single column.
Is it possible to use find and replace to modify text in report design - or else is there something else I can do to get the same effect? I have a really useful report and I want to modify it for use with a different dataset. To do that I will need to change the text in over 150 text boxes. I have seven different fields which each occur over 20 times in the control source formulas in the text boxes, because they are used in different ways in different calculations. If this was excel I could do a simple find and replace to change e.g. every reference to fieldname OLD to fieldname NEW, but I cannot see how to do that within access report so am haveing to click on each text box in turn, go to properties and edit the text box .
I am trying to switch to a more general naming system in the modified report so then I will be able to assign data with the required fieldnames for the report within a query. But the report I am starting with has field names based on years 2013, 2014, 2015 etc.I want a quick way to change each reference to those field names to my more generic new field names.
I'm trying to set the control source for a control on my report that describes the number of portions that goes into a box. Sometimes there is a specific number of portions per box and sometimes it's a range. When the number of units is specific, then it is entered into the MasterCaseMinUnits Field. If there is a range of units possible than the min is entered into MasterCaseMinUnits and the max is entered into the MasterCaseMaxUnits.
I want my report to look at the mastercasemaxunits, if it is blank it will only display what is in the MasterCaseMinUnits field. If there is a value in the masterCasemaxUnits field, then it will display the masterCaseMinUnits & " - " & MasterCaseMaxUnits. this is the code I'm Using:
Code:
=IIf(Nz([MasterCasemaxUnits],[MasterCaseMinUnits])=[MasterCaseMinUnits],[MasterCaseMinUnits],[MasterCaseMinUnits] & " - " & [MasterCaseMaxUnits])
When I run my report, the control displays: #Type!
I have several combo boxes and textboxes showing quanity,productname,
size, and price. How can I pass all of this info in a single row that also calculates
the quanity and price. Also, multiple selections can be added, so several items can
can added in other rows. THe ability to cancel each row would be required as well.
Thanks
I'm trying to build an database for aircraft operators. I've got the basic tables structure and relationships but I'm stuck on building an search form to filter records by user input.I've got following controls on my form (unbound):
1. AircraftType (combo box) from tblAircrafts
2. CompanyName (combo box) from tblListOfAircraftsOperators
3. TeailNumber (text box) from tblAircraftOperators
4. AirportNameSearch (combo box) from tblAirports
5. PassengersNumber (text box) from tblAircraftOperators
6. ManufactureYear (text box) from tblAircraftOperators
7. SourceSearch (combo box) from tblInfoSource
8. CountrySearch (combo box) from tblCountry
9. CategorySearch (combo box) from tblAircraftCategory
10. EamilToOperator (text box) from tblAircraftOperators
11. InteriorPhoto (Bound object frame) from tblAircraftOperators
12. ExteriorPhot (bound object frame) from AircraftOperators
I need to enable users to search for aircrafts based on those criteria. As I mentioned I'm new to Access and I don't have any advanced coding skills. I have a query build to perform the search and this is the code I've managed to write so far:
SELECT AircraftOperators.RegistrationNumber, AircraftOperators.PassengersNumber, AircraftOperators.ManufactureYear, AircraftOperators.EmailToOperator, AircraftOperators.ExteriorPhoto, AircraftOperators.InteriorPhoto, tblListOfAircraftOperators.OpratorName, tblAircrafts.AircraftType
FROM tblAircrafts INNER JOIN (tblAirports INNER JOIN (AircraftOperators INNER JOIN tblListOfAircraftOperators ON AircraftOperators.CompanyName =
[code]....
Is there a function or query that I can split a field into different columns?
For example, I have First Name, Last Name, Address.
But I want to split the address field into Address1, Address2, Address3, Address4 as the initial Address field has a lot of characters with commas e.g. 11 London Road, Liketown, Likeshire, London.
So, I want to be Address1: 11 London Road, Address2: Liketown, Address3: Likeshire, Address4: London.
I thought that I can export the field using a simple query and then re-import it with using the text field into columns option, but it is time consuming.
there is a way to convert multiple text boxes to combo boxes all at once, rather than right clicking on them one at a time, and selecting Change to.
I have a form with about 50 fields and most of them need to be converted to combo boxes. I'd always done it manually one at a time up to this point, but I'm trying to build up my learning and look for smarter ways to do things.
I have a table field which long ago was merged from several other fields. When the data was merged into the field it was delimited by "1." then "2." up to "5."
Example: MergedField = "1.Animal 2.Large 3.African 4.Grey 5.Long Nose"
I now want to split it appart in a query where "1.Animal" goes into expression1, "2.Large" goes into expression2, etc.
I need to base the text on where the one number begins and grab everything until the next number in the mergefield is detected.
Can someone show me the syntax for this.
Thanks!
I have one field called FULL_ADDRESS. From that field I am going to populate two other fields. One called ADD_1 and the other, ADD_2.
In the FULL_ADDRESS field I have the following text :
"BOX 2747 ROCKY MOUNTAIN HOUSE AB T4T 1L7"
I want ADD_1 updated to:
"BOX 2747 ROCKY MOUNTAIN HOUSE AB"
and ADD_2 updated to:
"T4T 1L7"
While I understand how to do an update if I was using a space as a reference, i.e.
Trim(Left([FULL_ADDRESS],Instrrev([FULL_ADDRESS]," ")-1))
Trim(Mid([FULL_ADDRESS],Instrrev([A]," ")+1))
I can't figure out how to skip the first space from the right, and reference to the second occurring space, so that I get "T4T 1L7" to populate the ADD_2 field, and everything to the left of "T4T 1L7" placed in the ADD_1 field.
Hello everyone!
Here is my problem:
I have an Access database that contains a table with three columns (A & B & C). Field A is for code values and field B is for the value for that particular code. Field C holds the case number. I have a folder that contains the information for over 5000 case numbers. Each case number needs to be placed inside of the table. Considering there are 5000 case numbers, I dont want to use the import wizard 5000 times.
Furthermore, the text file only has two columns (for A and B).
I am trying to create a VBA that will append rows to the table by going into each file and placing the information into the table. The first row for each file contains the case number. So when the VBA runs, it should open the text file get the case number from the first row (field B on the text file) and place that in the case number field of the table for the entire file; and then repeat this action for all of the files in the entire folder.
Any help that can be provided will be greatly appreciated.
Thanks.
I am creating search boxes within that searches customer by lastname, phone number, address and suburb. Will I be able to use one search button for all of them or do they have to be individual buttons?
View 4 Replies View RelatedI have a report that has Bill to and Ship to addresses. They are positioned across from one another (ship to on the right and bill to on the left of the page). The issue is that the 'can shrink' doesn't work when there is data in the same field on the other address..
View 1 Replies View RelatedI have a form with 15 unbound text boxes (daily temperatures) and what I am trying to do after entering the temperatures into the text boxes the user clicks an add button which will add 15 new records into the temperature table
the code I have started off with is
Code:
CurrentDb.Execute "INSERT INTO ColdTemperatures (ProductID, ColdTempDate, Temperature) VALUES (" & Lettuce & ", #" & Me.RealTime & "#, " & Me.Lettuce & ")"
which adds 1 successfully however if i repeat the code above for all 15 this Im assumming will create a potential bottleneck and slow the system down
is it possible to add all 15 records at once? do you think Im going at this the right way
I have 10 unbound textboxes with the Tag Name "LoopID" in my report. I have to display the "PatientNumbers" field from the table tblPatient in those text boxes. Below is my code.
When I run the report, I get the error message: Run-time error '2448.' You can't assign value to this object and the code "Ctl.Value = rst!LCANumber" is highlighted.
Private Sub Report_Current()
Dim strSql As String
Dim dbs As Database
Dim rst As Recordset
Dim x As Integer
Dim Ctl As Control
strSql = "Select PatientNumber from tblPatient"
[Code] ....
I have 50 text boxes on a form. If any of them are ammended then I want a text box called CmdSave to become enabled. Is there any way I can do this without putting code under 50 text boxes on the change events?
The form is unbound.
Thanks in advance,
Recall.
I've got a table with 23 columns. Column 1 is the ID row which has a unique client ID in it. Then we've got a column called 1st_Reason and one that goes with it called 1st_Transfer_Date. This pair repeats for 2 through 10. Each of the Reason columns can have a set value, for example "First Processor".
What I need to do is create a date with months on the Y axis and the 5 different reasons on the X axis. I need to count the number of "First Processor" across all 10 Reason columns for each month. I would need to repeat that for each other reason type, but if I can get one to work I can simply change the reason type.
Here's what I'm using to count May's total:
Code:
=Sum(IIf([Current_Reason]="First Processor" And [Current_Processor_Transfer] Between #4/30/2013#
And #6/1/2013#,1,IIf([1st_Reason]="First Processor" And [1st_Transfer_Date] Between #4/30/2013#
And #6/1/2013#,1,0)))+(IIf([2nd_Reason]="First Processor" And [2nd_Transfer_Date] Between #4/30/2013#
And #6/1/2013#,1,IIf([3rd_Reason]="First Processor" And [3rd_Transfer_Date] Between #4/30/2013#
[Code] .....
I get wildly inconsistent results. On one of the types, it's only counting where it's the 1st_Reason. Some of the others return the same value regardless of which month I have selected.
Anyone have any idea how i would be able to export a single cells content (from a query) into a txt document without headers or extras?
What I'm essentially trying to do is view the cells content (which is in html) in a web-browser..
Any Ideas? Suggestions?
Thanks!
I have about 25 text boxes on my form that use the dcount or count functions to obtain a number. (Text boxes are labeled 'Text1' through 'Text25')
When the value of the textbox is 0, I would like to have the color of the text box turn red.
Is there a way I can do this using a for loop? Or a with statement?
Checking each one individually just seems like poor programming.
Any thoughts? Ideas?
Thank you.
The layout: I have form1 listed in continuous view. I have about 10 fields being listed. I have unbound text boxes for each field in the form header designated as a filter for each field.
Ideal world: Have each filter update records as you type. But I would also like for a "cascade" effect on the filters as well. Being that I can type in a few letters in FilterField1, and type in a few letters in FilterField2 and it would only display the records where the criteria is met for both filters.
What I'm not looking for: Only applying 1 filter at a time for 1 field. I have this setup now, but would like it to be more versatile allowing several fields to be filtered at once.
I am having trouble creating a chart within a report. Let me start off by explaing my report.
I have many unbound textboxes on my report that all have the code very similar to this:
" =Count(IIf([Complaints Table]![Month]=1,IIf([Complaints Table]![Decision - Our Favour? (Y/N)]="Y",0))) "
This basically gives a count of for a specific month. There are twelve rows of text boxes and two columns. There is a query applied to the report to input the year, as this is a yearly report.
What I want to do is link a chart to each and every text box to show the data in an easy to view format. But I can't seem to figure it out, and I've had no luck on the web .
I have a report and within the report I have added some text boxes with some simple logic such as sum, count, etc. These text boxes function well as long as the logic is referencing existing fields. The minute I try to have a text box reference another text box I get the "Enter Parameter Value" box pop up. I don't understand this as the text box I am referencing has a vaule based on what it is referencing.
Example: 1st text box control source =Sum([existingfield]) I get a value.
2nd text box control source =[existingfield2]/[1st text box] I get "Enter Parameter Value" of 1st text box.
Encountered this bug in Access 2010:
1) Create a table with a single text field
2) Enter some text values, including one which begins either "aa", "AA" or "Aa" (but not "aA"!)
3) Sort the field, and note where it puts the string(s) created in (2)
For me, they appear at the wrong end of the sorted list! I have tested this in Access 2007 and 2010 and it only happens in 2010. I'm using 32 bit Access on 64 bit Win 7 Pro.
How to trigger the below VBA Code under one Change() Event once a selection is made from the only combobox on my form.
Code:
Private Sub cbxAssociate_Change()
Me.txtFIRJuly14.Value = DAvg("FIR_Perc", "tblFIRStats", "[Associate]= '" & Nz([cbxAssociate]) & "'AND [Month] = 'Jul-14'")
Me.txtFIRAugust14.Value = DAvg("FIR_Perc", "tblFIRStats", "[Associate]= '" & Nz([cbxAssociate]) & "'AND [Month] = 'Aug-14'")
Me.txtFIRSeptember14.Value = DAvg("FIR_Perc", "tblFIRStats", "[Associate]= '" & Nz([cbxAssociate]) & "'AND [Month] = 'Sep-14'")
[Code] .....
I am trying to run a check that will make the user aware if the request they are adding via the form is likely to be a duplicate. If so I want the option to allow or reject the entry. Alternatively I have seen solutions that just notify on the form is something might be a duplicate, by highlighting a textbox red for example.There will be duplicates across these fields but there are many other options included on the form, as I said this is just an indicataion.
The table is called
"MainAc"
The form is called
"SDC Request Form"
The comparison fields are called:
"First_name" - Text
"Surname" - Text
"Change_Number" - Number
"Date_from" - Date
"Date_to" - Date
Ive been trying the Dcount() function, IIF() function but no joy.I tried to putting the below in the before update event, but it didnt run at all, now Ive put it on the button click acion that duplicates records for me, however it just returns a non duplicate responce regardless.
Dim PreviousRecordID As Long
PreviousRecordID = 0
PreviousRecordID = DLookup("first_name", "MainAc", "first_name<>" & First_Name & _
" AND surname=" & Surname & " AND change_number=" & Change_Number)
[code]...
This was a copy and modify from an example database but I dont entirely understand what each part does.
I am trying to improve a work process using an existing Access DB.We have a form with multiple texts boxes on it. I need to search through these boxes to determine the total number of occurrences of a specific value. This is not tied to a table.
The text boxes I'd be searching through all have related names: "Element0" to "Element40". And I'd most likely be looking for a "/" within the value in the boxes (value could be 12345/01, for example).Would then be using the result in VBA to apply some conditions, so I would prefer if I could do the count in VBA (the count/sum is the part that is hanging me up.)
I've found multiple ways to accomplish this from a table, but nothing for what I have to work with.I am unclear in my description of what I am trying to do, let me know and I will try to provide more information.