I am working on a project that is requiring me to hide a subreport that happens to be chart graph, when the chart has no data and my problem is that I cannot seem to get the report to properly hide and show the label behind it when the data is not there. I am in need of a SQL code that will read my blank record source as a zero instead of blank. I have tried Nz, IsEmpty, and IsNull and none of them seem to work.Here is the current SQL code:
SELECT DISTINCTROW Sum(Case_review.ID) AS SumOfID
FROM Case_review
WHERE (((Case_review.[Type of Issue].Value)="Clinical"));
Here is the current VBA code (which is in event on load) for the main report:
If Me.Rpt_Clinical.Report.HasData = -1 Then
Me.Label29.Visible = False
Me.Rpt_Clinical.Visible = True
Else
Me.Label29.Visible = True
Me.Rpt_Clinical.Visible = False
I have a query written that has two numbers. One is the trucking fleet size (63) and the other is the average number of trucks used over a time period (in this example, its 52.2)..I just want to create a pie chart that has 52.2/63. so the pie would be roughly 90% filled.
linking a report and a subreport (chart). I have uploaded my sample DB. I'm trying to chart all the individuals and three fields for each Home. Both report and subreport are using the same query for the record source. My charts are blank "All_Homes_Individual_Totals". Just use date range 05/01/14, 06/24/14 on my Main form page for the data.
My second question is how would you create a chart to pull by each individual with their monthly totals per Home using "qry_Community_ Inclusion_ All_Homes" with a report and subreport (chart) as above. Report would show the individual's totals by month for each home.
I have a popup form that prompts for a value and has a button defined with an OnClick,OpenReport with a WHERE clause. The value the user enters is placed in the WHERE clause.
The report is generated using a Query and the WHERE clause. I was very surprised -- it works!
Now I'd like to add a chart to the report that represents the information on the report. How can I do this without calling the query again? Can I somehow reference the information that's in the report?
I am having an issue with viewing a report. I have a button set up to show the print preview of the report. There is a chart based on the report's record source, and two sub-reports showing related data. The print preview section however shows the the chart area where it would appear is blank, i.e. there is a white area where the chart should go. There is no error message. The two sub-reports appear correctly. If I go to print the report, however, the chart appears, and it will also appear if I change the view type (e.g. to layout and back again).
I have a bar pivot chart made in a form this load fine, I have the below VBA code in place to control the bar color depending on what the bar show.
Set frms = Forms![OtherCases created by Indv by Month chart].Form.ChartSpace.Charts(0) Dim i As Long With frms For i = 0 To Forms![OtherCases created by Indv by Month chart].Form.ChartSpace.Charts(0).SeriesCollection.Count - 1 With .SeriesCollection(i).Name Select Case Forms![OtherCases created by Indv by Month
[code].....
When I then open the Report this is not working at all each bar just get a random color regardless what the bar show.how to convert the above to fit a Pivot chart form a form that is displayed on a report.
I have created a database that tracks production by individuals. I have also created a report which includes a pivot chart to give the user a chart view of production.
In the pivot filter of the chart I have associate names, where the user can click all, or individual associates, to see individual production.
The trouble I am having is when the user goes to print the chart, it will only print the chart with the "All" filter view. Even if the pivot chart is filtered to one associate, it will print like "All" was checked.
Is there a way to allow the report/pivot chart to only print the production for the individual who is checked within the pivot filter?
I've got a report, which on the screen is three chrts and a page break in between. Page is set up to print landscape.
When I print the report or save to pdf it adds a lot of pages in between 2 and 3. It seems to be of chart no.2 getting smaller and smaller. I've attached a copy of the pdf so you can see what I mean.
I have a query that has a field that reads DateReceived By Month: Format$([Workorders].[DateReceived],'mmmm yyyy') The criteria line is Like "*" & [Enter Month & Year (Leave Blank for all)] & "*" And this works when I run the query. If I enter october 2013 it shows only records for this date range like it should.
Then I built a bar chart report that will show the workorders only for the month entered. The problem is, If I leave this field in my query the chart does not update . When I open the chart it will prompt for the month and year but the data in the bar chart doesnt change. If I remove this field the chart updates as expected.
If I go into design view for the report and then right click on the chart and go to properties , then to row source, it reads as this:
TRANSFORM Sum([Workorders Query2].MyTime) AS SumOfMyTime SELECT [Workorders Query2].SerialNumber FROM [Workorders Query2] GROUP BY [Workorders Query2].SerialNumber PIVOT [Workorders Query2].[MXDPrinter];
If I click on the elipstical to go into query tools for this line , and click on run I get the error : The microsoft Access database engine does not recognize '[Enter Month & Year (Leave Blank for All)]' as a valid field name or expression.
So my criteria runs normally in the query and returns the correct records, but I can't get it to work in the chart .
This basically gives a count of for a specific month. There are twelve rows of text boxes and two columns. There is a query applied to the report to input the year, as this is a yearly report.
What I want to do is link a chart to each and every text box to show the data in an easy to view format. But I can't seem to figure it out, and I've had no luck on the web .
I know how to create a chart in an access report, put it in the group header or footer and link it such that the the grouping filters the chart.
My VP wants me to create a chart that compares each invididual providers episiotomy rate (something that is done to pregnant women during delivery) to the overall divisional rate on a monthly basis.
I know how to do this with 2 charts, ie 2 different group levels. One chart goes in the date grouping level (the overall rate) and another goes in the provider grouping level (the individual provide rate).
is there a way to have this in one graph in an access report?
I have a table that shows "DONE" and "REMAIN" for each "AREA" like below:
Code:
AREADONEREMAIN TOTAL AREA1100200300 AREA2200300500 AREA3200700900
Now I like to make a report that shows "DONE" and "REMAIN" in each AREA with pie chart, now I have problem how I have to do this job for the graph, how should be "row source" of chart control. What query needs on this table?
I've got a simple dataset that will ALWAYS have 4 rows, against which I have assigned the colours Green, Amber, Red, Grey. So I made a simple pie-chart to go on the report, but I can't work out how to assign the same colours.
Please see 3 attachments showing the current layout, the preferred layout (which I mocked up in Excel) and the chart settings screen.
The chart is working OK i.e. 4 slices appear and they are the right size, but when I open the chart, I see only East, West, North. So I am unable to manually set the colour for the 4th slice.
Using a Microsoft Chart Object 6.0 in an Access 2010 report. It's easy enough to do the basics and that chart responds to data.In my case, I have 12 lines, or columns, being controlled by data. It responds to the data. just fine. What I want to do is control the line weight and colour of each line through VBA.
You can click on the chart itself on the report form, but formatting the line you actually want is almost impossible. Pretending we can, you get the pop-up configuration windows and the TAB "PATTERNS". Under that, you can select "LINE" and then choose the style, color and weight. This is what I need to do in VBA.
Lines like this do not work:Graph_Data.Columns("A").Line.Weight = 5 or... objDataSheet.Columns("A").Line.Weight = 5I tried a variety of versions of that and am pulling my hair out.
I have a small clinic database. I've got tblAppointments to show AppointmentID and AppointmentDate among various other data, but only the dates matter for what I'm trying to achieve.
I'm trying to show a chart on a report that shows the number of appointments by months for this year and previous year. How can I do this...without using SQL, hopefully?
Here's what I tried: I made a cross-tab query to successfully show the years 2013 and 2014 in the rows, months in the columns, and number of appointments as values. But then, I didn't know how to graph it to compare the number of appointments for the two years by months.
I have created a chart report, but for some reasons, it only shows Sample data (East, West, North, 1st Qtr, 2nd Qtr, 3th Qtr, 4th Qtr etc). It is in Design View. If I do Print Preview, it looks fine.
How to have the Chart properly displayed in Design View?
Colm and Baxter, you've been great helps to me so far, and I will include you in the special thanks in my programming credits. I ask your help once more-
My program tracks how many calls are received per day at the office. I have a report showing a chart (thank goodness for wizards ) that lists the calls per day. This all works fine, and I was extremely proud of myself for doing so. However, after thinking about it, I realized that after a while, my client might not care to see ALL of the calls per day ALL of the time, and might wish to see maybe a week's worth or a month's worth at a time. I was thinking I could solve this by using a form to enter "from" and "to" information, but I'm not quite sure how to apply this so it would work with my report.
Also, if I can get this to work, on this same form I would like to have an option field that the user can select so that the usual options (today, this week, this month, this year, all) require only a click, rather than having to figure out what days are in this week (a tedious task, I know, but we're going for efficiency here ) but they also have the option of seeing specific dates they want.
The fields that I'm using for this are very simple- tblCustomer.CallDate and tblCustomer.LeadType, where CallDate is just a date and LeadType is a string from a lookup table that is either "Call-in" (the one I'm tracking) or "In-field".
I know this sounds like a lot of coding, but I'm sure if you could get me started, I could figure out the rest myself. It's just that the way Access does dates is so confusing to me, and I have midterms coming up and not a lot of time to figure this out by myself from scratch. Anyways, thanks for your help in advance!
I am editing a database that provides the option of creating custom reports, where the user can input a date range of their choice and receive aggregate data for that time frame. Although all of the numbers in the report are correct, I am having trouble with a chart that I inserted into the report.
Specifically, if the date range requested spans 2 calendar years (i.e. April 2014 through January 2015), the data for January 2015 appears at the beginning of the year (so the chart x-axis is for Jan through Dec, and the Jan 2015 data is showing up in Jan (as if it was 2014, not the end of the given range in 2015). When I try with smaller time frames within a calendar year, it adjusts just fine (i.e. shrinking the window so just March-May is displayed on the graph).
How to adjust the axis so that it properly records the data range- so that it would start the axis with April and end in January, for example?
So I have a text box in a report that I want to pull in data from a field in another report, so the 'control' for my text box looks something like this...
=[Reports]![rptSalesReceiptSub]![Text141] (i.e Text141 is the data I want to pull into my report)
...the path is completely correct but when I run my report I get.#Name? If I run the report that has the data I want, it's fine (in other words Text141 has valid data in it)
I have data from a survey with qualitative responses. For a single qualitative question, I moved the ID & responses into a new table and categorized the response according to a bucket/theme, where each column is a new bucket. I now have 10 columns. Each response is represented in 1 or more columns. I used an excel formula to copy the response data into the column itself.
Example:
A1 // B1// C1 // D1// E1//... L1 ID // Response // Cats // Dogs // Elephants //.... Column 10 1 // I like cats // I like cats //(null)//(null)// ... (null)// 2 // I like cats and dogs // I like cats and dogs // I like cats and dogs //(null)//..// 3 // etc.
However, now I'm realizing that Access always wants to show data for all records, or at most I can limit using a WHERE clause in my query.I want to use Access to generate this report:
1. Section 1: Show all responses from the Cats bucket where there is data 2. Section 2: Show all responses from the Dogs bucket where there is data 3. and so on
I know how to do summary values, and I know how to do filtering that apply across the whole report, but this seems like more advanced filtering, where I want to see selective details differently for each field.
My employer is using Windows XP Pro and Office 2003 (a few machines have Office 2010, but not mine). Furthermore, the machines are running the Japanese language OS, which has caused some comparability issues with my English XP/Office 2003 at home.
I have a form containing an unbound textbox, with the name MIS. The form's Current event has the following code:
If IsNull([[ResignationDate]) Then MIS = DateDiff("m", [NichiiGakkanStart], Date) + Int(Format(Date, "mmdd") < Format([NichiiGakkanStart], "mmdd")) ElseIf [ResignationDate] > Date Then MIS = DateDiff("m", [NichiiGakkanStart], Date) + Int(Format(Date, "mmdd") < Format([NichiiGakkanStart], "mmdd"))
[Code] .....
The calculates (correctly) the Months in Service of the employee who's information is being viewed.
Now, I am trying to create a report which lists the employees by work locations. The above , and other calculated information, is to be displayed in the report.
I used the wizard to create the report, using data from two different tables (employee & location).
I need to display the calculated information above for every employee at every location.
I posted the following code on a button (report to a first sergeant). I can't pull e-mail addresses from the report (rptLateByUnit).
=========
DoCmd.SendObject acSendReport, "rptLateByUnit", acFormatPDF, Me.CCF_EMail, Me.CCS_Email, , "FOUO: Open Personnel Data Discrepancies", "This document contains information which must be protected in accordance with AFI 33-332, Air Force Privacy Act Program, and DoD Regulation 5400.7R, DoD Freedom of Information Act Program; and Privacy Act of 1974 as amended applies. This document is For Official Use Only." & vbCr & vbCr & _
I've got a database written in Access 2010 that shows many reports. When the report is selected and data is available, it is shown as a full screen preview with the print dialog box displayed over it. However, I am having a problem in that when there is no data, a message box is displayed that's invoked from the 'on no data' setting but when it's dismissed the report is still displaying. How do I prevent this from happening?
