I've narrowed my problem to a subreport that prints multiple copies of the report based on the number of items generated in the subreport.
i.e. If I have an instructor registered to teach three classes in the subreport, the main report will print three time (identical). An instructor with two classes will print twice (identical).
No button...just good old "print" how? why? where?
I have a report with an embedded subreport. It's set up in two columns, ordered across then down.
My problem is when column 1, row 1 section is taller than column 2, row 1 section. It creates a lot of extra white space as I fill in the rest of the report. Is there a way to eliminate that space or am I stuck?
So I created a master report (in design time) and added subreports using VBA and now I get the components in the correct sequence, but how do I get the data to show up correctly because at run time the same query runs for each subreport component and I end up with the above sequence.
Defining the subreport query at design time won't work because then the subreport for a particular component will show the same data.
I need each subreport to recognize which data to show at run time - but I am not sure how to accomplish this.
I'm trying to stay away from duplicating subreports in the case where the same components are selected.
I am relatively new to Access. I am having difficulty summing up totals and bringing them into the main report. To be more specific I have two sup reports called WOExpenseTotalSubreport and WOServiceTotalsubreport. These two subreports are based off of queries that gather the description, price and qty of either services or expenses and then produces a "total" for me on the query.
When I bring these two queries into a report as sub reports I am able to Sum the "total" field in the subreport footer which works fine. What I would like to do is add those two totals together for a grand total on the main report. The two summed fields are called ExpensesSum and ServicesSum. It seems most things I have tried do not produce an expression error but the result is either #error or #name? Here are a few different scenarios I have tried both on the main report details section as well as the footer section.
I have a question related with a report i`m using to print labels. I am not familiar with Access and this is quite a challenge to do it alone.
In the attached file there is a report called "MICRA", when started it asks that you want to select (default is 1 and special select in this case is 11) and next it asks "SPS", the value entered there is printed in the bottom right corner of the report.
My question is is it possible if in the SPS field is entered a special value (for example "MASS") to print 30 labels of each selected label with text in this fiels = "val.1"; 15 with text in the field = "val.2"; 10 with "val.3" and 10 with "val.4" and after that to print next label with same rules...
And if not entered "MASS" to print just 4 copies of every label.
Here is my delima, I have a report that I am able to type in a keyword and it will pull up that report exactly as I type the keyword, however, let's say that I want to pull up someone else's report I cannot. I have to exit out of my report and then go back into it and resubmit the new search.
I have created a query with parameters and a report from the query. The report is requesting the paramater multiple times but the query is running fine. How to resolve? Again, the query requests the parameter once but the report multiple times (6x).
I have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.
1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)
2. If user presses the Print button before pressing Save button then system should prompt user.
Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):
Private bSaveClicked As Boolean Private Sub Form_BeforeUpdate(Cancel As Integer) If Not bSaveClicked Then MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation Cancel = True
Every month, I create 15 individual reports with each report filtered by two fields, let's say Dept and Exec. You change Dept and Exec via a combo box drop down based on a table, and this information is passed to the query behind the report. Now, I repeat this process for every report. I use an unbound form that gathers the "Title", which is the Dept Name +"Special Report"; report Date using "as of" [DATE], and an updated through [Second Date].
Each monthly set of reports is sent to a new directory and folder (i.e. M:MOR Reports2005January. This changes each month. Somehow, I'd like to automate this where each report prints with its name to a newly created folder in pdf format.
I have been reading prior posts and am coming up with some ideas like adding a "selected" field to the Dept/Exec table and then step through those selected records to determine which report you are running. It takes a long time to print these to pdf in a new directory every month.
how to print mutiple "invoice-records"..I want to print multiple times the same report but with different values ex. invoices (based on a query). I have the report and the queries ready but how can I automate this task?
In access database we register the following fields:
Company name - Address - Artickle - Number of copies
We then want access to print a report with these informations, except for the number of copies, which should be the number of duplicates that is to be printed.
I have a class roster and need vba code to print a first day package of forms. I want them to print each person's package then move on to the next person until the roster has printed each person's package.
I have a report with several subreports that occassionally grow. I also have several fields that don't grow. If my subreport grows, it moves any other fields down as well. These are fields that are below the subreport, but not beneath it (e.g. on a lower line, but to the left).
Is there any way to keep the other fields stationary?
I'am working with tables of loan associates, customers, companies and States versus numbers and amounts in my report and I want to create a main report with a subreport within it which shows the number of customers and their respective state that a loan associate has either written a new loan or serviced that customer and a total for each loan associate? Is there a report template out there that could address this for a complete report?
I have a production report with 4 one to many sub reports (material reworked, reclassified, rejected, and issued). Each of those sub reports has a sum field totaling up the material reworked, rejected, etc for that lot.
I need a calculated field that subtracts the totals in each sub report from the reported amount produced in the main report.
Should I do this with a calculated field on the report. If so how would I reference the summed fields in the sub reports?
Or should I put a summed field of the amount reworked, rejected, etc in the query the report is based on and make a calculated field off that.?
I am trying to create a two-page report. I used a document entitled "Sophisticated Reports: Multiple Columns and Subreports" by Rich Gorvin to get where I am now. I created two (2) separate tabular subreports representing each page then placed them into a master report using a common group header as suggested in the paper. While the two (2) separate subreports print out in the desired tabular format, they do not do so in the master report document. The first page prints out just fine but the second page prints out each line of the table separately.
I am attaching a word document of the form I'm trying to re-create in Access.
In my database, I have a report called "rptEventsbyEmployee" and in that a subreport called "sbrptEventsbyEmployee". The master/child link is the employee name. Everything is fine until you get to page 3 where the subreport shows twice.
I have a database (Access 2007) that handles a large number of consultants. Each consultant has a number of skills, has worked in a number of countries, and speak several languages. As contracts come in, I wish to generate a report based on the skill set, language and country/countries that best suits the contract; thereby identifying a group of most suitable consultants. I have designed a report with three sub reports for skills, languages and countries. Each sub report is linked to the main report through Link Master/Child fields using the ConsultantID. That's all fine; I get a report showing all consultants listing all their qualities.
Now, I want to be able to filter the sub reports on the three aspects: Skills; Countries; and Languages.
In the past, for other applications, and with the unfiltered form in preview I have used a popup form with unbound Combo Boxes to generate a string to use in the reports filter. I think I got that technique from Allen Browne, and it has really served me well.
Now, however, I can't use this technique since I can't set the filter for the sub reports. I thought that I might be able to use the Link Master Field with text boxes on the main report, but haven't managed to figure that out.
I have created a report that includes 4 subreports. The subreports are displaying survey results from 4 different survey channels. New survey data is added to the tables monthly so the subreports will grow in size. Is there a way to have the subreports automatically resize and push down the subreport below? Currently what is happening is a subreport will grow and the additional data disappears underneath the next subreport. Is there a better way to create a report that displays information from multiple reports that will change in size?
I have three reports that I have used as the subreports for one master report. The master report shows the three subreports on a page.
When one or more of the subreports contains no data the master report still shows the empty subreport. I would like subreports with no data to be left off the master report if this is possible.
For each of the individual subreports I have used the On No Data event to display a message and then not open the report if there is no data. This works fine for the individual subreports but when I open the master report the "empty" subreport is still displayed.
Is there a way to leave the subreport off the master report when there is no data in the subreport?
what i have is a form (image attached) and i need to be able to select any combination of parameters (including state, zipcode from GENERAL, i.e. referring doctor last name from RefMD, Drugname from Drugs, Diagnosisname from Diagnosis, and VisitType from Encounters) and filter PatientForm where all the selected parameters are true..
I am working on a report that will have 16 sub-reports, one right below the other. Because of the complex nature of the calculations in the groupings it seemed easier to "build" the report using vba rather than using the report's built-in grouping ability. The issue I am running into is that there seems to be no simple way to control the height of the sub-reports. I had hoped that setting "can grow" to yes would change the height of the sub reports and move all subsequent sub reports down (Allas)
As an alternative I thought too that I might be able to set the height of the sub-report control, which would make for a tricky but not impossible bit of programming, but (Again allas) I can't seem to find a reasonable way to determine the required height of the sub-report's control.
I have forms that are printed based on a query parameter of [enter item number]. There are several of these forms that I would like to print at one time (with one command) making it easier for the user to gather their information at the beginning of the day. I also don't want to lose the ability to print them out individually as we do now.
I have an unbound form with an associated report. When the user hits the 'print' button on the form/screen, the report is launched in the background. In the On Load event of the report I populate the report fields from the forms field as so:
This works like a charm as long as I call the report in Print Preview mode (i.e. with acViewPreview). But if I send the report directly to the printer, none of the fields print.
I've read about using other report events to populate the fields (e.g., On Format and On Print) and also something about using TempVars to pass the data. But I haven't read anything that's clear and definitive about the full answer.
I am still trying to get a hang of development in access 2010.
I would like to design a form with a listbox or a combobox which holds all 8 of my reports (a table has all the reports), with a Print and a Preview view buttons. In addition, the user must be able to select if they want to view the report by month, quarter and the year in question.
How do i have a specific report print or previewed based on the value selected in the listbox or combobox and the date criteria.