I have a set of records that contain the following attributes;R_Name, Cost, StartDate, EndDateI need to subtotal the cost for each R_Name by year. The start and end date attributes can span several years and I need the correct cost for partial years.
View RepliesI'm trying to subtotal data in an excel file but I am getting a subtotal method of Range class failed in the red text below. I have been trying to get this to work with no success.
Code:
Public Function SUMMARY()
Dim xlApp As Object
Set xlApp = CreateObject("Excel.Application")
With xlApp
Dim wb As Object
[Code] .....
I am trying to pass a date range parameter & an additional parameter (Type of Audit) to 6 subreports based off individual crosstab queries and housed on one Unbound Report ("rptFinal").I have an Unbound Form "frmDate" passing a date range and Type of Audit using [Start Date] and [End Date] to rptFinal with a button that simply opens the rptFinal as follows:
stDocName = "rptFinal"
DoCmd.OpenReport stDocName, acViewReport
In each Crosstab query, I have set the parameter criteria (in both the Parameter section & the query itself) to:
[Forms]![FrmDate]![Start Date] And [Forms]![FrmDate]![End Date]
and also,
[Forms]![FrmDate]![Enter Type of Audit]
On each subreports On Load Event, I have added:
Private Sub Report_Load()
Me.Filter = "[DteAuditDate] BETWEEN #" & Forms!frmDate![Start Date] & "# AND #" & Forms!frmDate![End Date] & "#"
Me.Filter = "[Type of Audit] = #" & Forms!frmDate![Enter Type of Audit] & "#"
End Sub
and I've set the Filter On Load property to: Yes..I can open frmDate, fill in the date and Type of Audit, launch the report and it runs with no error, I have 6 blank subreports in report Preview. The headers are showing up but none of the data.
I have a report called rpt_date_range it is based off of the query qry_date_range.
qry_date_range has "Between [Start Date] And [End Date]" in the criteria for the date field.
In the report header, I have the title "All records from [Start Date] to [End Date]"
What I want to do is to take what is entered into the [Start Date] and [End Date] and put that into the title in the report header. At the moment, I don't know how.
Thanks in advance
Hello All,
I am trying automate some report printing.
I have around 20 reports most of which require a from date and a two date.
If I use the code below, it asks for the from a two date on each report print, but the dates are always the same.
Is there a way of take a two date and a from date at the start of the sequence and insert it into each reports date range prompts?
Private Sub btnME_Click()
MsgBox "Please note, this process can take upto 5 minutes to complete."
DoCmd.SetWarnings False
DoCmd.OpenQuery "qry1"
DoCmd.OpenReport "rpt1", acNormal
DoCmd.OpenReport "rpt2", acNormal
DoCmd.SetWarnings True
MsgBox "Reports have been printed, aggregated results have been inputed into 'workstats_automated.xls'"
End Sub
When I run my query that has a MINDATE and MAXDATE column, i can see the full range of call dates. The earliest date is 06/04/2013 and the latest date is 06/19/2013.
When I run a report with text fields of MINDATE and MAXDATE off that query the range shows as 06/04/2013 to 06/04/2013...
What I am trying to accomplish is for the report to express the range of dates. the report asks the user to enter a beginning date and an ending date for their search and I want them to know the actual range. The data appears to be accurate but the dates don't work.
The data the query pulls is employee name, course ID, course name and course completed date. I have added criteria in the query that asks for the Course ID to filter on a given course and a dynamic field in the query AnnualReqDate: DateAdd("d",+365,[TrainingCourseCompleted]). What this returns is a list of employees that have completed course X the date they completed and the date (12 months) when the course is due. This works great, have created a report that reflects this very well.
The issue comes in when I try to add the ability to filter by date range on the AnnualReqDate dynamic field. the AnnualReqDate dynamic field does not exist until the query is run the Between [Start Date] And [End Date] criteria add to the AnnualReqDate dynamic field wont work.The query fires off but returns zero records.
I have a report, based on a query, where the field name is "Date of Work". The criteria in this query field is >=[Start Date] And <=[End Date], which works fine. However I need to have the start and end dates to show in the resulting report header based on the query.
View 1 Replies View RelatedI would like to create a excel file to let the user to input the following column.
Date No. of success No. of failure
==== ============ ==============
" " "
" " "
" " "
I would like to have a function that can allow the user to select the date range and its total no. of success and no. of failure. For example , the user select from 31-03-2001 to 31-12-2012 , then output the report which show the total no. of success and no. of failure in this date range , is there existing tamplate that I can use ? if no , what is the simplier way to do it ?
If the data is very large , I want to create a access db to store it, how to do it ?
I have a report based on a query that returns all info from the query which is fine, I now need to amend this so that individual users can specify the date range to be queried and the person for whom the results are required (one of the query strings)...
View 1 Replies View RelatedWhat I have is a single table that I need to create a report from. It has vehicle unit numbers, dates of service, repair details and costs. I am trying to generate a report where I can select a unit from a combobox and enter a date range.
View 1 Replies View RelatedHow to keep Access from including the detail line items in my report total?
Below is a quick image of part of the report.
The report is compiled from two tables. The first table has detail information on each line, in four columns:
State Name Amount Quantity (Not used)
AL Store 1 313.94 60
AL Store 2 12.59 1
AZ Store 3 576.45 90
CO Store 4 172.22 24
CO Store 5 502.25 88
The 2nd table is a summary by state with three columns:
State Amount Quantity (Not used)
AL 326.53 61
AZ 576.45 90
CO 674.47 112
I'm trying to make the report group by state, then name, amount and a subtotal for each state. This all works fine in the report.
I want to also add the amount field from the 2nd table (State Subtotals) to the report just for reference. I've managed to make this work as well. (See State Total on image)
The problem that I'm having is that when I try to do a final total of the State Total column in the report footer, it seems to add the (State Subtotals) amount field on every detail line (See red numbers in picture. they are not actually on the report, but Access thinks they are and includes them in the final total).
So far I've tried different joins, hiding various fields, sub reports, ect. I just can't figure out how to stop Access from calculating the detail lines.
I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.
I have tried
Code:
Between [StartDate:] And [EndDate:]
And
Code:
Between [StartDate:] & "00:00" And [EndDate:] & "23:59"
Neither of which work ....
Is there a way to show the earliest and latest dates of a report generated by a non-date field?
E.g. I generate a report based on Food, and it'll list the days that this food is associated with. Is there a way to show the first and last day that appears in this report (i.e. the range of dates that the report shows based on the food selected)
I have some code that filters job raised I have 2 text box's txtdatestart and txtenddate after entering. date range between the too text boxs it shows me all job raised with in the period.i have entered what I would like is filter it again by client field using combo box cboclient so if the user enter's client name in cboclient combo box and date range in txtdatestart and txtenddate it will only show jobs raised with in the date range of the client enter in the combo box but if the combo box is empty show.
Code:
Private Sub cmdPreview_Click()
'On Error GoTo Err_Handler 'Remove the single quote from start of this line once you have it working.
Dim strReport As String
Dim strDateField As String
Dim strWhere As String
Dim lngView As Long
Const strcJetDate = "#mm/dd/yyyy#" 'Do NOT change it to match your local settings.
[code]....
I am trying to filter out information for an ODBC query I have written, to obviously make it more concise. Because our data is not set up very logically, a lot of my queries are based on text...but that is another story. My current situation starts with a simple make-table query finding certain data within a date range. This is followed up by another simple make-table query to find other specific data within another specified date range. Then I have a cross-tab query between the two tables to locate all the data that shares the same unique identifiers. My problem lies with trying to only pull information from a certain date range. For example, I want information to be included if the data has the same unique identifier as well as falls within +/- 7 days of the received date (dd/mm/yyyy) also listed in one of the tables. Each record will likely have different received dates so I cannot set it as a constant.
Make sense to anyone? I am not confident enough to play around with some expressions...well it is more I haven't been successful at using them correctly.
All help is greatly appreciated.
Thanks,
Jay
I Have a table that I collect data for numerous ID's. One ID may have 5 dates that is was serviced. It is due to be serviced at set intervals which is calculated from the most recent service date. I'm calculating the next service date in a text box with the DateAdd func. =(DateAdd('m',[Cal Freq],[MaxCalDate])) with the MaxCalDate being a Max func in a different text box for selecting the most recent sevice date. I'm trying to update the [Next Due] field in the [Master Asset] table with the calculated next service date so I can do queries on items that are due service within a date range. If I do an Nex Due Expr1: in the queries to calc the next due service date then do a criteria on that Expr1: such as >=[Start Date] And <=[End Date] it states datatype mismatch? Is there a way to select a requested data range on a calculated type date/time? Or How can I update the [Next Due] filed in a different table?
View 8 Replies View RelatedFor example, I have 1 table with 3 fields : Name, Birth date, Gender. Then I want to create a report where all data are grouped by age range and gender
View 1 Replies View RelatedI am trying to generate a report from a select query using the report wizard. The wizard is showing the error of subscript of out range. What is the reason and how can be rectified?
View 4 Replies View RelatedI have been stuck trying to write an expression that will calculate the Yes values in a range of 16 Yes/No fields.
I have attached a screen print of the report I am working on.
I'm trying to figure out how I can set a parameter on my query to search for any activity that occurs within a month, that falls within a date range. Specifically:
Criteria TextBox: 4/2006
Activity Start: 3/6/2006
Activity End: 5/5/2006
I want this activity to show in my query because the time between start and end occurs during the month of April. It's no problem setting this up for a specific date, ie 4/1/2006, but I don't know how to do it for an activity that occurs all days between 4/1/2006 and 4/30/2006..or for one that starts 4/12/2006 and ends 4/18/2006, or starts 4/12/2006 and ends 5/9/2006. etc.
Hi All,
I have a table of data, one of the fields is a date.
What i want to do is be able to have a query that can check if the date falls within a certain range - ie fiscal year and output in another column the fiscal year "code".
Ie: dates between 01/06/05 and 31/05/06 is fiscal year 0506
dates between 01/06/06 and 31/05/07 is fiscal year 0607
Could this query be dynamic so if a new fiscal year begins it would know to make the output the next fiscal year code???
Any help is much appreciated.
Cheers
Rudi
I have two tables: tblClasses & tblSchedule. There are joined by ClassID. For each class in the tblClasses there are several records with date field in the tblSchedule. (So each class stored in tblClasses happens on multiple dates stored in tblSchedule).
I want to create a query (SQL view) that would take two date inputs from a form(date range): datefrom & dateto, and return any class of which FIRST day of classes falls in between those dates.
(Or: how can I add a field to my query called [First day of class] that would basically have the value of the first date from the tblSchedule for the joined classID?)
I need to get records between two dates. Here is my query:
SELECT WGMAHIST_TIMEDTY.TDYPT, WGMAHIST_TIMEDTY.TDYCO, WGMAHIST_TIMEDTY.TDYSSN, WGMAHIST_TIMEDTY.TDYFND
FROM WGMAHIST_TIMEDTY
WHERE WGMAHIST_TIMEDTY.TDYSSN = 464299266
AND WGMAHIST_TIMEDTY.TDYEDT >= #06/29/2007#
AND WGMAHIST_TIMEDTY.TDYEDT <= #09/21/2007#
AND WGMAHIST_TIMEDTY.TDYPT = 1
AND WGMAHIST_TIMEDTY.TDYCO = 8
I am obviously doing it wrong because I keep getting an error that complains about the key work BETWEEN.
How can I make this work? I am using MS Access 2007.
Thanks,
wgma
I have a form with a combo box containing the names of the Months. What I want to do is then pass the Month name to a query as a date range. For example, select "May" from cboMonth and the query will check the date field for "between 05/01/2008 And 05/31/2008"
Here is what I have in my query but it does not show any records when I run it:
IIf([Forms]![Form1]![cboMonth]="May",Between #5/1/2008# And #5/31/2008#)
Is it even possible to use this type of an expression in the query?
Thanks......
Hello - I am trying to create a FOrm that will allow the user to type in two dates. From these dates a table will be created and displayed in a List Box.
Does anyone have a very simple example of the code
1. I am trying to write two input boxes to variables.
2. On click I am displaying a message box that repeates the values of these two variables
3. When they hit OK I want the records to appear in the ListBox.
4. From this point I will want to get the data to a report of some kind.
I am very new to this and am trying to see if someone has any code examples....
This is the code I have so far.....Actually I cant get passed #2 above. It shows the message box and the text but not the values of the variables...
I dont think I am using the variables right......I dont understand the syntax needed to write an input box value to a variable......
Please Help....
THanks
CODE:
Option Compare Database
Private Sub BeginingDate_BeforeUpdate(Cancel As Integer)
Dim BD As String
BD = BeginingDate.txt
End Sub
Private Sub EndDate_BeforeUpdate(Cancel As Integer)
Dim ED As String
ED = EndDate.txt
End Sub
Private Sub Command5_Click()
Dim var_BeginingDate
Dim var_EndDate
var_BeginingDate = BD
var_EndDate = ED
MsgBox "The Variable is " & var_BeginingDate & " and " & var_EndDate, vbInformation + vbOKOnly
End Sub