I have a report that was created on my computer. When this report is opened on other computers (2 that I've tried) the text alignment is way off. Originally I thought it had to do with printer margins dictating something but that is not the case as the margins remain identical on all computers. It's not a font issue because it's Arial which all computers have. The text is written inside a "label".
View RepliesHi All
I dont have room on my form to read a text box from left to right so can it be rotated? so i read the text from bottom up as you can do in word text boxes or excel cells?
regards in advance
I have a series of Unbound control boxes in one row. some text extend to two lines and I want everything to be centered both horizontally and vertically.
Can't figure out how to vertically align the contents of the controlb boxes...
I have created a form and want to turn the text in a header to a vertical read. I have tried all I know even pasting from excel and it just stays horisontal? Any help would be great.
View 2 Replies View RelatedI have a multicolumn listbox on my form. It works, but the second column is an amount, and I would like that column to be right-adjusted. Is there a way to do that?
Thanks,
David
Well...here's the deal. Four computers were replaced in our office and now three of them are having problems with the database. The database is written in Access2003 and all computers (the old ones and the four new ones) are running on WindowsXP Professional w/ Office 2003.
The problems that comes up only involves reports (viewing, email, exporting). When they try to view a report, a message comes up
Cannot find object ".
When they try to email or export a report the function is cancelled due to the error.
I'm going to have the computer admin re-install Access to see if that helps.
I've been searching around trying to find some info on various settings that would cause this, but I'm pretty ignorant in this arena. I checked the references in Access and they are both the same. That's about the extent of my knowledge in thise area.
Any insight would be great.
Thanks for the help.
BB
I have a form with many fields on it. For some reason some of the text in the form fields don't line up vertically with other text even though I have aligned them to the grid and to each other. I have Access 2013.
View 14 Replies View RelatedI design/maintain an Access database for a friend's business using my home computer. The printer he uses allows for much smaller margins than mine does, so anytime I edit a specific report that uses very small margins, my computer automatically increases them to the minimum margins my printer allows and when the business owner runs the report on his computer it spills on to extra pages.
Right now every time I make a change, I need to go directly to his computer and adjust the margins within the report after the new front end is uploaded.Is there any way around this, such as telling Access to ignore the printer's minimum margins?
I have a report (Access 2007) with subreports that is being exported to pdf. It all works fine on PC except for on a virtualbox and a laptop. When the user exports the report to pdf, it leaves some subreports blank! If the report is opened in the DB it pulls data as it should and all looks fine.
In the report, the missing data is from 4 subreports in the same top section of the report where a 5th subreport also resides. Subreport 5 is displayed OK. There is no dynamic formatting nor filtering in the reports.
These two machines had to have the 2007 Microsoft Office Add-in: Microsoft Save as PDF installed for the PDF export to work at all. Both machines are up-to-date on the latest windows updates. The virtual box runs XP while the laptop runs Windows 7.
This is the strangest error I have ever encountered as it only partially fails and it cannot be replicated on a regular PC.
G'Day again everyone,
I would like to justify everything so it is in the centre of the cell in the datasheet. Can this be done?
Also is there any way that you can wrap text in a text box?
Thanks a lot - Elliot
:confused:
is there any way you can align text and data within msgbox's, with vbtab etc.
i suppose its a matter of forcing several text strings to occupy a similar length of screen real estate.
can you achieve this in a msgbox?
While using list boxes i noticed that numeric fields were getting left aligned in the columns. Is there any way to get them right aligned ?
View 2 Replies View RelatedI have a program thats work perfectly in some computers useing the network but when i try to open it in other computers i get an error and when i try to debug the error it highlit the line that i am calling the micro that open the mainform in it, i hope some one have an idea for what is going on with the program
View 12 Replies View RelatedHey, My access database will be used to make computer reservations for an internet cafè. The user makes their reservation date by using a calendar control, they choose their start and end time, and they also choose the amount of computers they can book (no more than X). Would it be possible to create a query that will limit the user from overbooking the computers?
View 14 Replies View RelatedI created the database on my computer. I added security and split the database to put the tables on the the server. Everything works just fine on my computer. However, when I try to copy the 3 files for the front end of the database to other computers on the network, it won't work.
Perhaps I'm confused as to what files need to be migrated to each additional computer or I don't have the security setup properly.
Right now, I move 3 files. The main database file with the front end. The shortcut file that is created when you add security and the security file that is created when you add security to the database.
I'm stumped.
I have a report that has Bill to and Ship to addresses. They are positioned across from one another (ship to on the right and bill to on the left of the page). The issue is that the 'can shrink' doesn't work when there is data in the same field on the other address..
View 1 Replies View RelatedI have a single field in a table called "Client Contact", where users enter a semicolon between the name, address, and city state & zip. My reason for this was so we could copy client info with a single copy and paste (like from an email). But, on the final report, it needs to have these three parts split up into different lines, or even different textboxes. I can't find a way to do that.
View 1 Replies View RelatedIs it possible to use find and replace to modify text in report design - or else is there something else I can do to get the same effect? I have a really useful report and I want to modify it for use with a different dataset. To do that I will need to change the text in over 150 text boxes. I have seven different fields which each occur over 20 times in the control source formulas in the text boxes, because they are used in different ways in different calculations. If this was excel I could do a simple find and replace to change e.g. every reference to fieldname OLD to fieldname NEW, but I cannot see how to do that within access report so am haveing to click on each text box in turn, go to properties and edit the text box .
I am trying to switch to a more general naming system in the modified report so then I will be able to assign data with the required fieldnames for the report within a query. But the report I am starting with has field names based on years 2013, 2014, 2015 etc.I want a quick way to change each reference to those field names to my more generic new field names.
I'm creating a tabbed form in Access 2007, and in the first 3 tabs, when I dragged the field controls onto the form, they stretched to the width of the form and all stacked nicely underneath each other.
Now on the next tab they are coming out as much smaller. I don't want to stretch them to fit as I want them a uniform size and I just want to find how to get that setting back! I've been messing with the anchoring buttons to what seems like no avail!
How can change column color in list box and also how to make alignment left or right for cells data.
View 1 Replies View RelatedHello All,
I have MSAccess ade working in some computers which has WindowsXP-pro(SP1 and SP-2) without any problem. But It doesnot work(When i said it doesn't work means it doesn't work in certain parts which i will give an example) in some computers that has exact same configaration. The problem is when I try to instance a class using a TypeName function, it doesnot recognize the class name and just returns an object rather than recognizing the class's name. Its a strange thing because I have some .ade from past works fine in all machines. The only difference is In the new .Ade is I have included the Microsoft outlook 11.0 object library. But the part of the code thats not working doesn't even use the Outlook library at all. So did anyone has this kind of problem, PLease suggest or ask me if you have more details of this problem. I really appreciate your help.
Thanks again
ds111
Hi,
Hopefully this is a really simple requiring a simple answer.... hopefully
On one of my forms I have a combo box thats values are generated by a parameter query. On my computer and a couple of others i tested it (on the same network) this combo box populates fine, but i put it on a couple of other computers today and it doesn't show any values. I checked and the query itself runs fine, plus a combo box that runs off a table populates fine.
not too sure if its relative but the database is split with the tables sitting on the network share and the database sitting on the main computer. or perhaps this could have something to do with blocking unsafe expressions.. i am not sure
any help on this would be greatly greatly appreciated
I have 2 tables tblComputers & tblComputerAllocations
tblcomputers has 85 records & tblComputerAllocations has 71.
I would like a query that returns the 14 computers that have no allocations.
I tried a union query on field ComputerID but i must misunderstand its use!!
Thanks in advance,
Phil.
Does anyone know/how my forms' background colors are different from one computer to another? The computers that are showing the correct color are both XP and Access 2002 (one is a laptop and one is a desktop)... but then someone else.. on a laptop (with XP and access 2002).. the forms' background colors are not good (purple)... vs. blue on my laptop and the desktop. Thanks!
View 3 Replies View RelatedI have a report that lists incidents for a specific day (reference number, a brief description and a few other fields). There is also an additional notes field, which I would like to be viewable from within the report.
For example, as a tooltip when the mouse hovers over the brief description text box. Or displayed in a textbox on the right (I don't want one textbox per line though, but instead a single re-usable textbox). Or a more information button/link that shows a "popup" containing the additional notes. I don't want to exit out of the current report, but stay within it.
I have tried to achieve this with a tooltip, but in fact even when I manually typed in a tooltip on the control's properties it wasn't displayed when I hovered over the text box.A pop-up or floating textbox would be preferable.
is it possible with transform, only uppercase text contained in a report textbox, to bold? How? Through VBA?....
View 1 Replies View Related