I have an unbound combo box on a report that looks up to a table of address data.I have a specific requirement where if one of the bound fields on the report is a specific value, I want the combo box to show data. If the bound control on the report is a different value, I want the data in the combo box to be different.
I have tried using the OnOpen method, but it says I cannot assign a value to it.I have tried using the OnLoad procedure, but it doesn't show anything. the code is as follows:
Code:
Private Sub Report_Load(Cancel As Integer)
If Me.[Dispatch Type] = "Sent to A" Then
Me.cboDispatchTo = 15
ElseIf Me.[Dispatch Type] = "Sent to B" Then
Me.cboDispatchTo = 8
End If
End Sub
I have this on two slightly different reports, where only one line of the report is different. One report works fine, no problems. All the data is there. But on the second report I get the dreaded #Name? error.
I have two numeric fields which make up what looks like a full decimalised number ie 20.22 - only I am unable to put the decimal point in between the two numbers.
I thought about putting in an unbound object such as a picture of a full-stop but cant get it anchored at the correct angle to make it look convincing in the report.As this is such a huge database I have tried to amend the tables, but it loses vital data ?
I have 10 unbound textboxes with the Tag Name "LoopID" in my report. I have to display the "PatientNumbers" field from the table tblPatient in those text boxes. Below is my code.
When I run the report, I get the error message: Run-time error '2448.' You can't assign value to this object and the code "Ctl.Value = rst!LCANumber" is highlighted.
Private Sub Report_Current() Dim strSql As String Dim dbs As Database Dim rst As Recordset Dim x As Integer Dim Ctl As Control strSql = "Select PatientNumber from tblPatient"
I have a report [Report1] that gets its data from a query [Query1]. On [Report1] there is an unbound text box [EnterEndDate] that I want to use as a filter for the report criteria, and have it filter the report to show every report row with the value in the [EndDate] field greater than what the user entered in [EnterEndDate].
There is no need to save the value used in [EnterEndDate]. It will be entered after the report is run and changed on demand while the report is open for the user to see different date ranges.
I have an unbound form with an associated report. When the user hits the 'print' button on the form/screen, the report is launched in the background. In the On Load event of the report I populate the report fields from the forms field as so:
This works like a charm as long as I call the report in Print Preview mode (i.e. with acViewPreview). But if I send the report directly to the printer, none of the fields print.
I've read about using other report events to populate the fields (e.g., On Format and On Print) and also something about using TempVars to pass the data. But I haven't read anything that's clear and definitive about the full answer.
When I open the report on XP/Access 2007, it works just fine.
When I open the exact same accdb with a Win7/A2007 machine, the report does not open. If I debug and display the error, a msgbox appears "The OpenReport action was canceled."
I have other bound reports and those open with XP/A2007 or Win7/A2007 just fine.
It makes me VERY nervous that the same exact ACCDB in A2007 runs differently on different OSs (XP vs Win7).
This basically gives a count of for a specific month. There are twelve rows of text boxes and two columns. There is a query applied to the report to input the year, as this is a yearly report.
What I want to do is link a chart to each and every text box to show the data in an easy to view format. But I can't seem to figure it out, and I've had no luck on the web .
SELECT qryHoursReq.VolunteerId, qryHoursReq.Name, qryHoursReq.Program, Sum(qryHoursReq.Total_Time) AS SumOfTotal_Time, qryHoursReq.S_date FROM qryHoursReq GROUP BY qryHoursReq.VolunteerId, qryHoursReq.Name, qryHoursReq.Program, qryHoursReq.S_date HAVING (((qryHoursReq.S_date) Between [startdate] And [enddate]));
This is my query
I'm trying to get a count of distinct volunteerID in an unbound textbox on report.
If I use =Count(*) I get 2 when I put in date parameters and it groups by program
This is kind of correct, but, these 2 are the same person, she had different days she participated.
What code can I use for only get a count of 1
FOrgot to mention, when I use the DCount with numerous examples, I get #Error
Working on a report that displays multiple pie charts. Each chart is based on a different query. I cannot pull a single query for all charts due to the criteria for each conflicting with each other. Each query is filtered by Fiscal Year based on what I input into my Fiscal Year Filter form. The command button on the FY Filter Form opens the report, set TempVar to the FY field (the criteria for each query), and closed the FY Filter Form. This works as I want it to.
The problem: I have additional fields I want to show up on the form such as number of completed students (WINGED). This number is based on yet another query where all completed students are counted [WingedCount]. I have tried to write an expression to an unbound field that points at this [WingedCount] field but it does not work. Then, I changed the report's source as the query with the [WingedCount] field. This does work, however this is where I run into an issue
I open my FY Filter Form and type in my criteria and select the open command button. However, now I am asked for the criteria again for each chart on the report.
I need a way to input the criteria only once and have all charts populate as well as my count field.
I have attached a jpeg of my current report and will upload jpegs of the needed output following this post.
I am trying to get a report based on a selection from a combo box. The issue is many fold. Firstly I have been playing around with it so much that I have messed up the syntax and can't remember what I had. Here is what I have at the moment (this is based on a button):
The second issue is that it isn't filtering on the combobox - it gives all the data from the database based on all the entries in the combobox but this is probably down to the syntax again.
I managed to create a report by user using a combo box. When an user selects a name from the combo box, it generates a report showing all the records by that name.
However, now I need to be able to generate a report as above but between 2 dates. How??
I am having two sets of criteria. 1) by user 2) between 2 dates
My Access 2003 Database contains the following objects:
1. tblTrackerData - this contains over 1,000 student enrollment records. One of the fields "QualCourseName" (text) contains the name of the Training Course that the student has enrolled in.
2. qryCourseNamesGrouped is a query based upon the above table with one field only - QualCourseName. This includes the names of the training courses and has been grouped so that only 17 training courses appear, not over 1,000.
3. frmParameter is a form that includes a combo box cboFiltered based on the above query AND a command button CmdFiltered to open a report rptCourseNamesGrouped and filter the report based on the selection made from the combo box.
I have added the following code to the OnClick event attached to the cmd button" ================================================== ======
Private Sub cboFiltered_Click() On Error GoTo Err_cboFiltered_Click Dim stDocName As String
[Code].....
When I click on the cmd button, the entire report is opened, instead of the selection that I made in the dropdown list.
I am using Access 2010 (self taught and continuing to learn each time I get asked for a new report). I have created a query based on the data being selected from two combo boxes on a form, ie start date and end date. The report works as it should but I want to be able to automatically use the dates in the report heading. For instance, Summary Report from xxxxx to xxxxx, where xxxxx is the start and end dates that the user entered into the two combo boxes.
The date field on my query reads Between [forms]![F - CboReportDates]![Start Date] And [forms]![F - CboReportDates]![EndDate]
This works great to return a report if the user selects something from the combo box. How do I adapt this so that the user can also leave the combo box blank and filter the report to return all records?Additionally, what if I want to have the user filter between dates selected on the form; i.e. between 'txtStart' and 'txtEnd'
I'm new to Access so sorry if this is stupid - I have looked everywhere!
I have an unbound combo box on a form that is populated in the onload event of the form by setting the rowsource to a query based on the companyID on the form. The query gets me a list of contacts at that company.
So, after the form is loaded the combo box (if dropped down) might show:
1 Fred Smith 7 Jim Jones 9 Arthur Askey
The first column contains the ContactID.
My question is .... when the form loads I know the ContactID of the person I am looking at. If that person is 'Jim Jones' and I have a field on the form which contains Jim Jones ContactID of 7 - how can I get the combo box to be showing the 'Jim Jones' row?
(I don't what to bind the combo box to anything as I want to use it just to filter which contact I am looking at - not change the ContactID)
I guess I want to loop through the combo box saying 'If the contactID of this row = the ContactID on the form - select this row' - but I can't find the syntax anywhere.
i really need some help with this... heres the background. I have an unbound search combo box in the header of my form. when users select the PCNo from this combo box, i need the associated container no to appear in a control on a bound form.. below are my tables:
tblShipping ShipID (PK) PCNo
tblContainer ContainerID(PK) ShipID (FK) ContainerNo - (data to be displayed on form)
how can i pull up and display the container no (stored in tblContainer) based on the PC No that a user selects from this combo box?
i have got the combobox working fine - the users can select a PC No that is already stored. what i need now is for the Container No to be displayed on this form, based on the PC No.
I've gotten rid of all the linked tables from my frontend, so I'm fetching all my data from the backend with VBA code.
This works splendidly until I got to creating reports!
I can populate the report detail with the below code, by opening a recordset and filling in the appropriate text boxes when the report calls the Format_Detail subroutine, but the problem is, that opening a report with no recordsource sets the FormatCount property to 0, so it only runs through the format_detail once. Setting the .nextrecord to FALSE allows as many sub calls as I need, but I can't figure out how to force the report to generate a new detail line! It's looping through all the records in the recordset, but it's only generating one line on the report
Any ideas?
Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer) On Error Resume Next
If tags.EOF = True Then
[txtfound] = tags.RecordCount tags.Close Set tags = Nothing Me.nextrecord = True Exit Sub
Set tags = backend.OpenRecordset("SELECT Tags.TagCode, Codes.Description, Count(Tags.TagCode) AS CountOfTagCode FROM Codes INNER JOIN Tags ON Codes.Code = Tags.TagCode GROUP BY Tags.TagCode, Codes.Description")
I am designing a customer information form, the form has an unbound combo box showing customer names and when clicked opens the customer record.
My problem is when I enter a new record, I have a button that saves current and opens new, but when I am in the new record, the customer I just added previously is not showing up on the unbound control, only when I close the form completely and re-open it.
Is there a code to update the unbound combo box when you click to go to new record.
I have a report that starts with an unbound form [Form1] which I need for the parameter inputs. Date1, Date2 and BillingMonth, all three are unbound controls. Date1 and Date2 are the criteria for the dates of billing and they work fine, that is, the query looks them up and the query runs fine. But I want to use the unbound control of BillingMonth to populate an unbound control in the report heading.
The control source is set as =[Forms]![Form1].[BillingMonth]; it works fine if the underlying [Form1] is still open. There is a command button on [Form1] that opens the report and then closes [Form1] since it is a pop-up form that is only used to get the criteria for the underling query; I don't want it to remain open when I run the report. However, the [BillingMonth] does not appear on the report heading. Just #Name?, which I assume means that since [Form1] is no longer open, it can't find the control [BillingMonth].
So, how can I get the [BillingMonth] to appear on the report heading?
I have an unbound text box in the detail section of a report that can be anywhere from a couple of lines to more than 90, depending on what items have been selected elsewhere. I've gotten the size of the textbox and detail section to vary using .height and allowing for 270 per line. All this works fine and everything prints. However...
The problem is that with the reports where this textbox won't fit on the first page, the detail section doesn't begin printing anything until the second page. It will then break across pages 2 and 3 just fine, but I would like it to start printing on page 1 whether it will fit or not. Research shows it has something to do with the "on retreat" event, but I can't find enough to figure out what to do.
Ive got a combo box linked to fields in a form so when I value (tenantID) i selected in the combo box the record appears in the form.
The problem is, I have changed the form name Unbound (it was blank) to TenantID as I want it to appear when the form is opened, however now I cannot select other items from the combo box.
Ive got a database with a combo box, called "combo1" (with 2 columns). It is unbound but uses a query as its row source. When i select a value in combo1 is places the data from combo1.column(1) into a textbox (text1). I then click the next record button (button1) and it then keeps the same value in combo1 because it is unbound. So i need it that when i go to the next record it displays the value in combo1 that relates to text1.
For a text box in a Report, I am trying to use the "SumOf([UnboundTextBox])" as the Control Source in the Report Footer to add the unbound text box in the Details section. I know it works with a bound text box, but does it not work with an unbound text box?
I have a report, in which i have a unbound text box i want to control the size of the text box as actual characters means,
if the word is in box is elephant so in report it show complete word then next and if the word is small like cat then it resize then the other word next to cat comes automatically at normal space by auto resizing of text box ..
