Reports :: Using Same DateRange Form For Many Reports
Mar 10, 2014
I have a number of reports set up this way.
Report - Record Source = qryClosedCases based on two parameters [Enter BegDate] and [Enter EndDate]
I ran into a snag when I wanted to add DCounts to the report footer as a snapshot of activity. DCounts dont work with parameter variables because they arent saved. So I created frmDateRange with two unbound fields to prompt the end user to enter the BegDate and EndDate. I have the following code on On_Click: OK button on frmDateRange
Docmd.openreport rptClosedCases , , acViewPreview
Report - Record Source = qryClosedCases
With Query now based on FieldName: Close_Date = between [forms]![frmDateRange]![BegDate] and [forms]![frmDateRange]![EndDate]
Works great; however, I have about seven other reports (with corresponding queries as record source) set up the same way and I dont want a separate frmDateRange form for each report/query. I have a Master Reporting Menu form for users to select which report to print. IF I use the same frmDateRange, how do I dynamically select the approproiate report based on the button the user clicked. OR do I need to revamp my Master Reporting Menu to BEGIN with the frmDateRange and then have the using select the desired Report button?
View Replies
ADVERTISEMENT
Oct 2, 2013
I have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.
1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)
2. If user presses the Print button before pressing Save button then system should prompt user.
Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):
Private bSaveClicked As Boolean
Private Sub Form_BeforeUpdate(Cancel As Integer)
If Not bSaveClicked Then
MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation
Cancel = True
[code]...
View 5 Replies
View Related
Aug 19, 2014
I have a continuous form that displays a list of invoices (frmInvoiceList) based on an adjustable filter contained within the form. I have the filters working the way that I want them through VBa and I have a button on each record to open a report (rptInvoice). Inside that report, I have some controls to "print", "email", and "export to PDF". Again all that works just the way I want. The Form and the Report are based on a different query and each has an InvoiceID field to link.
What I am trying to do is put the Print, Email, and Export buttons on the main form which would perform the appropriate action for all the records that are displayed on the form. I've been able to get the Print function to work to a degree. It will print all the records, but it changes the background colors based on the alternating records. When I go to Email or Export, it creates a single file with multiple pages and each page is a new record, again with the alternating background colors.
Ideally, I would like to have a separate file exported for each record that can be renamed and archived separately. I'm not so concerned with the email function but if it would be possible to generate a separate report for each invoice, then pull the appropriate email address for the record, that would be really nice.
I've tried some "for" and "do" loops that I found through some Googling but none of the samples ended up working like I wanted.
View 10 Replies
View Related
Jul 17, 2015
I am using a form with command buttons on it to set the criteria in my query to run the report.
Example : cmdQ1 'Command Button
PHP Code:
'1st Quarterly Report.
BeginDate = DateSerial(Year(Date), Int((Month(Date) - 1) / 3) * 3 + 1, 1)
EndDate = DateSerial(Year(Date), Int((Month(Date) - 1) / 3) * 3 + 4, 0)
I managed to get this far but need to continue on with 2,3, and 4th quarters.
View 8 Replies
View Related
Jun 15, 2015
I am editing a database that provides the option of creating custom reports, where the user can input a date range of their choice and receive aggregate data for that time frame. Although all of the numbers in the report are correct, I am having trouble with a chart that I inserted into the report.
Specifically, if the date range requested spans 2 calendar years (i.e. April 2014 through January 2015), the data for January 2015 appears at the beginning of the year (so the chart x-axis is for Jan through Dec, and the Jan 2015 data is showing up in Jan (as if it was 2014, not the end of the given range in 2015). When I try with smaller time frames within a calendar year, it adjusts just fine (i.e. shrinking the window so just March-May is displayed on the graph).
How to adjust the axis so that it properly records the data range- so that it would start the axis with April and end in January, for example?
View 2 Replies
View Related
Feb 18, 2014
In my tables i have used calculated fields. one of the fields is to "total expenses." In a report, i need to show the sum of all the "total expenses", the filed populates in the report but the cents are missing. for example if the amount is 6080.40 it shows as 6080. how can i get around this? I have tried changing the decimal point value to 2 at which point the value turns to 6080.00 when it should be 6080.40 (i am a beginner at this i am assuming the answer will probably involve c++ or visual basic's, two concepts i am not familiar with.)
View 2 Replies
View Related
Jul 11, 2013
I am still trying to get a hang of development in access 2010.
I would like to design a form with a listbox or a combobox which holds all 8 of my reports (a table has all the reports), with a Print and a Preview view buttons. In addition, the user must be able to select if they want to view the report by month, quarter and the year in question.
How do i have a specific report print or previewed based on the value selected in the listbox or combobox and the date criteria.
View 4 Replies
View Related
Nov 23, 2013
I have a form that the user can add Work Order numbers to a text box and pass them to a listbox to collect 1 or more values. Each of which need a separate report with the labour hours for each Work Order.
I am having issues figuring out how to get it to pass them to a query or filter the reports.
I have tried many different examples and nothing seems to work.
View 4 Replies
View Related
Jul 19, 2013
I print a report onto labels (Avery 5960: 3 columns of 10 labels on a letter sized piece of paper). The report and labels print fine BUT...
I need physical page breaks between certain sections. When I click on "keep whole group together on one page" in the "group by" section of the report, it starts a new COLUMN of labels (which Access sees as a new page), but does not force an actual new piece of paper.
How can I force a real page break?
View 2 Replies
View Related
Sep 2, 2013
I have been tasked with creating a database to log employee suggestions and then automatically present reports around the site. I have developed the database and it works OK and can output *.PDF reports, but I'm having problems with how to display these reports. My idea was to output the reports automatically as *.TIFF or *.JPG files and have them stored in a folder that the My Pictures screensaver uses. The reports (in fact, any site report stored in this folder) can then be shown on any screen dotted around the site when it goes into screensaver mode. However I can't find any way to output/convert to a picture file.
The other option is to create a webpage that rotates through the saved PDFs, but this isn't ideal as the PC users will have to load the webpage to display the reports.
View 4 Replies
View Related
Apr 1, 2015
I have date picker which works correctly in form. When I put that form as subform to reports header calendar shows up but after selecting date on calendar textbox stays blank. Format of textbox is Short Date, Show date picker property is For dates.
View 1 Replies
View Related
Apr 21, 2014
I have a database of high-school football players, and I am looking to print out single page reports (or forms) that will show detail from several tables and queries. This will act as their resume when they visit schools on recruiting visits. The reason for needing query items, is that I have developed queries that return the most up to date height, weight, 40 time etc., and that single most up to date number is what should print, not the entire table. When I try to build a report it will let me bring in multiple tables, but not queries.
View 2 Replies
View Related
Dec 28, 2014
I am trying to create a P&L statement in access. I know what I want to come out at the end. I am just starting to play with access and having trouble getting what I want to come out of it.
On the sales side I have a query that gathers all the revenue sources and calculates a total for each date. I then use a second query to just take out the data I want for the P&L report. I created a sub-report that displays the data I want. I use the grouping and grand total features to get the total into the report footer. So far so good.
On the expense side I created a form of a query to manage the one to many relationship to capture the data for expenses (one purchase with many line items). I created a query based of this query to get the relevant data for my expense sub-report. I created the sub-report and got everything looking and calculating the way I want it to. I use the same grouping and grand total features to display the data in the report footer. Still good.
I created a new main parent report with the two sub-reports (sales & expenses) on it and even was able to pull the totals from the sub-reports into the main (so currently the subtotals of the two sub-reports are displayed twice). Now when I try to use the textboxes I used to pull the sub-report totals into the main report to perform additional calculations (sales - expenses) I get #error. I have tried different things and gotten ?name.
Control source for the two textbox controls on the main that display correctly, but don't let me do any further calculations.
=[rptP&LExpensesOverview]![AccessTotalsAmount]
=[rptP&LSalesOverview]![AccessTotalsTotal Sales]
To do the subtraction I have tried using the references above, as well as just using the names of the unbound text boxes in the report that bring the totals into the main report.
As a work around, I tried to build one query with all the data from sales and expenses, but can't "filter" based on date and get the data I want in the query results because the two sets of data are not necessarily related. I either get a long list of records, or no records (I am currently only playing with about 5 days of data).
View 2 Replies
View Related
Nov 4, 2013
I am trying to pass a date range parameter & an additional parameter (Type of Audit) to 6 subreports based off individual crosstab queries and housed on one Unbound Report ("rptFinal").I have an Unbound Form "frmDate" passing a date range and Type of Audit using [Start Date] and [End Date] to rptFinal with a button that simply opens the rptFinal as follows:
stDocName = "rptFinal"
DoCmd.OpenReport stDocName, acViewReport
In each Crosstab query, I have set the parameter criteria (in both the Parameter section & the query itself) to:
[Forms]![FrmDate]![Start Date] And [Forms]![FrmDate]![End Date]
and also,
[Forms]![FrmDate]![Enter Type of Audit]
On each subreports On Load Event, I have added:
Private Sub Report_Load()
Me.Filter = "[DteAuditDate] BETWEEN #" & Forms!frmDate![Start Date] & "# AND #" & Forms!frmDate![End Date] & "#"
Me.Filter = "[Type of Audit] = #" & Forms!frmDate![Enter Type of Audit] & "#"
End Sub
and I've set the Filter On Load property to: Yes..I can open frmDate, fill in the date and Type of Audit, launch the report and it runs with no error, I have 6 blank subreports in report Preview. The headers are showing up but none of the data.
View 2 Replies
View Related
Apr 26, 2015
I have created a report which contains within it multiple sub-reports, which I use to generate a document for management meetings on a bi-weekly basis.
For each of these I have the subreports filtered to a unique number for consideration that period e.g. LIKE "88/00039" which relates to my data.
In order to change this I have to manually update each of the filter commands within the subreports but I assume there must be an easier 'catch-all' method of achieving this?
Ideally I'd be looking for a command prompt so I could enter just the number sequence e.g. "88/00040" and then enter this (via a corresponding macro or similar) to update the filter commands.
View 2 Replies
View Related
Mar 30, 2014
I have four forms named [Information Form], [Evidence Form], [Subject Form], and [Vehicle Form]. The Final Form is a Tabbed Form named [New Incident]. The tabbed form has four tabs, with each tab displaying one of the forms above. I also have a Print Command Button named [Print All] underneath the tabbed portion of the [New Incident] form.
Also, All of the four forms are set to data entry - yes, so that on open they will be clean and read for new record entry. I need the [Print All] button to do, just that, print everything that has or has not just been entered into the four forms, even if some are printed blank because they were not necessary for this particular report. One thin of note is that each form on the tab has a field for the "Incident Number" which will be the same for all four forms.
View 12 Replies
View Related
Nov 18, 2013
I am trying to add to a db I inherited. One of the end reports that is produced is a cost breakdown for each end user.As things stand, the data collates into individual reports which are then grouped into one file and saved via PDF. What I am trying to work out is whether or not I can selectively pick some of those reports to have more than one copy.
I see a form (within an existing form) that will list all of the end users for a particular scheme and, next to that, be a dropdown that will allow the db user to select how many copies of each report needs to be published. These will then collate merrily into one document to be saved to PDF.
View 8 Replies
View Related
May 2, 2014
I have a queries that do all the calculations and dumps the output to Query X for all different types of customers. At the moment I am required to generate a report for each of the customers and send it to them, manually.
End Goal:Initiate a Macro (at a given time at a given frequency) that would run a process to generate different reports for all different types of customers using a standard report template. I am also trying to avoid having to create a report for each customer (as the customer base grows, the report count will grow) so looking at something that would look into Query X and generate # of reports depending on number of customers.
View 6 Replies
View Related
Nov 16, 2013
I'm working on a project where I must send roughly a thousand individual reports to a thousand different email recipients with .pdf attachment.I know I'll need to add a table that designates the email address by SHIP_TO_CODE. Then create a form with the email subject, body, etc.. I don't neccessarily have to have the reports saved to a folder; I really just need them emailed to each account.
I was thinking I could modify the code some to accomplish my goal, but I'm not sure what to put. Maybe add a SendObject in there somewhere.CODE that I have now that saves the report to a folder. (I want to modify some to send email attachement instead)
''Module CODE:
Private Sub Form_Current()
Dim rst As DAO.Recordset
Set rst = CurrentDb.OpenRecordset("SELECT DISTINCT [SHIP_TO_CODE] FROM [qryWty&PendingData];", dbOpenSnapshot)
Do While Not rst.EOF
strRptFilter = "[SHIP_TO_CODE] = " & Chr(34) & rst![SHIP_TO_CODE] & Chr(34)
DoCmd.OutputTo acOutputReport, "rptDraft", acFormatPDF, "C:UsersmrutherfordDesktopASC Daily Reports" & "" & rst![SHIP_TO_CODE] & ".pdf"
[code]....
View 14 Replies
View Related
Jun 16, 2014
I am trying to produce statistics reports in my database. The user selects the information they require in a form (date from, date to etc). A query then produces the results listing each job in turn which is what I want however at the end I would like to produce sub-totals for each client.
Depending on the criteria selected by the user, only some clients will appear in the list. Ideally I would like the footer to show something like:
Client 1 - 4 jobs
Client 2 - 1 job
Client 5 - 6 jobs
Client 6 - 17 jobs
I have tried using the field:
Code:
=Count([ClientDetailsName])
However this only gives the total number of jobs.
View 6 Replies
View Related
Jul 9, 2013
i have an excel data for assets and i have imported it into access 2010 but i want to be able to do the ffg;
1. want to be able to generate reports like how many computers does a particular branch have.
2. i want to be able to sum the no of each field heading per branch
View 1 Replies
View Related
Apr 24, 2013
Just encountered a new issue in my Access database whereby reports and forms often appear transparent and graphically glitch all over the place. Hard to describe but the following screenshot will demonstrate:
[URL]
If I zoom into a report then it renders properly and will print OK. If I refresh a form then that seems to fix it temporarily.
This has only started happening since we upgraded our server last week.
Background.
Access front end.
MySQL back end.
Users have a copy of the front end on all of their PCs. This issue is affecting everyone.
The database backend isn't stored on the server we recently replaced.
View 1 Replies
View Related
Apr 11, 2013
I have a report that has Bill to and Ship to addresses. They are positioned across from one another (ship to on the right and bill to on the left of the page). The issue is that the 'can shrink' doesn't work when there is data in the same field on the other address..
View 1 Replies
View Related
Apr 22, 2015
I have a dropdown list of reports that is supplied by table. I also have listbox that are populate by another table. I want to be able to run the reports from the dropdown and from the listbox ....whatever the selection is to pull that info from the report and display.
View 3 Replies
View Related
Nov 14, 2013
I'm working on a project where I must save roughly 1000 individual access reports based on the group to a specific folder in pdf format.
Problem:The code I found on this site works, but not exactly the way I need it to. Using the current code (pasted below) all of the pages of the report are being saved to pdf for each group, instead of just the single page. For example, all 1000 pages of the report are being saved to each pdf file, when I only want the 1 page for each of the groups.
I believe that the problem lies in the filter for the Open Event code, but I don't know how to modifiy it to make it work the way I need.
CODE:
Option Compare Database
Public strRptFilter As String
Private Sub Report_Click()
Dim rst As DAO.Recordset
Set rst = CurrentDb.OpenRecordset("SELECT DISTINCT [SHIP_TO_CODE] FROM [qryWty&PendingData] ORDER BY
[code]....
View 13 Replies
View Related
Dec 11, 2013
I have a Report containing a sub-report which holds the pictures. Typically there are 3-4 pictures per A4 page and 2-3 pages, so not millions, but for some reason whenever I load I get between 1-3 pictures a page and the rest show as blank. I can repeatedly reload time after time and get a seemingly random number of successful images.
The original images are on a network drive (but connectivity is good). They are high quality images but the load time isn't that bad (Is there a 'normal' load time for these things?) I wonder if it's just timing out after the first X pictures..
View 5 Replies
View Related
