Reports :: Viewing Different Records Under Different Columns Of Dates But On Same Page?
Apr 5, 2014
I deal with different blood test reports for same patient on different dates. Because tests are so many, so i have arranged them on different pages of the same main report. But the problem is, that access shows different records of the same tests for different dates one under the other as a set...while i want it to show in parallel columns with test label on left side and column heads as different dates.
View Replies
ADVERTISEMENT
Mar 11, 2014
I am trying to create a report that has the dates go accross the page and not down the page .
Example:
Need:
Jan 2014 Feb 2014 March 2014
Ans so on. I will also need datat under each date.
I am having issues with the reports to give me the output that I need.
View 1 Replies
View Related
Jun 13, 2015
If I have a report and it has controls (labels representing column titles) in the page header. Now when I print the report - if it happens that the last page has no detail records - but there is text boxes and so forth in the report footer. Is there a way to not display the page header on the last page?
I have a report where the last page shows the page header - and the field/column labels on the page header - but for which there is no detail records left to display - on the last page. There is report footer information that should display. It just looks weird because the field/column labels show at the top of the page - but there is no data remaining to print under them on that last page.
View 1 Replies
View Related
Aug 24, 2013
I have a report, a phone list, which has two columns, see the attached file for a screen shot.
The Employee Name, Mobile Phone and Desk Phone text is in the "Page Header". The Data fields that retrieve from the table are in the "Detail" section. The whole report is 8.89cm wide. The two columns fit perfectly across a portrait A4 sheet.
When I run the report to Print Preview, I get the two columns fine, but the Employee Name, Mobile Phone and Desk Phone text doesn't repeat at the top of the second column. Is there some way of achieving this? I want the part I have circled in RED to appear over the top of the second column as well.
I would have thought there would be a simple check box somehwere that would be something like : "Repeat Page Header on multiple columns", or something as equally useful. Strange that this is so difficult to do, as am sure that this sort of thing is something that lots of people would want to do?
View 9 Replies
View Related
Dec 4, 2006
Viewing a report from an Access Webpage... I can not, unlike from a form, create a button to view a report. Is there anyway around this? Is there no functionality to display the report as an html page or so?
Sam W.
View 1 Replies
View Related
Sep 24, 2004
I have seen large projects in which there are clearly several printed database reports printed out to make one booklet.
1. How does one get page numbers for multiple reports to go in sequence instead of starting over again at 1 for each report.
2. How can you add a page reference in one report to something in another report?
Do you have to do these things by hand or is there a way to create a something with auto numbering capabilities? Do you do it by importing the reports to MS Word and creating a master document?
View 2 Replies
View Related
Oct 18, 2004
I am very new to access and have a question which I think is very easy to answer. What I have is an access file with a listing of companies, their contacts and what services we provide for them. (each company/client/service is listed in a row with each new set of information on the row below it).
What I am looking to do it to create a data access page that anyone in our office can view. I want the access page to have a text box where they can type in the name of the company, then click a 'search' button. That will then display the results in a box below everything. The results would be the contact and the services (there are other columns in the datasource as well, but I didn't list them).
If anyone can shed some light onto my problem it would be most appreciated!
Thanks
View 3 Replies
View Related
Nov 5, 2007
if let say i create a page that have database (*.mdb file) and for my client side, the PC don't have Microsoft Access, can they view the page that have *mdb file?
View 3 Replies
View Related
Nov 6, 2014
I have a report having data from query i have taken only 4 fields from query in detail section of report in design view.
What i want is that the report to print for single record single page means currently it is printing one more record on one page which i don't want and i want the report to show or print like all four fields for one record on one page how to do this...
View 1 Replies
View Related
Nov 13, 2013
I have a report in which there is a subreport that prints towards the bottom of the page. I know that I can use grouping to have the subreport print on the next page if the entire subreport cannot print on the current page. However, I want to have the break occur not for the section as a whole but between records. Let me illustrate this.
All sorts of other stuff prints at the top. At the bottom, I have a subreport which today prints the following on the first page and breaks the last record in two printing the second line on the next page.
First Page of the Report:
__________________________________________________ _______________
Doctor's Full Name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Doctor's Location: XXXXXXXXXXXX
Doctor's Full Name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Doctor's Location: XXXXXXXXXXXX
Doctor's Full Name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
__________________________________________________ _______________
Second Page of the Report:
__________________________________________________ _______________
Doctor's Location: XXXXXXXXXXXX
__________________________________________________ _______________
What I would like to do is the following:
First Page of the Report:
__________________________________________________ _______________
Doctor's Full Name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Doctor's Location: XXXXXXXXXXXX
Doctor's Full Name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Doctor's Location: XXXXXXXXXXXX
__________________________________________________ _______________
Second Page of the Report:
__________________________________________________ _______________
Doctor's Full Name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Doctor's Location: XXXXXXXXXXXX
__________________________________________________ _______________
Is it possible to specify that if a complete record within a subreport cannot be printed on the same page to break to the next page without having the whole subreport break to the next page?
View 4 Replies
View Related
Feb 18, 2015
I have been working on this for over a week in Access 2010 and I know that I am almost there, but need getting over this last hurdle as I have a severe case of tunnel vision on this while I am trying to get it to work.
I have a Main Report based on my Element table and a subreport based on my OTC table. There is a one-to-many relationship between the Element and the OTC table.My Master / Child Fields between the two reports are as follows: ElementID;GroupNum
My SQL for the Main report is:
Code:
SELECT Val(DCount("*","Element","ElementID=" & [ElementID] & " AND Step <" & [Step]))2 AS GroupNum, Element.ElementID, Element.ProcessID, Element.ModelID, Element.Step, Element.ElementDescription, Element.RevDate, Element.GPCFS, Element.TrainingGate
FROM Element
[code]...
As an example in testing this report, I am looking at a specific Element with 33 records and a total of 72 OTC records. Each of the 33 records can have 1 or 2 or 3 or up to 4 OTC records but the report is only 17 pages which tells me that the page break is occuring based on the ElementID and not on the OTC records....
View 1 Replies
View Related
Nov 9, 2013
How to display in a report a field with 50 records in two separate columns of 25 records.Is this possible or am I completely off the reservation?
View 2 Replies
View Related
Nov 12, 2013
I have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.
View 3 Replies
View Related
Apr 20, 2014
I have a report that should only show 1 page yet I have 2 and one is blank . I cannot find out why?
View 3 Replies
View Related
May 17, 2013
I've used the following code on the footer on print procedure:
Private Sub PageFooterSection_Print(Cancel As Integer, PrintCount As Integer)
Me.PageFooterSection.Visible = (Me.[Page] = 1)
End Sub
This works fine when you view it in print preview, but the footer don't show up at all when you actually print it.The reports default view itself is set print preview.
View 3 Replies
View Related
May 23, 2013
I have made a report on my query. The page setup is all around merging 0.2" and page size A4
When i view this report in preview it looks all my data whatever i want in a page but after every page it will generate a blank page.
I have included my report.
View 2 Replies
View Related
Sep 17, 2004
I have a report that will not preview as full screen unless I hit the button in the right corner. Is there a way to default it to large every time?
Along the same line, I have a form that opens with the menu just fine but when I return to it after running the report, it comes back full screen instead of the size it should.
I am sure these are easier ones for some of you but I can't seem to solve it.
Lucy
View 3 Replies
View Related
Nov 29, 2004
I am trying to view a Crystal Report within a Microsoft Access Project. I am recieving the following error " object does not support this property or method". I have registered the crystl32.ocx and the crviewer.dll. Any suggestions would be helpful.
Thanks
Jacqueline
View 3 Replies
View Related
Oct 20, 2004
I have created a report in Access 2002, that I use to export to
Excel. My problem is the field names in the report are quite long
and some are very similar to each other. I can not find a way to
view a list of the field names for the report while in Desing view.
I have no real formatting on the report as I only use it for exporting, and
looking at the report itself in Access, all the field names are truncated
Any help on how to view which fields are in the report and how could
I easily add another field in the middle of it if needed.
Scott
View 1 Replies
View Related
Jul 20, 2015
I am building a database in Access 2007 that needs currently includes images and excel files as embedded OLEs. I am aware this is not ideal, but I can't change my employer's mind.
I've been looking in to the Attachment data type but am having trouble deciding if it will work as a substitute for my purposes. I know a variety of image file types can be displayed inside Access on forms and reports, but I can't find anything about displaying the contents of an excel sheet. I read something about using Active X controls to display .pdf images - is there anything similar for Excel?
View 7 Replies
View Related
Dec 24, 2014
I'm using Access 2003. I have a report that I've set up with 2 columns. Unfortunately the Page Header won't print the headings for both columns. I looked on the Help screen and it says the information below. I assume this does not apply to the Page Header section? When I try to use a group header, all I can get is a header for every single row in the group. What am I doing wrong?
Repeat a group header in another column
Open the report in Design view (Design view: A view that shows the design of these database objects: tables, queries, forms, reports, and macros. In Design view, you can create new database objects and modify the design of existing objects.).Double-click the section selector (section selector: The box on the left side of a section bar when an object is open in Design view. Use the box to perform section-level operations, such as selecting the section.) of the group header (group header: Used to place information, such as group name or group total, at the beginning of a group of records.) to display the property sheet.Set the RepeatSection property to Yes.
View 6 Replies
View Related
Apr 18, 2006
Hi, can anyone please help me.
I've just set up a form with 2 pages which I can add data into, but for some reason, I can't view all records.
I've tried using the switchboard to add buttons to both add records and view (but they both only add), and i've also set up my own button with the instruction to view all records, but it just won't work.
On the first page the data source is tbl_CompanyInfo, and on the second page, the data source is a subform with the data source tbl_Contacts. The subform will link contacts to the company info via the CompanyID field. I hope that makes sense.
Can anyone please tell me how I can view all of the data via the form.
Thanks very much
View 5 Replies
View Related
Oct 23, 2014
I am trying to create an invoice report. I want to add all the costs from the detail section in my footer. I have accomplished this in either the Report footer and/or the page footer, but the problem is that the report footer doesn't go to the bottom of the page, and the page footer doesn't go to just the last page. I have tested a bunch of suggestions that don't seem to work.
1. Print page footer with Report header = NO - only works if your report is two pages or more.
2. Private Sub PageFooterSection_Format(Cancel As Integer, FormatCount As Integer)
If Page = Pages Then
Me.[TextBoxName].Visible = True
Else
Me.[TextBoxName].Visible = False
End If
End Sub
The Page functions worked, but it did not change the results from page to page. If it was a two page report, then the if statement is false and the text box was not visible on page 1, but it also was not visible on page 2.
View 1 Replies
View Related
Jan 18, 2006
Before I spend an age trying to get this to work I thought I'd consult some experts.
I have a main data table for recording all possible insurance claims against a company. What I want to do is create say 2 incidents but link them in some way. i.e. One of our drivers had a car accident (1 claim against our motor policy), but then the driver of the other car sues us(1 claim against our public liability).
I can create 2 seperate records and maybe have a field to highlight parent/child reference numbers, but is there anyway I could allow the user to click a button and see the related records simultaneously?
Cheers
View 2 Replies
View Related
Jul 19, 2013
I print a report onto labels (Avery 5960: 3 columns of 10 labels on a letter sized piece of paper). The report and labels print fine BUT...
I need physical page breaks between certain sections. When I click on "keep whole group together on one page" in the "group by" section of the report, it starts a new COLUMN of labels (which Access sees as a new page), but does not force an actual new piece of paper.
How can I force a real page break?
View 2 Replies
View Related
Apr 21, 2014
I have a database of high-school football players, and I am looking to print out single page reports (or forms) that will show detail from several tables and queries. This will act as their resume when they visit schools on recruiting visits. The reason for needing query items, is that I have developed queries that return the most up to date height, weight, 40 time etc., and that single most up to date number is what should print, not the entire table. When I try to build a report it will let me bring in multiple tables, but not queries.
View 2 Replies
View Related
