Reports :: Zero Values And Calculated Fields In Reports?
Nov 13, 2013
I am trying to get calculated fields in my report to work but zero values in the data are throwing up #Div/0! and #Error! and #Num!
The main data fields I am trying to work with are:
VehicleReading
PreviousReading
VehicleLitres
My aim is to track mileage and consumption for a fleet of vehicles and show daily and weekly averages in mileage and consumption and then to flag 20% increase in consumption.
I have a calculated field in my report named Kilometers,
= [VehicleReading]-[PreviousReading]
and also a calculated field named Consumption,
=[Kilometers]/[VehicleLitres]
My sum and average calculation fields in the group footers are only working where there are values above zero in the Kilometer and VehicleLitres and Consumption fields.
In reality there are some days where there has been no travel, so some records will have a zero for the Kilometers field and there are also days when there has been no refueling so there is a zero for the VehicleLitres field.
I have tried using the expression builder to create an IIf function but to no avail.
I have tried copying the syntax suggested by the Expression builder:
«Expr» IIf («expr». «truepart». «falsepart»)
I know I need to get those zero's to fail in the calculation but as I said before all of the suggested expressions I have tried fail due to syntax!
I am trying to get calculated fields in my report to work but zero values in the data are throwing up #Div/0! and #Error! and #Num!
The main data fields I am trying to work with are: VehicleReading PreviousReading VehicleLitres
My aim is to track mileage and consumption for a fleet of vehicles and show daily and weekly averages in mileage and consumption and then to flag 20% increase in consumption.
I have a calculated field in my report named Kilometers, = [VehicleReading]-[PreviousReading]
And also a calculated field named Consumption, =[Kilometers]/[VehicleLitres]
My sum and average calculation fields in the group footers are only working where there are values above zero in the Kilometer and VehicleLitres and Consumption fields.
In reality there are some days where there has been no travel, so some records will have a zero for the Kilometers field and there are also days when there has been no refueling so there is a zero for the VehicleLitres field.
I have tried using the expression builder to create an IIf function but to no avail. I have tried copying the syntax suggested by the Expression builder:
«Expr» IIf («expr». «truepart». «falsepart»)
However I keep getting error messages and despite troubleshooting and looking on the internet I can't seem to find a solution to this.
In my tables i have used calculated fields. one of the fields is to "total expenses." In a report, i need to show the sum of all the "total expenses", the filed populates in the report but the cents are missing. for example if the amount is 6080.40 it shows as 6080. how can i get around this? I have tried changing the decimal point value to 2 at which point the value turns to 6080.00 when it should be 6080.40 (i am a beginner at this i am assuming the answer will probably involve c++ or visual basic's, two concepts i am not familiar with.)
I have a textbox in a report that I would like to calculate the sum of values that are less than 600.Then have a second textbox that counts the number of records that have values less than 600..This is based off of a query with calculated fields..I have been working with a formula that looks something like this
=Sum(IIf([BaleETime]="<600",0))
But all I get is a value of 0.BaleETime is the elapsed time between bales.
So I have a report with the following text box controls:
[Surname] & ", " & [Firstname] =Sum([Quarter1_A]) - Named "Quarter_Total" =Sum([Quarter1_T]) - Named "Quarter_Target" =Val([Quarter_Total])/Val([Quarter_Target]) - Named "%Target" (Percent Format)
The report is grouped by the expression '[Surname] & ", " & [Firstname]'.I am trying to sort the records by the %Target text box. I tried entering the expression into the sort function but it still sorts by the grouped expression. I also tried sorting by the name of the text box but got the same results. How can I sort by the desired control?
I have created a report in Access that calculates the dates based on a date-type field in a query. I want to be able to use these calculated dates in another report and sort these dates in an ascending order. With the dates, I also want to display certain information from this report. Is it doable? Please let me know....ASAP if poosible...
This Works:I have a report with subreports that provide totals to the main report. The main report is grouped to provide the totals by customer. Here is the format:
I have a production report with 4 one to many sub reports (material reworked, reclassified, rejected, and issued). Each of those sub reports has a sum field totaling up the material reworked, rejected, etc for that lot.
I need a calculated field that subtracts the totals in each sub report from the reported amount produced in the main report.
Should I do this with a calculated field on the report. If so how would I reference the summed fields in the sub reports?
Or should I put a summed field of the amount reworked, rejected, etc in the query the report is based on and make a calculated field off that.?
I have created a simple booking DB, i am try to summarize the booking by centre and date so that when a user checks if there is availability the will be able to see how many have booked an activity and how many spaces are left, i have created a new field that calculates the spare places
I have a report with a number of calculated fields, and information that is pulled from the form that calls the report. Pulling the information is done in the Report_Load() event by setting the report.txtBox = Form.txtBox. When I open the report in acPreview all the calculated fields are populated as they should, and when I open the report in acNormal mode (which is what I want) the calculated fields remain blank.
I have calculated fields on my tables and used zero values as default to show totals. But when I view my report, all the zeros appear. Don't want those zeros to appear on the report.
I would like to make a report to show how many employees and which employees are attending to which colleges/universities.
In my data (800 records), I have two fields which is "College 1" and "College 2" for each employee.
There are values that are enter in college 1 for some employees, other employees have the same value that is enter in in college 2. How do I get to show a report that has all the employees who attended the same college in either college 1 or 2?
For instance, this is my raw data:
Name - College 1 - College 2 Bob - University of HI - Honolulu CC Sandy - Honolulu CC - University of HI Clare - Kapiolani CC - University of HI John - University of HI - Windardward CC
Suppose we have a report that outlines several fields, one field shows the City. In the report, this week, we see 10 records "New York", 8 records "Houston", 7 records "London", 3 records "Paris" and so on.
Next week's report outlines different cities and different number of records. I need to have in the report footer a "recapitulation" , a field that would say :
New York 10 Houston 8 London 7 Paris 3
Total 28
Next week cities and number of records might not be the same, we may have
Tokyo 12 Singapore 14 New York 6 London 7
Can i make my report in that way that it will count the values without using VBA ? I tried the count values option but it counts the overall report, does not take into consideration the different values.
My employer is using Windows XP Pro and Office 2003 (a few machines have Office 2010, but not mine). Furthermore, the machines are running the Japanese language OS, which has caused some comparability issues with my English XP/Office 2003 at home.
I have a form containing an unbound textbox, with the name MIS. The form's Current event has the following code:
If IsNull([[ResignationDate]) Then MIS = DateDiff("m", [NichiiGakkanStart], Date) + Int(Format(Date, "mmdd") < Format([NichiiGakkanStart], "mmdd")) ElseIf [ResignationDate] > Date Then MIS = DateDiff("m", [NichiiGakkanStart], Date) + Int(Format(Date, "mmdd") < Format([NichiiGakkanStart], "mmdd"))
[Code] .....
The calculates (correctly) the Months in Service of the employee who's information is being viewed.
Now, I am trying to create a report which lists the employees by work locations. The above , and other calculated information, is to be displayed in the report.
I used the wizard to create the report, using data from two different tables (employee & location).
I need to display the calculated information above for every employee at every location.
I have a database which gathers and stores the odometer readings of our company vehicles every month. I have built a simple report with columns for Vehicle Number, Employee Number, Employee Name, Month, and Odometer Reading. My boss wants a field for each employee which compares the records for the last two months and displays the difference (i.e. the number of kilometers travelled in that month) /
I need to display a value from a table in a text field on a form based on another text field on the same form.
The table has records as follows:
Month/Year xx Month No xx Year No xx Month ID (xx shows break in columns) Jan-06 xx 1 xx 2006 xx 24 Feb-06 xx 2 xx 2006 xx 25 Mar-06 xx 3 xx 2006 xx 26 Apr-06 xx 4 xx 2006 xx 27 May-06 xx 5 xx 2006 xx 28 Jun-06 xx 6 xx 2006 xx 29 Jul-06 xx 7 xx 2006 xx 30
In one text field I use the DateSerial function to calculate the value of the previous month (e.g.Jul-06). I need to return the MonthID value to the second text field based on the value stored against it is the table, so in case of Jul-06 it would show 30 in text field 2.
I have a report in which a textbox generates numerical values and letter values. I want to...On report load - if textbox = numbers then hide otherwise show if it contains letter values.
I have a report that has four fields: Item, Qty, Price and TotalPrice for each line in the detail section. Total Price is calculated by multiplying Qty x Price. The text box name that holds the Total Price for each line is txt_TotalPrice. I want to have a Grand Total in the report footer. I placed a text box in the footer with the following expression: =sum([txt_TotalPrice]). When I run the report Access prompts me for the parameter value of txt_TotalPrice. I've been trying to solve this for quite a while now - but I'm totally baffled.
I have a report and I am trying to Round Up the calculated field SumOfAccrual Amount to 2 decimal places. I am attaching a screenshot of my report and output.
I have an invoice system, where the payment due date is the last working day of the month following the invoice.
For example, if I produce an invoice on 5th June, the payment will be due on the last day of July. What I can put in a text box to automatically calculate that date, based on the Order date?
This is the order date formula : =[Forms]![frmInvoiceMain]![txtOrderDate]
I'm working with a report that totals the number of times a topic is returned from a query. If a topic is not returned at all, i don't want it to show at all. Currently it is showing a blank field for that topic name and blanks in the count as well. Here's the filter i've put in to pull the right data out of my query: =Sum(IIf([Caller Used Resources]="No",1,0))
I have a query that performs some calculations, these calculations feed into another query and produce a final value. If there are no null values everything works perfectly. But when there are null values, I get errors.
What I have tried:
1) I tried to implement the Nz function for each field of the formula that is not calculated but from user input.
2) I tried to implement the Nz function for just the field that calculated the last result before feeding into the next query, but it didn't show the 0 value I gave.
3) I tried to use UPDATE TABLE SET in SQL, but I don't think I was using it right. I tried to use it for all records but always got an error when it ran.
The first two above result in showing no values at all, even if there are some. The third didn't work. How to easily update null values in the query to 0? All I could think of was to somehow use Criteria or SQL.