Reports :: Field Not Listed To Add To Report

May 8, 2013

I have created a report but discovered that I need to add a couple more fields.

I created a query for the one field and the other field I added to the existing queries.

Neither field is listed in the "add existing fields" drop down list. The fields have been added to the corresponding forms and tables.

How can I add these two fields without creating a whole new report?

View Replies


ADVERTISEMENT

Reports :: Insert A Barcode ActiveX Control / But It Is Not Listed

May 30, 2014

I am wanting to insert a Barcode ActiveX control, but it is not listed. In an instruction video, after clicking on ActiveX Controls, the one named "ABarcode ActiveX" is at the top of the list.=how I can obtain this.

View 2 Replies View Related

Required Field Property Is Not Listed

Jan 3, 2007

We just upgraded to Access 2003 and I am creating a new database and in my Form... I was trying to set the REQUIRED FIELD PROPERTY to YES, but when I click the Properties of each field, it's not listed.

Has this been removed?

View 3 Replies View Related

Required Field Property Is Not Listed

Jan 3, 2007

We just upgraded to Access 2003 and I am creating a new database and in my Form... I was trying to set the REQUIRED FIELD PROPERTY to YES, but when I click the Properties of each field, it's not listed.

Has this feature been removed?

View 2 Replies View Related

Modules & VBA :: Find Field Listed In Queries And List Them

Oct 11, 2013

I have no experience with Access Modules which I think I need to find all the queries that reference a field, in this example: LAWSON_LHSEMPDEMO.R_STATUS

I would like for the module to list all the queries for me that reference this table and field of "LAWSON_LHSEMPDEMO.R_STATUS"

Is there an easy way to do this?

View 4 Replies View Related

Reports :: Get Remarks Automatically In Field Based On Other Field In Report

Dec 15, 2013

I made a report that have 'txtRemarks' field, I just want to get remarks automatically in 'txtRemarks' field based on the other field in report. that is why I used a function like below:

Code:
Private Function Estd_Remarks(Estd_Point As Long) As String
If Me.Estd_Point < 20 Or Me.Estd_Point = 0 Then
Estd_Point = "Earlier Established"
Esle
Estd_Point = "OK"
End If
Estd_Remarks = Estd_Point
End Function

And I wrote in properties 'On Format' event this code below:

Code:
Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer)
If Estd_Remarks = "Ok" Then
Me.txtRemarks = "Ranked & Sortlisted"
Else
Me.txtRemarks = "Estd_Remarks"
End If
End Sub

When preview the report then it shows
Compile error
Argument optional

View 3 Replies View Related

Reports :: Having Field In Report Change Based On Another Field

Sep 5, 2013

I have a report that is looking up min and max quality specifications for a product. The table with the specifications has a Yes/No check box field for when the specs are defined as "Internal". So the table looks like Product/MinValue/MaxValue/Internal

I want the report to display "TEST AND RECORD" when the Internal box is checked where the MinValue and MaxValue (that are stored in the table) would be displayed otherwise.

View 3 Replies View Related

Reports :: Generating A Field In A Report

Jul 30, 2014

I have a database with a bunch of related tables. One holds information on (let's say) types of food. A field in that table tells whether the food is HOT or COLD. Foods are grouped by MEALS in a related table - the PK of the foods table is stored as an field in the MEALS table. What people here are looking for is a report that lists all the foods in each MEAL, the temperature of the food, and whether the meal is HOT, COLD, or MIXED - foods are both HOT and COLD. I've got a report that lists all the FOODs, grouped by MEALs - it's just the overall temperature of the MEAL that I am missing right now.

View 9 Replies View Related

Reports :: Unbound Field On A Report

Jul 3, 2013

I have two numeric fields which make up what looks like a full decimalised number ie 20.22 - only I am unable to put the decimal point in between the two numbers.

I thought about putting in an unbound object such as a picture of a full-stop but cant get it anchored at the correct angle to make it look convincing in the report.As this is such a huge database I have tried to amend the tables, but it loses vital data ?

View 7 Replies View Related

Reports :: Date Field In A Report

Jun 6, 2013

I have a report where I added text then a date field based on a Table. In the table I have specified the "Co_ContractEndDate" for input mask as dd/mm/yyyy, however the format to display as dd mmmm yyyy. This works in the Form and in the report as it's own control text box, however when I merge the field with some text the formating changes.

My report text box is as follows:
="The Program Period for this Program will finish on " & Co_ContractEndDate] &"."

The output in Print Preview is:
The Program Period for this Program will finish on 30/06/2013.

I would like to show it as:
The Program Period for this Program will finish on 30 June 2013.

As a work around I have aligned the date field with the label field to get the outcome but as it is a sentence I would like to add a full stop at the end. how to show this text box in design view?

View 3 Replies View Related

Reports :: Calculated Field In A Report

Jan 27, 2015

I have a database which gathers and stores the odometer readings of our company vehicles every month. I have built a simple report with columns for Vehicle Number, Employee Number, Employee Name, Month, and Odometer Reading. My boss wants a field for each employee which compares the records for the last two months and displays the difference (i.e. the number of kilometers travelled in that month) /

View 2 Replies View Related

Reports :: Dynamic Field On A Report?

Jul 3, 2014

I'm currently creating an invoicing report for a company, and for record purposes they need a dynamic field on the report for the specific Invoice Number of each client they invoice. I have the field set up currently as a text box =[Invoice#] so they have to enter an invoice number when they generate the report. However, when I generate the report and put in a number, I'm getting some whacky outputs.

For example, I've tested it with a test client, and when I give the client an invoice number of 1, the report somehow changes it to 49.

View 1 Replies View Related

Reports :: Summing Calculated Field In A Report?

Jul 17, 2015

I have a report that has four fields: Item, Qty, Price and TotalPrice for each line in the detail section. Total Price is calculated by multiplying Qty x Price. The text box name that holds the Total Price for each line is txt_TotalPrice. I want to have a Grand Total in the report footer. I placed a text box in the footer with the following expression: =sum([txt_TotalPrice]). When I run the report Access prompts me for the parameter value of txt_TotalPrice. I've been trying to solve this for quite a while now - but I'm totally baffled.

View 3 Replies View Related

Reports :: Round Up Calculated Field In Report

Jun 25, 2013

I have a report and I am trying to Round Up the calculated field SumOfAccrual Amount to 2 decimal places. I am attaching a screenshot of my report and output.

View 2 Replies View Related

Reports :: Blank Data Field In Report

Mar 18, 2013

I am creating a report that contains name andd birthdate on one line. I need to have up to seven lines in the report for some groups, but do not want to leave blank lines where no names exist. I am working in 2010 and have read about canshrink in 2007, is this approach availabel in 2010 and for date as well as text?

View 1 Replies View Related

Reports :: Text Field Footer In Report

Mar 20, 2013

I have a form with attached subform from which I can choose which records to send to a report. All records in the base table have a comment text field for the user to enter additional data (comments). Typically, there are none, but when there is, if it is only a single record sent to the report, the comment is printed in the page footer. However, if there are multiple records being sent to the report and only one record has text in the comment field, unless it's the last record it the subform, it will not print in the report. There isn't enough room in the detail section to include the comment field (like I said, it's typically not used and when it is, they can be lengthy). Is there a way to get the comment field to print in the report page footer when it is not either the only record selected, or the last record?

View 4 Replies View Related

Reports :: How To Display Table Field In Report

Sep 2, 2013

I'm using Access 2007.

I have a Customer table that has a field "PostalCode" that is numerical an is connected to a field called PostalID in a table called PostalCode and has the actual postal code stored in a field call Pcode.

I have everything working ok as far as displaying the correct Pcode on the various forms. eg: is the PostalID is 10, I want the form to display the Pcode of 2000.

I can't figure out how to display the Pcode in a report.....

View 12 Replies View Related

Reports :: Suppress Data In A Field On A Report

Mar 4, 2013

I've got a report that is displaying addresses which are all identified as 'public' or 'private'. I want to be able to display the 'public addresses' and leave the 'private' addresses blank (but still show other fields.. phone no.s etc). The field that the data appears in is Address 1 (for both public or private), depending on what the data entry clerk has selected as the preferred address (ie public or private).I've been playing with the Iif function, but have not had any success...

Address Type: Private or Public
Address1: Address details

View 5 Replies View Related

Reports :: Character Limit For A Field In Report

Jul 16, 2015

In my table, I have a field for "notes" and have it set to long text. It works just fine and has all the text visible. When I create a report or a form from this table, it truncates the text in that field. It limits to the 254 characters of old. I am not sure how to fix this. I have tried setting the WillGrow to yes and it still does not work.

View 4 Replies View Related

Reports :: Counting Unique Field In A Report

Jul 19, 2014

I have a report which is based on a query. The query combines information from TBLDwgReg and TBLDwgRegDtls. The unique field linking these two tables is DrawingNo. The query - QRYDtldDwgReg - is showing 99% of the information I want to see.

My problem is this - one drawing can be revised several times. I have my report grouped by IssuedBy and then grouped by DrawingNo. In the group footer for IssuedBy I want to count the number of drawings issued by a particular consultant. For example...the structural engineer has issued 17 drawings for a particular project but when I do a count it is returning a total 27 because some of those drawings have been revised.

I tried grouping in the query and counting the DrawingNo field there but that's not working either.

View 14 Replies View Related

Reports :: Report Keeps Referring To Wrong Field?

Sep 30, 2013

I have a query[view] where I have six employee numbers, I left join these to an Employee table to retreive the names.

I've created a report that uses this query/view as its source. For some reason my report keeps making all six name fields refer to the same control source Employee.Name and not Employee_1.Name, Employee_2.Name, Employee_3.Name,.... respectively.

In design view everything looks fine but when I switch to report view the switch happens, it displays the same name in all fields. When I switch back to design view all of the fields have changed to the same control source.

why this is happening? My tables are in a SQL server.

View 10 Replies View Related

Reports :: Count IIF In A Report Field (2010)

May 22, 2014

I have an unbound field in a report that i'm trying to do the following:

=Count(IIf([Total Build Time]<=15,1,Null))

This gets me the closest to my answer. Tried it in many different variants, this will get me the total number of records, but will not use my criteria (<=15). The "total build time" field is formatted as short time 00:00 and i have tried my criteria in the same way...plus many more. This will count the records but will not limit the result to 15 or less.

View 4 Replies View Related

Reports :: Print Calculated Field Off Of Form To A Report?

Jul 18, 2013

Basically i have a form where i get info from multiple tables. On the main form itself i have 3 calculated fields for hours where i add all the hours i choose (from a subform) onto the main form.

My issue is i can create a query to come up with all the fields for my report, but how do i get the calculated fields on my main form on the report? Is there a way to print the calculated fields on the main form to a report? or do i have to do the same calculations on the report itself?

View 4 Replies View Related

Reports :: Line Breaks In A Memo Field In Report

Mar 21, 2015

I created a form with a memo field. Data is entered. How do I get the data to print on the report on separate lines rather than one continuous paragraph? For example: Entered in form:

2/1/15 visit to house. 2/2/15 ordered new locks for doors. 2/5/15 Locks installed.

Print view on Report:

2/1/15 visit to house.
2/2/15 ordered new locks
2/5/15 locks in stalled.

View 1 Replies View Related

Reports :: Can Fetch Calculated Field From A Form In A Report?

Mar 24, 2014

I have a form which works good enough. In this form, there is a text box that counts and calculates records from a subform. The name of this text box is "text1" ...

Can I fetch this "text1" field in a report ?

View 10 Replies View Related

Reports :: Display 50 Records In A Report Field In Two Columns Of 25

Nov 9, 2013

How to display in a report a field with 50 records in two separate columns of 25 records.Is this possible or am I completely off the reservation?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved