Reports :: Footer Information Moving Up Or Down Depending On Number Of Lines On Page
Dec 20, 2014
I am trying to create a report that has a header ( all ok ) then could have 1 or 15 detail lines ( all ok ) which contain cost for each line
then I have a footer with the subtotals of the costs and also bank details
then I have footnotes
What I need the report to do is keep the subtotals, bank details and the footer notes at the bottom of the page all the time weather I have one detail line or 15 detail lines
What is happening at this time is the footer information is moving up or down depending on the number of lines I have.
View Replies
ADVERTISEMENT
Apr 28, 2015
I was able to create only 3 pages in access report. I am not able to go beyond 3 pages since the page footer is not moving down, means I am not able to drag it down.
It is a simple report of resume with only text boxes. My report comes around 10 pages.
View 6 Replies
View Related
Oct 23, 2014
I am trying to create an invoice report. I want to add all the costs from the detail section in my footer. I have accomplished this in either the Report footer and/or the page footer, but the problem is that the report footer doesn't go to the bottom of the page, and the page footer doesn't go to just the last page. I have tested a bunch of suggestions that don't seem to work.
1. Print page footer with Report header = NO - only works if your report is two pages or more.
2. Private Sub PageFooterSection_Format(Cancel As Integer, FormatCount As Integer)
If Page = Pages Then
Me.[TextBoxName].Visible = True
Else
Me.[TextBoxName].Visible = False
End If
End Sub
The Page functions worked, but it did not change the results from page to page. If it was a two page report, then the if statement is false and the text box was not visible on page 1, but it also was not visible on page 2.
View 1 Replies
View Related
May 17, 2013
I've used the following code on the footer on print procedure:
Private Sub PageFooterSection_Print(Cancel As Integer, PrintCount As Integer)
Me.PageFooterSection.Visible = (Me.[Page] = 1)
End Sub
This works fine when you view it in print preview, but the footer don't show up at all when you actually print it.The reports default view itself is set print preview.
View 3 Replies
View Related
Jun 5, 2014
I have a 14 page report in which I want the footer to appear only on the first page. I accomplish this with some code in the OnFormat event of the page footer:
If Page > 1 Then
Me.PageFooter2.Visible = False
Else
Me.PageFooter2.Visible = True
End If
The first page has the footer (great).
The 3rd thru the 14th page does not (great).
The 2nd page also doesn't have the footer - but - it only shows a half page of data! The data continues where it left off on the third page!
So, to sum up:
1st Page: Footer with detail section containing 16 rows of data.
3rd thru 14th Page: No footer section with 28 rows of data.
2nd Page: No footer with only 16 rows of data.
View 2 Replies
View Related
Sep 27, 2013
I am struggling with building and If Then statement in my Report Footer. I have a report that pulls data from two tables...Students and Homeroom. This gives me a list of the students in each homeroom class and they are separated by homeroom. I would like to use a function in the page footer that counts the number of students who are members of our PTSA organization and then returns a percentage based on the total number of students in each homeroom class.
In the Report, I have on each page:
Page Header: Homeroom, LastName, FirstName, FamilyID
Details: LastName, FirstName, FamilyID
What I need is for the function to look at the FamilyID field and determine is there is any value entered. Then I need a count the total number of records in that homeroom and the total number of records with a value, so I can then get a percent of how many students actually belong to the PTSA in each homeroom.
View 9 Replies
View Related
May 7, 2015
Is there away to have the report footer only to display on the first page?
View 4 Replies
View Related
Mar 27, 2015
Is it possible to force a page break after 15 line items ....
View 3 Replies
View Related
Apr 20, 2014
How do I stop the report footer from printing on a separate page. I have seen several suggestions but nothing seems to work.
View 1 Replies
View Related
Nov 4, 2013
I have a form where we fill in information for supply of equipment to employees.
Each item must be signed for on a printed report.
I am encountering problems trying to create enough rows in my report detail for each signature of the items supplied.
For example, on the form I will select the "equipment" - 4 hats supplied and 3 boots. On the report I want the equipment set as the group and the detail to be a number or rows which equals the number of selected items. therefore under the Hats group heading I want 4 blank rows which are made up of 3 text boxes - Print Name, Signature & Date and another group heading for boots but with 3 lines.
View 11 Replies
View Related
Jul 7, 2014
I have a report that counts the number of monthly calls. What I would like is an average of the monthly calls in the report footer.
My total for a particular month is =Count([Date]) and I named the unbound control MonthlyTotal.
This is in the DateFooter section of the report.
I then put an unbound control in the report footer and used the expression = Avg([MonthlyTotal]).
Of course when I changed from design view to report view, it asked me for an input of [MonthlyTotal].
I then tried =Avg([Reports]![qryLetterWritersbyDate]![MonthlyTotal]) and while it didn't ask me for an input, there was nothing in the ubound control in the report footer.
I have search for an answer, but all I find is using a query. Is what I am attempting to do possible? If so, how?
View 5 Replies
View Related
Jun 20, 2013
I have a WO Table and a related WO Procedures Table. I would like to add a specific # of blank lines/records between each record but that # will vary. So the report will show the WO Procedure Desc then a specified # of blank lines below it and then the next WO Procedures Desc then a specified # of blank lines below it etc.
I thought to add a field to the Proc tbl called #ofLines and whatever number was entered would be the # of blank lines to appear below the record on the report.
View 3 Replies
View Related
Nov 22, 2004
I have a report that lists states and cities within the states. When a state name happens to be at the end of the page the individual cities appear on the next page with no State heading. I solved the second page problem by setting the "repeatSection = Yes" in the Section Header (though I haven't shown that in the example below).
But the previous page (which just shows the State Name and no cities looks dumb. Is there some sort of solution.??
(Actually I would also like any State that continues to a next page to not just have the state name but something like
" Colorado (Continued)" Is there anything I can do in VB to make a page break if the section is going to print but therer isn't enough room for one detail line?
This is what I currently see
Alaska
Ancorage
Prudo Bay
California
Whittier
Anaheim
Colorado
------------------------Page Break ---------------------------------
Denver
Pueblo
Colorado Springs
Deleware
Dover
-------------------------------------------------------------------------------------------
Thanks !
View 1 Replies
View Related
Feb 20, 2014
Managed to export a table to csv file. The problem I now have is I need to add the following Text at the start of the file:-
H,LKJ85485524,DE
and the new last line :- T,whatever the record count is,2
Whether this info is added before or after export is not important.
I have even resorted to using VBA to create an Excel spreadsheet and saving to csv.
Thought this had cracked it however I had surplus commas at head and footer where the original csv file had additional columns (ok manually delete these comas) ,then found that the end of each csv line was missing a final comma that is needed by the recipient of the file.
View 4 Replies
View Related
Aug 8, 2011
I need to send a large number of reports (actually 1 page invoices) as faxes. A few years ago I used to use a version of WinFax Pro with command line parameters to accomplish this. I would actually print each invoice to the WinFax Printer with a command line that contained the fax number for that client and using this method I was able to send each invoice to a different fax number (customer).WinFax is no longer available.
View 1 Replies
View Related
Mar 11, 2005
I have a report that is several pages long, the page footer I want to show only on the last page, how can I work out a counter/indicator to know which is the last page and be able to set the footer fields to visible
Jabez
View 2 Replies
View Related
Apr 7, 2015
Using MS Access 2013, part of Office 365, I am trying to construct a report that has a different first page footer than the rest of the document. Googling for answers has produced a few options, but none that seem to work. I have virtually no VBA knowledge. I was hoping that there might be some code that I could place in a label in the footer and have it work.
View 1 Replies
View Related
Sep 24, 2004
I have seen large projects in which there are clearly several printed database reports printed out to make one booklet.
1. How does one get page numbers for multiple reports to go in sequence instead of starting over again at 1 for each report.
2. How can you add a page reference in one report to something in another report?
Do you have to do these things by hand or is there a way to create a something with auto numbering capabilities? Do you do it by importing the reports to MS Word and creating a master document?
View 2 Replies
View Related
Oct 25, 2004
I need to be able to move 2 fields from the previous record to the next record. Does anyone know how to do this?
What I am doing is the following:
I have a table with 3 fields. I am using a form to enter the information. Two of the fields on the form will be information from the previous record. How can I bring that information forward to automatically be on the form and in the table?
View 2 Replies
View Related
Dec 29, 2005
Hi, found this forum looking for an answer to this question. Hope someone can help.
I'm trying to build a database that tracks electronic components. Mostly the database tracks location movements, but also repair issues and other possible changes. I'm thinking the best way is a database that has a record for each move, and any other changes are included in each record.
My question is, is there a way I can easily have the current information be propogated over to a new record, where it could then be modified? Example: I'm looking at a record of an item that was just returned to me. I would like to click a button on the form which would create a new record, then move all currently displayed information into that record.
Thanks for any help.
View 3 Replies
View Related
Apr 16, 2014
I am trying to split a field that typically contains a revision level and a revision date in a single entry as follows:
(Rev Level) {Space} (Date: MM/DD/YY)
REL 10-30-14
A 11-20-14
C 11/13/14
Note: dates use either - or / as separators. 99% of the time, there is a space between revision level and date.
Is there a simple way to write an update query to take the value in the current field, strip away all letters and spaces (but not - or /), and insert the remaining value into the revision_date field?
View 4 Replies
View Related
Sep 18, 2006
Hi,
I'm trying to get the maximum number in a table field to increase it by one depending on the member that is selected in a drop down in a field.
I have three tables: members, programs and times. Each member can have N programs and each program can be broadcast N times.
Each member has a three digit code, like XXX. Each program has the three digit code of the member + three numbers that are supposed to auto increment. That is, the first program of member X with the member code XXX is called XXX001.
What I'm trying to do is that when a new program is filled in and I select the member, then the program code should update automatically, adding one to the latest program by that member.
That is, if the last program by member X that was inserted in the database is XXX010, then if a new program is inserted it should automatically be XXX011, even though programs by other members have been added in between.
This is the code I use now, for the AfterUpdate when selecting the member in a dropdown in the form. But although I've played around a bit, I just get error messages...
Private Sub medlemsruta_AfterUpdate()
Dim medlemskod
medlemskod = Me![medlemsruta].Column(2)
Dim strMax As String
strMax = DMax("programs_kod", "table_programs", "Left$(programs_kod, 3) = medlemskod")
Me!program_kod = Left$(strMax, 3) & Format$(Val(Right$(strMax, 3)) + 1, "000")
End Sub
Medlemsruta is a dropdown where one selects the member from the members table, where the three digit code is in the third column (Column(2)).
I'm trying to use DMax to get the maximum number for the particular member and after that adding 1 to that for the new program code.
Grateful for any advice! Thanks!
View 3 Replies
View Related
Jun 16, 2014
I am trying to produce statistics reports in my database. The user selects the information they require in a form (date from, date to etc). A query then produces the results listing each job in turn which is what I want however at the end I would like to produce sub-totals for each client.
Depending on the criteria selected by the user, only some clients will appear in the list. Ideally I would like the footer to show something like:
Client 1 - 4 jobs
Client 2 - 1 job
Client 5 - 6 jobs
Client 6 - 17 jobs
I have tried using the field:
Code:
=Count([ClientDetailsName])
However this only gives the total number of jobs.
View 6 Replies
View Related
Oct 15, 2014
What would be the best table construction to allow for the inclusion of area information that varies depending on the selection of a certain route, to also include crossovers?
For example, if I had the following
R1 - AreaA, AreaC, AreaF AreaK
R2 - AreaC, AreaF, AreaL, AreaN
R3 - AreaC, AreaM, AreaN, AreaQ
How best to allow users to see all of the areas that apply to each of the routings, but not to be presented with the same grouping twice if more than one routing is selected at the same time?
I should add that I am looking to have these selectable by a combo that is filtered according to the value(s) in other fields.
View 5 Replies
View Related
Mar 30, 2015
I have a Form named Clients with a multi-page tab named TabCtl0.
The record source tables - primary key is [ID] , TabCtl0 has 7 tabs, the 1st named General.
The 1st 6 tabs show information from the same record.
The 7th tab contains a subform named Focus displaying continuous forms with 3 fields in each record including [ID].
What I am trying (for hours and hours without success) to do is to create a Macro that fires when I double click on a control within subform Focus that takes me to the page named General and selects the record where ID = the ID within the selected record of subform focus.
View 1 Replies
View Related
Nov 12, 2013
I have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.
View 3 Replies
View Related
