Reports :: Footer To Bottom Of Page Or Page Footer To Last Page Only
Oct 23, 2014
I am trying to create an invoice report. I want to add all the costs from the detail section in my footer. I have accomplished this in either the Report footer and/or the page footer, but the problem is that the report footer doesn't go to the bottom of the page, and the page footer doesn't go to just the last page. I have tested a bunch of suggestions that don't seem to work.
1. Print page footer with Report header = NO - only works if your report is two pages or more.
2. Private Sub PageFooterSection_Format(Cancel As Integer, FormatCount As Integer)
If Page = Pages Then
Me.[TextBoxName].Visible = True
Else
Me.[TextBoxName].Visible = False
End If
End Sub
The Page functions worked, but it did not change the results from page to page. If it was a two page report, then the if statement is false and the text box was not visible on page 1, but it also was not visible on page 2.
I've used the following code on the footer on print procedure:
Private Sub PageFooterSection_Print(Cancel As Integer, PrintCount As Integer) Me.PageFooterSection.Visible = (Me.[Page] = 1) End Sub
This works fine when you view it in print preview, but the footer don't show up at all when you actually print it.The reports default view itself is set print preview.
I have a 14 page report in which I want the footer to appear only on the first page. I accomplish this with some code in the OnFormat event of the page footer:
If Page > 1 Then Me.PageFooter2.Visible = False Else Me.PageFooter2.Visible = True End If
The first page has the footer (great).
The 3rd thru the 14th page does not (great).
The 2nd page also doesn't have the footer - but - it only shows a half page of data! The data continues where it left off on the third page!
So, to sum up:
1st Page: Footer with detail section containing 16 rows of data.
3rd thru 14th Page: No footer section with 28 rows of data.
I am struggling with building and If Then statement in my Report Footer. I have a report that pulls data from two tables...Students and Homeroom. This gives me a list of the students in each homeroom class and they are separated by homeroom. I would like to use a function in the page footer that counts the number of students who are members of our PTSA organization and then returns a percentage based on the total number of students in each homeroom class.
What I need is for the function to look at the FamilyID field and determine is there is any value entered. Then I need a count the total number of records in that homeroom and the total number of records with a value, so I can then get a percent of how many students actually belong to the PTSA in each homeroom.
I was able to create only 3 pages in access report. I am not able to go beyond 3 pages since the page footer is not moving down, means I am not able to drag it down.
It is a simple report of resume with only text boxes. My report comes around 10 pages.
I am trying to create a report that has a header ( all ok ) then could have 1 or 15 detail lines ( all ok ) which contain cost for each line
then I have a footer with the subtotals of the costs and also bank details then I have footnotes
What I need the report to do is keep the subtotals, bank details and the footer notes at the bottom of the page all the time weather I have one detail line or 15 detail lines
What is happening at this time is the footer information is moving up or down depending on the number of lines I have.
I have a report that lists states and cities within the states. When a state name happens to be at the end of the page the individual cities appear on the next page with no State heading. I solved the second page problem by setting the "repeatSection = Yes" in the Section Header (though I haven't shown that in the example below).
But the previous page (which just shows the State Name and no cities looks dumb. Is there some sort of solution.?? (Actually I would also like any State that continues to a next page to not just have the state name but something like " Colorado (Continued)" Is there anything I can do in VB to make a page break if the section is going to print but therer isn't enough room for one detail line?
This is what I currently see
Alaska Ancorage Prudo Bay
California Whittier Anaheim
Colorado ------------------------Page Break --------------------------------- Denver Pueblo Colorado Springs
I have a report that is several pages long, the page footer I want to show only on the last page, how can I work out a counter/indicator to know which is the last page and be able to set the footer fields to visible
Using MS Access 2013, part of Office 365, I am trying to construct a report that has a different first page footer than the rest of the document. Googling for answers has produced a few options, but none that seem to work. I have virtually no VBA knowledge. I was hoping that there might be some code that I could place in a label in the footer and have it work.
I am using MS Access 2003.I have a report whose Detail band contains a zero-height Comment field positioned at the bottom of the other single row of fields. It has Can Grow = Yes, so it sits waiting to grow if there's any data in this Comment field.
However, when this report prints, if the Comment field just "happens" to straddle two pages, it gets positioned only on the first page and gets cut off in the process. (See attachment 2.) Ideally, the entire field should display on the second page instead.
If I adjust the margins in Page Setup, I can fix this on this particular report. However, depending on the data being reported, these new margin settings can create a problem for the same report with different data. (All depends on where the Comment falls.)I'd like the report to work consistently, no matter the data or margins.
I have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.
If I have a report and it has controls (labels representing column titles) in the page header. Now when I print the report - if it happens that the last page has no detail records - but there is text boxes and so forth in the report footer. Is there a way to not display the page header on the last page?
I have a report where the last page shows the page header - and the field/column labels on the page header - but for which there is no detail records left to display - on the last page. There is report footer information that should display. It just looks weird because the field/column labels show at the top of the page - but there is no data remaining to print under them on that last page.
I have a report which is grouped by employee number - each group can have one or many records displayed - it works fine, but can look untidy sometimes when there are more records than will fit without wrapping onto another page; this is particularly prevalent when there are two or three groups - the third one may run over onto the next page, without group headers.
Is there anyway to force a page break at the bottom of a group if that group is not going to fit on the current page in its entirety?
I have seen large projects in which there are clearly several printed database reports printed out to make one booklet.
1. How does one get page numbers for multiple reports to go in sequence instead of starting over again at 1 for each report.
2. How can you add a page reference in one report to something in another report?
Do you have to do these things by hand or is there a way to create a something with auto numbering capabilities? Do you do it by importing the reports to MS Word and creating a master document?
I have a report which shows the results of two separate queries in a simple table view.
One set of data varies in size depending on the amount of records and the other is a fixed size and never changes.
I'm wanting to make my report always show the fixed size data in the bottom right corner of the page when its printed.
I've tried putting it in the footer section of the report but don't want it to affect the size of the details section and just show next to the other query results.
Is this possible and if so how would I achieve this?
I have a data access page needs a filter by a dropdownlist, the dropdownlist used is a html control and I use javascript to filter the data programmaticlly in the onchanged event of the control.
MSODSC.DataPages(0).Recordset.Filter="AppID = 3";
My problem is, when this statement runs, the page refreshes. But I don't need the page refreshes, it set the dropdownlist text to the default text, not the value user select. The browser is IE7.
I have one-page forms which print a second page, blank except for a block of grey shading at the top. I have tried moving the content of the form up but that doesn't eliminate the second page. If I look at print preview, every second page of the entire database shows up as blank, regardless of where that happens to appear in the record.
Is there a way to have a datasheet open with the last record at the bottom of the page? I now have it opening to the last record, but it has the last record at the top and can't see the records before it without scrolling.
to automatically create a second, third, fourth... page depending on how many characters are in the narrative. The only other thing needed to be changed is the page# of Page#.
I have added the Allen Browne Calendar 2k control to my form.
My form consists of 4 pages. On pages 2 and 3 I have subforms and on page 4 I have Personal data. Page 1 is general data and the Calendar is on Page 1.
What is happening is that the Calendar is also being displayed on my 4th page, in the same position as page 1. When I try to move it, cover it or delete it from page 4, it is also gone from page 1.
I have a form with six tabbed pages on it. Since data entry follows in a logical order I would like to put a command button on the bottom of each page (subform) that can be used to go to the next page. What I am going to though? If i put a command button (open form) then it opens the whole form not as a subform on a tabbed page. if I try and put a command button (open page) then it will not let me enter the page number. Hope that makes sense! Any ideas
