Code:
Private Sub Command37_Click()
Dim db As DAO.Database
Dim rsItems As DAO.Recordset
Dim SQL As String
Dim currentItemNumber As Long
[code]....
adding record set in report and displaying a report..i want every record to pass thru recodset and create a report for every record separately
I work with SQL Server 2008 with Access 2007 front end (using ADO). I can easily populate form controls using recordset. It does not look like I can do the same with reports.
View 3 Replies View RelatedI have a report when i send units back to the customer, the report generates an ID in a list box (a query picks the last ID used and adds 1)
after the report prints i use an update query to mark the units as "shipped" with the dates in the main table. i need the update query to use the value from the list box to update the value in the table.
I have a report based on a query.There is a field in my personnel table and the query: [Field] with values from my lookup table and has three choices:
1-Inspections
2-Administrative
3-Safety..
I have a report and would like to filter based on [Field].I can filter by putting [Field]=Inspection on the Filter On Load, then typing 1 into the parameter box. And it works.I cannot however choose more than one of the three choices and I have to type the number in. Fine for me but it won't be for other users.it is used for more than one report. I would also like to avoid having seperate queries for all these reports.In other words, I would like to filter the report, not the query.
I want to be able to run a report based off my "Allot_Q" query. I have a button to perform the report but would like the button to update the query and run my report based on my selection text boxes. Right now I have one button the runs the query based on the selection and then another button to run the report. My boss wants one button to pull the report based on the selection.
View 1 Replies View RelatedI am having trouble getting data to appear on my Report. The report is based of a Query, qryLabel. When I run qryLabel the correct data is displayed but when I try to use this data on the Report, I get an #Error or #Type. Here are the methods I have tried so far to get the data on my Report:
DLookUp
=DLookUp("[StoneLength]","Stones","[StoneName] = Forms![Product]![ProductID]")
Using The Query
=[qryLabel]![StoneLength]
Using the Table
=[Stones].[StoneLength]
I am relatively new to writing databases in access, I did some a long time ago, but cant remember what on earth I used to do.
I have created a database with all the information I need it and have a query set up that gives different results depending on the information the user has entered
The user decides what the query will display though a form.
I want access to generate a report with the information in it that the query chucks out.
However the information the query gives changes every time depending on the user input.
there is a query and report "01 qry Main" and from the main FORM I like to print out into txt file actual record, my code is:
Private Sub Command24_Click()
On Error GoTo Err_Command24_Click
Dim stDocName As String
stDocName = "01 qry Main"
DoCmd.OutputTo acOutputReport, "01 qry Main", acFormatTXT, "D:10 DbaseCTQ stuffsaveReportFormat.txt", False
code]...
there should be an option "ID = " & Me.ID.Value or something like this to print out only actual record.
Using a table with employees, I created another with equipment that uses a lookup to assign each piece of equipment to an employee (more than 1 piece of equipment can be assigned to each employee)
I want to be able to select records using a form, either by checkbox or listbox of which employees to include in the report that shows what equipment each is assigned. The problem I am having is creating the form/code to create the and/or query to generate the report.
I have a report that takes numbers from a query
as an example
To be migrated - 50
Migrated - 30
Excluded 10
were each number comes from a query field..Can I add say Migrated and Excluded within the report and possibly other calculations that I may wish to include.
Everytime i make a report in Access, first thing i do is build a query and then use it as a record source. I try the other way, I go to create report design directly and do the drag and drop of fields.
View 2 Replies View RelatedI have a query that pulls the records by month and year this worked great
Query is set up as
Field: Month: Format([ErD],"mm/yyyy")
Criteria: [Enter Month and Year (mm/yyyy)]
But I need the Month that is pulled to display in the report header along side the report header text without the user needing to enter the Month again.
Example report header: January Things you need to know.
I created a Report from a query. The query shows the correct data that should be on the Report. I created the report to sort by Field A and then sum Fields D, E, & F. None of the query data shows up on the Report. I;m stymied as to why I can see data on a query, but the ONLY data that shows up on the Report is Field A. None of the summations show. All are blank with the box outline.
I've created the report 3x thinking I did something incorrect. Whatever it is, I did it 3x!
Is it possible to add a query to an existing report? I use Access, not VBA.
View 1 Replies View RelatedI have a query where I ORDER BY ClientId, MatterId and Transdate. The result of the query is correct. All of the transdates are in ASC order within the Matter.
When I run the report for a MatterId the relative transactions are not sorted on transdate
Can there be something in the report that could be effecting the order of the transactions.
I have a report (report1) which is based on a single query (query1).
There is a second query (query2) which returns just a single value (say 100) and I want the result of the query2 to appear at the bottom of the report1. The query2 is not related to the query1 so I cannot join them.
When I insert a text box in the report1 and choose the query2 from the control source Access gives the error, "The Microsoft Access database engine does not recognize '' as a valid field name or expression".
Objective to have a report generated from a query (Based on a Storage Table) in the record-source however need to make adjustments to each record based on the query output ie User Id is outputted as number as it needs to be for everything else but on the report loading needs to run an sql query on that ID number to get the name and then replace that value with the name and so on for each record and each appropriate column
Problem:I can either change All of the records outputted with the first records info or nothing at all. i need this process to occur individually on each outputted record
We have an Access 2003 database used by a small number of staff located in different towns. One of the reports is generated using a query by form.
Two users located in the same office recently upgraded to Access 2010 don't get the same results for this report as I do (I still use Access 2003).
Other staff located in different offices use Access 2010 and get the same report results as me.
I want to present some data in what seems to me like it would be a very natural and normal format, however have so far been unable to figure out how to do it.I record attendance data for a children's after school club in a table as follows (simplified):
AttendanceID - autonumber
AttendeeName - text
AttendanceDate - date
Attended - True / False
The data looks like this in the table. I would like to be able to easily see who attended on which days, so I would like to therefore see the data laid out like this:
The Crosstab query looks almost like it would do what I wanted, however it seems to insist on adding something up, rather than just showing me the value true or false.
I have a report, based on a query, where the field name is "Date of Work". The criteria in this query field is >=[Start Date] And <=[End Date], which works fine. However I need to have the start and end dates to show in the resulting report header based on the query.
View 1 Replies View RelatedI can't get my reports' unbound field's to display the criteria parameter I enter when report is opened. I have done this before but not in Access 2010.
In my parameter, I do have a long string inside the brackets (e.g. =[Enter START Date "1/1/14" or Leave Ranges Blank to show ALL]). I am wondering if this or the quotes inside the brackets are causing it not to work.
I am trying to discover the code that is asking for a phantom query in Subreports. Each Subreports control source query works fine.
I have attached two zipped files
1. Database stripped to send
2. SnapShots of the problem.
I made a report with following crosstab query.
TRANSFORM Workersdetail.workername AS CountOfedate
SELECT Workersdetail.[attendance], Count(Workersdetail.[edate]) AS [Total Of edate]
FROM Workersdetail
GROUP BY Workersdetail.[Workername], Workersdetail.[attendance], Workersdetail.[workerhourenter]
PIVOT site+Cstr([workerhourenter])
I wanted to know that, is there any option through which my report gets autoupdate or refresh incase of addition in SITE field (as mentioned with PIVOT)?
I've got a self updating crosstab query, its essentially a monthly summary and every month a new column is added (one corresponding to the current month, i.e., next month the new column will be may, following that the new one will be june, etc)
I've designed a report to be based on this query and i tested it out by manually adding data for next month into a table, the query auto updated however the report remained the same (ended in april instead of adding a new column for may).
Just curious if there is a way to automatically add these new columns to the report every month or will i have to do so manually?
I have created query and all my values come into the table from the query fine.
When i then go and generate the report all of the boxes are there for the data but there is no data in them. For owner and Job Id all info is there but job name, Department and a few others there is no data in the boxes.
I have a report that runs off a query that is sorted in descending order the price of something. This price column is in the middle of the report. Every time I try to add a function (sum or count of a column for example) in the report footer or header however, my report is then immediately resorted in ascending values of the first column.
View 2 Replies View Related