I am trying to select a few values for my report, can this be done in the report design view or do I have to make a query and take from that?
I am using access 02!
EDIT: I want to leave out all the values that are 0!
I have a report in which a textbox generates numerical values and letter values. I want to...On report load - if textbox = numbers then hide otherwise show if it contains letter values.
View 9 Replies View RelatedHi there,
I've a button that position the table on a new record:
DoCmd.GoToRecord , , acNewRec
And I create a button to cancel that action:
Me.Undo
But the code field (autoincrement) continues autoincrementing! Explaning:
1. I click on "Add" button
2. The table's positioned on autoincrement code #1
3. I click on "Cancel" button
4. The register is cancelled, it isn't includded on table
5. I click on "Add" button
6. The table's positioned on autoincrement code #2 and the #1 isn't exists...
How it's happen? How I solve it?
Thanks
Hai guys Iam looking out for a sample DB for employees leave management.
# With leave application form
# Leave approval form
# Leave status
# All with username and password
Kindly help me out.
Hi,
I have 2 tables... one with 'answers' (on questions) and one with these 'questions'.
Now I want to show the questions with their answers on a rapport
(based on a query) .. but only these whereby the answer-field is NOT NULL..
So I have already:
ansques1: IIf([answers.1] Is Null;Null;[questions.1]+" "+[questions.1])
But now if the answer-field is NULL, then the ansques-field is also NULL...
I want if the answer-field is NULL, to have no new field.. like ansques1.. just want to leave it out of the query... can someone help me with this?
Thanks in advance,
Ankie
I have an unbound text box that displays when certain criteria exits, which I placed in the Form's properties, "On Current" ...
If [Decor6Date] <= Date - 30 And [NonrecommendQuestion] = 0 And IsNull([DateDecReceived]) Then
[LateDecoration2] = "Late Decoration"
Else
[LateDecoration2] = ""
End If
I then made a timer event to show/flash the message
Me!LateDecoration2.Visible = Not (LateDecoration2.Visible)
Everything works fine ... the problem is the message will only flash if I exit the record then return to the record. How can I fix that problem? I tried Refresh ... no luck.
Any help would be appreciated.
I have a database with shifts in for staff. They have a bunch of times in and times out over a four week period. I have gotten an average weekly amount of hours for each staff member based on this but I need another equasion to work out their leave entitlement. It breaks down like this...
Average weekly hours x 5.6 x number of days working in this period (ie start date and end of financial year day count) divided by number of days in the financial year (ie 1/4/2015 - 31/3/2016 day count)
I'm just wondering of a way to do the day count based on me keying in the start date of the staff member (default 1/4/2015) and that access can work out the days in that financial year left and the actual days in that financial year.
It sounds simple enough but I want to get it to automate based on my start date.
I am trying to create a database to record employee sick leave and to indicate when an employee has surpass they allotted sick leave yearly.
I have the following tables and attributes
Employee Table
ID#, FName, MInitial, LName
Status Table
Category
Allocation
Transaction Table
EntryDate
StartDate
EndDate
TotalDays
Certify?
DaysBalance
Category indicates if a person is Temporary, Appointed or Substitute and Allocation indicates how many sick days is allocated per category yearly. I place both in the same table so when the status is selected the allocation is autofill
I am thinking of creating a form with the Employee Table info at top and a subform with the status and the transaction information.
I would like when a new year begins the sick days not used is discarded and a new allocation of days per employee is generated also when an employees status is change how to deal with that. When an employee used all of there sick days is there a way to have all those names display when you open the database.
Trying to modify this calendar database to track employee leave. I need the calendar form (frmCalendar) to show all employee leave on the calendar using the "Show All" command button on click event. This works if I specify a uID (UserID from employee table) in the code, but only for that specific employee. I need all employees at the same time up on the calendar so I can see if there is more than one employee off on any given day.
Events or leave is populated on the form through "Private Sub DisplayEvents" and the mdlCalendar module.
Using Access 2010
I am trying to get calculated fields in my report to work but zero values in the data are throwing up #Div/0! and #Error! and #Num!
The main data fields I am trying to work with are:
VehicleReading
PreviousReading
VehicleLitres
My aim is to track mileage and consumption for a fleet of vehicles and show daily and weekly averages in mileage and consumption and then to flag 20% increase in consumption.
I have a calculated field in my report named Kilometers,
= [VehicleReading]-[PreviousReading]
and also a calculated field named Consumption,
=[Kilometers]/[VehicleLitres]
My sum and average calculation fields in the group footers are only working where there are values above zero in the Kilometer and VehicleLitres and Consumption fields.
In reality there are some days where there has been no travel, so some records will have a zero for the Kilometers field and there are also days when there has been no refueling so there is a zero for the VehicleLitres field.
I have tried using the expression builder to create an IIf function but to no avail.
I have tried copying the syntax suggested by the Expression builder:
«Expr» IIf («expr». «truepart». «falsepart»)
I know I need to get those zero's to fail in the calculation but as I said before all of the suggested expressions I have tried fail due to syntax!
I inadvertently deleted my previous thread. Sargeant reply to my previous thread recommending using the 'Union' statement. I did and below are the results. Below is what I used. Please advise. Thanks again ! ! !
SELECT Table1.Column1, Table1.Column2, ""
FROM Table1
UNION SELECT Table2.Column1, "", Table2.Column3
FROM Table2;
Results
NewTable
Column1 Column2 Column3
A...............................3.1.......
A...............................3.2.......
A...............................3.3.......
A...............................3.4.......
A...............2.1.......................
A...............2.2.......................
A...............2.3.......................
A...............2.4.......................
I have a form with an image embedded in it. I want to be able to click on the image and leave a "dot" or "mark" where i have clicked, allowing me to click in multiple places on the image and leave multiple "dots"
I am assuming i need to crate a new shape each time i click, how is this done?
Hi Guys,
I`ve searched the forums, but not knowing the terminology, i cant find what I`m looking for.
I have a table which is use for a drop down list in my forms.
This is saved into a table, but shows up as a numerical instead of the name value.
Also In reports, I get a numerical value, instead of the text value.
Is there something I`m over looking ?
Or am I doing something totally wrong.
My relationships are correct. and the field data is right, I just cant over come the number issue.
Thanks in advance.
I have devolved two reports which receive their data from the same query. I could not fit everything in one report as I am limited by Access’ 22 inch limitation. I would like to enable a user to run the reports off a Macro. The report/query requires the user to enter a “Parameter Value” such as date and facility number. When running the Macro it requires the user to input the same “Parameter Values” twice, once for each report. What I would like the Macro to do is only request the Parameter Values once. Is there a simple way to achieve this? Thanks for any assistance.
View 2 Replies View RelatedI am trying to do DSUM as a control in the footer of a report which would sum up values in one field [Charge_Qty] only if certain criteria are met for another field [CPT_HCPCS_Code]. The problem is that I cannot use the proper syntax for the multiple criteria but am successful if I only have one value in the criteria. ok this works below but I need to use multiple values such as 93303 - 93321, 93662, 93350-93352
=DSum("[Charge_Qty]","DIVISIONQueryDATEYEARTEMPLATE","[DIVISIONQueryDATEYEARTEMPLATE]![CPT_HCPCS_Code] = '93303'")
As part of the report I'd like to have a table that would list all different values in column in column A and the number of times they appear in the table in column B.I have a bit of a hard time how to populate the table the easiest way.I have all the values in a separate source table, so first column is easier. but do i have to write the dcount statement for each row for second column?Could I display results of query as subquery in report.If you have a bunch of textboxes with increasing names like NameBox1... for for/next loops in reports... is there an easy way to assign those names?
View 9 Replies View RelatedI have a list of departments, 1-17, where each needs a SUM of their price for each end of day.
At first I was going to make 17 queries, and place each into a new sub-report, but there must be a way to list all 17, even if they haven't had a sale put through.
I've tried linking using "show all values in tblDept and only those that match in tblOrder" - but I cam across a very obvious issue.
The items are grouped by Z1 Number, a unique number for the end of day sales. If there is no department linked to a Z1 number, then it won't show it. For example, if there were no sales in dept01, then there is no record under tblOrder to show a Z1 number for dept01 - so there is nothing to link to in the report.
I was then thinking of creating false data at the end of day so the Z1 number mentioned each department at least once, but that would get messy and not 'normal'
I'm thinking of a type of loop to generate the report so a 17 row report is generated,
I have a report being generated that pulls in a bunch of data. The processed column is a boolean value.
I want to be able to set the text of a label to be equal to the "material cost" for all the rows where is processed is set to false.
Picture of the report: [URL] ....
I have a textbox in a report that I would like to calculate the sum of values that are less than 600.Then have a second textbox that counts the number of records that have values less than 600..This is based off of a query with calculated fields..I have been working with a formula that looks something like this
=Sum(IIf([BaleETime]="<600",0))
But all I get is a value of 0.BaleETime is the elapsed time between bales.
we have a field in a report, and currently, there is a text box with a control source of
=IIf([Flag1]="Capital",[Reserve]-Sum([Text52]),"")
They want me to add to it, where if [Text106]="0",[Reserve]-[Text52], otherwise it's [Text106]="0",[Reserve]-[Text106].I am able to do this second part OK with
=IIf([Text106]="0",[Reserve]-[Text52],[Reserve]-[Text106])
But then I lose the [Flag1]="Capital" part.
However, the data is now showing on the generated invoice.The rest are showing up but one.I went back to the tables to check and there is data present.It used to work until recently.
View 3 Replies View RelatedI would like to make a report to show how many employees and which employees are attending to which colleges/universities.
In my data (800 records), I have two fields which is "College 1" and "College 2" for each employee.
There are values that are enter in college 1 for some employees, other employees have the same value that is enter in in college 2. How do I get to show a report that has all the employees who attended the same college in either college 1 or 2?
For instance, this is my raw data:
Name - College 1 - College 2
Bob - University of HI - Honolulu CC
Sandy - Honolulu CC - University of HI
Clare - Kapiolani CC - University of HI
John - University of HI - Windardward CC
I want my report to show:
Colleges -
University of HI
Bob
Sandy
Clare
John
Honolulu CC
Bob
Sandy
Kapiolani CC
Clare
Windard CC
John
I have a frmOpenReport which has 7 combo boxes linked to 7 Query's.
I have found code to add selected values from one combo box from a button 'Open Report' to a report but struggling to find how to select selected values from all comboboxs and add to a report.
My code so far.
Option Compare Database
Option Explicit
Private Sub cmdOpenReport_Click()
On Error GoTo Err_cmdOpenReport_Click
Dim strWhere As String
Dim ctl As Control
Dim varItem As Variant
'make sure a selection has been made
If Me.HLO.ItemsSelected.Count = 0 Then
[Code] ....
I am very new to access. I have made a database that holds certain company information.
As part of a process a company must fill in and complete form and send to me and once they have I enter a 'yes' to the form and then link directly to said form.
I am wanting to be able to run a report to be able to only see the companies where a certain field has not been filled in.
For example I have a field for doc 698, if I have had this form back I enter a yes in this field, if I havent had this back I leave it blank and these blanks are what I want to pull off in the report.
I have made queries and then just filtered to show blanks but I would like to have in report form.
I have a query which returns values from a table, as follows:
Service_Date
Supervisor
EExpect
EAchieve
OExpect
OAchieve
IntLossOP
IntLossEN
This is used for a report for a 28-day period (the query selecting the Start Date and the End Date), and the intention is to show the information grouped by Supervisor, showing the information for as many days as they worked.However, I would like to have the overall 28-day averages of the six fields EExpect thru to IntLossEN shown underneath the detail for each individual. I know I could do this in Access Totals in the page footer if the report was confined to one supervisor, but with up to 20 supervisors I am unsure how to get these totals after the detail for each?
I would also like to have this summary information for each individual presented on a separate page at the end of the report (almost like a league table, if you like), so there is a single page that shows the data for each supervisor in comparison to all their colleagues.
I have show results of scores on a graph but need to show if those scores fall below, in between or above acceptable limits. For example, lets say the acceptable range is between 10.5 and 15.6 but people can scores between 0 and 50. So what I need to do on a report chart/graph is show the actual scores in columns, let access automatically adjust the scale, but have the area between 10.5 and 15.6 on the scale highlighted or coloured or perhaps indicated by two horizontal lines across the chart/graph.
View 5 Replies View Related