What I mean is I want four columns in the same paper if there is more than 4 records they will go to a new page
Detail form
Name |roy. |tony |elie. |piter|
Father |salam. |paul |jad. |john|
Family |jalbout |eid. |saad |diab |
Mother |hilda. |nada |pam |saly |
Is there a way to have alternating colored records so it is easier to read in a report..Is there a way to have a line around each record to set it aside from other records so they don't blend together.
View 3 Replies View RelatedI have a report where I would like to count the records. I can do this in a typical way to count the records but I'm a little stuck on this scenerio.
In my report I pick a date range of 04/01/2013 to 04/30/2013 it displays all my records. I have 3 records for 04/01/2013 what I would like is for that to count 1, not 3. So on and so forth - so it will show me at the end of the report how many times a week they worked. Is there a way to do that?
The highlighting shows what records are duplicates. Those are the only records that need to change. Not every field of the record is a duplicate, and I don't want some of the fields that are duplicates to be combined.
If the result I want is not possible, or way too complicated for me is there a way to just have this: [URL] ....
Basically, I'm just getting rid of the sum within the merged record.
Note: I want this information to show up in a report. I put the information in the images into excel just to make it easier to show. Also, if you end up testing this yourself could you provide me with your Access document.
Greetings,
I will try to explain briefly my problem.
My database is for our job card analysis.
The problem being sometimes a job card invoiced for the previous month
is only entered in the DB after reports have been generated/printed.
My thought was that if I could put a true/false check box in the record table
to somehow mark it as true after printing month end reports.
Hence late entries will reflect in the following months reports.
Is there a way of marking all the records as "reported" (True) after printing the report?
Maybe I am thinking along the wrong lines. Any suggestions?
Many thanks,
Brian.
Zimbabwe
I'm currently working on a report to show the differences between two records (in this case, Documents). Each Document contains a number of paragraphs which are separate objects within my database. The purpose of this is to narrow down which paragraphs require reading (i.e. remove/highlight which are duplicates).
I've set up the report to show only the paragraphs from two selected documents (I don't think there is need for more than two, but how to select two or more documents for the query), and currently I have set the 'Hide duplicates' which kind of works but not the result I was hoping for - it only hides the related field and leaves the original in tact.
I am looking for a method that hides both duplicate records (not just the duplicated fields) if possible, failing that a method that will conditionally format the remaining duplicate or all duplicates.
Looks like the Hide Duplicates hasn't quite worked either - I have two fields which are clearly different and it has hidden the longer one. Likewise another later paragraph is not duplicated and it has hidden another which isn't duplicated. If it makes any difference the field is of type 'Memo'
I am using Access 2007.I have a report that has 2 subreports within it.One of the sub reports input is from a table (Work Order Parts) whose records have a field called "DisplayOrder". This is a numeric field that I use to enable the user to specify the exact order that they want the records to be displayed in a form or report...well that's the plan anyway.
I can't seem to get the subreport to sort on the "DisplayOrder" field.
I have tried to set the Property value "Display Order" to "[Workorder Parts].DisplayOrder" but this doesn't seem to make a difference. The "Order By on Load" is set to "Yes".
Here is the "Record Source" value : SELECT DISTINCTROW [Workorder Parts].*, Parts.PartName, [Workorder Parts].Notes FROM Parts INNER JOIN [Workorder Parts] ON Parts.PartID = [Workorder Parts].PartID;
What am I doing wrong?
I have a subform to select which Managers will get a Corrective Action Report based on a single Non-Conformance ID. The queried information looks like:
ID Managers
01 QA Mgr
01 Maintenance Mgr
01 Shipping Mgr
How can I access this data 1 record at a time in order to have each Manager name print on a separate Corrective Action Report?
How do I format:
First 25% of records - Gold
Second 25% of records - Green
Third 25% of records - Yellow
Fourth 25% of records - Red
I have a button on a report that I want to use to confirm if the contents of a field were prepared or not. Below is the button vba:
Private Sub Command60_Click()
'retrieve the records
Static Count As Integer
Count = Count + 1
'
Select Case Count
[Code] ....
The problem with this is that it changes the text and background for every button in the report. I want the button to change its text etc for individual records in the report. and not all at one time. In other words I want each record to have a button, and each button associated with each record.
I have a table with those fields:
Name date(d,m,y)
John smith 1/2/2013
Mary loe 25/2/2013
Mary loe 1/3/2013
Jim tonel 3/3/2012
Jim tonel 5/3/2012
I want to create a report or query that will calculate how many times a name appears in current month(03/2013) and if not it should return 0.
For example the report or query should look like this:
Name count
John smith 0
Mary loe 1
Jim tonel 2
I am trying to get the number of records under the value of 6 ... E.g. On the report it looks like this
Code:
Date Result
1 5.6
2
3 8.2
4 6.6
5 4
6
7 10
And the code I am using is
=Count([Result]<6)
The resulting answer is 5 , when the correct answer should be 2
Need a sequential number on report. Have an unbound text box and set it to list a running sum over group. The twist is that I'd like to have it start with an assigned starting number [Starting Number] and then add 1 to each subsequent record. It works for the first record but then the next record is last value + [Starting Number]. Basically it is a check run where I would list the starting number and the report would do the rest.
View 2 Replies View RelatedI have record in wich I would print the records whose fields A is filled but not field B or Field C is filled and not field D.
See appendices.
In a report, I have a textbox to show the number of employees in the report.
I use this formula : =Count([last name])
Sometimes the same person has multiple entries, so the count is wrong.
How can I show only the number of different employees and ignore the duplicate names?
In Access 2010 I am previewing a customer report. I also try to give users the choice of seeing history sub records for any given customer. I have a selection dropdown box where they can chose ALL, 5, 10 or 15 in a report. To this end I set the record source in the "Open" event for the subreport. if I want all records it works fine, but as soon as I put in "SELECT TOP 5" the subreport goes invisible. I have tested the query directly and it works fine. I'm sure this worked in Access 2007
View 3 Replies View RelatedI have a bunch of records that are assigned to categories which are problem tickets. I would like to print the report showing not just the categories that have records open in them now, but also ones that don't have any records in them. So say I have these three categories. Power, Circuit, Hardware failure..If I have a few open tickets in circuit and hardware failures and none in power. Power will show show up on the report but with no records listed underneath it.
View 1 Replies View RelatedThis probably is a very stupid question but I am a new user and have been pulling my hair out for a week over this. I have created a report and linked it to my table but it generates a list of all of the values in my table on the report. What I want is a way to generate a report page for every row in my database table grouped on a key record that is unique to each data row. If anyone has any advice it will be much appreciated, thanks.
View 1 Replies View RelatedI have a report having data from query i have taken only 4 fields from query in detail section of report in design view.
What i want is that the report to print for single record single page means currently it is printing one more record on one page which i don't want and i want the report to show or print like all four fields for one record on one page how to do this...
I am creating a report that is organized by project. The detail lines are to list payments applied to the project. How can I skip the detail section (or print a single blank line) if there are no payments in the separate payment table that match the project ID? Is there a way to tell that there were no matching payments and format accordingly? I currently get multiple blank lines.
View 2 Replies View RelatedI'm having trouble with one of my reports. attached is a screencap of my report. The second name which is highlighted i need to either nudge it to the right so it is not directly under the first name OR remove it completely but keep the times and a gap for the next record.
I am creating is a sign in database where staff sign in/out for each day of a week. the issue is when the staff member signs in/out in the morning and then does the same when they get back from lunch it is difficult to read. This report is only printed once a week and will not show after a time frame of 5 days.
So, i still need that name to show up for the next day.
I currently have a report which contains a subform. The master/child fields used to link them are called 'StudentID'.
In the table on which the subform is based, it is possible for multiple records to be associated with a single StudentID: in this case, the subform shows the locations where a student is studying, therefore if a student is based in three different locations the subform will display all three.
This seems to be resulting, when I run the master report, in three identical iterations of the same report being displayed (at least this is the only reason i can see why these duplicates would be displayed; it doesn't happen if a student only has one record in the subform).
Clearly, as a single instance of the report shows all three records in the subform anyway, I don't want to be seeing these duplicates.
I am looking for a way to hide or filter out the records in my reports if all of the values are 0. My problem is that all of my reports have their filters set on the event that opens the report. I use an If statement to decide which report to open, which means that different reports use different fields. This means I can't just add 'AND April_T <> 0' or something to the filter.
View 1 Replies View RelatedI've been struggling with getting a report to simply count records (I don't need any detail other than the counts). Here is what I have:
Table CompressorRoundsT contains these fields (many more actually but these are the ones I care about for this purpose):
Date, Shift, Round
Possible records in the shift field are 1st, 2nd, 3rd and the round field has Rnd 1 and Rnd 2.
For each date, I need to count the number of records per shift and per round. For example, the report should show that on June 7th, 1st shift has 14 records for round 1 and 14 records for round 2. Same for 2nd and 3rd shift. I don't need any other details of what the records contain, just the counts.
I've had some success but the layout ends up too spread out because it is including the individual records instead of just showing the counts and it isn't grouping the way I want.
It's a report for management to see how many readings (rounds) were missed in a period of time.
I have a main form with a subform. The subform has linked tables from the main form. People are on the main form with the index PersonId and they are linked to incidents by IncidentId.
I want to put in two buttons.
First put a print report button for each subform whereby it will only produce a report for the records I can see on screen . i.e. if a person is linked to two incidents I just want the report for those two incidents.
Secondly I would also like a print all button on the subform where it prints reports containing the current IncidentId number.
I am trying to use =DCount() on a report and its half way working, it does count records acording to the criteria I asign the problem is its using the whole universe of records in the table so I have a report displaying 10 records of which 953 are Red and 752 are Blue...
View 14 Replies View Related