I have a table that shows "DONE" and "REMAIN" for each "AREA" like below:
Code:
AREADONEREMAIN TOTAL
AREA1100200300
AREA2200300500
AREA3200700900
Now I like to make a report that shows "DONE" and "REMAIN" in each AREA with pie chart, now I have problem how I have to do this job for the graph, how should be "row source" of chart control. What query needs on this table?
I have show results of scores on a graph but need to show if those scores fall below, in between or above acceptable limits. For example, lets say the acceptable range is between 10.5 and 15.6 but people can scores between 0 and 50. So what I need to do on a report chart/graph is show the actual scores in columns, let access automatically adjust the scale, but have the area between 10.5 and 15.6 on the scale highlighted or coloured or perhaps indicated by two horizontal lines across the chart/graph.
View 5 Replies View RelatedI have created a chart report, but for some reasons, it only shows Sample data (East, West, North, 1st Qtr, 2nd Qtr, 3th Qtr, 4th Qtr etc). It is in Design View. If I do Print Preview, it looks fine.
How to have the Chart properly displayed in Design View?
I have a report with a number of calculated fields, and information that is pulled from the form that calls the report. Pulling the information is done in the Report_Load() event by setting the report.txtBox = Form.txtBox. When I open the report in acPreview all the calculated fields are populated as they should, and when I open the report in acNormal mode (which is what I want) the calculated fields remain blank.
View 6 Replies View RelatedI added a "print preview" button to a report that does just that, shows the print preview. The issue I'm having is that I can't do anything in Access after I click that button. Everything in Access seems to stop working, I can't click on anything with my mouse. the only thing that does anything is that i can move the report up and down with the up/down/left/right keys. If I click on a different application that isn't Access (i.e. excel, spotify, email, etc.) and then go back to it, everything works fine.
View 4 Replies View RelatedI have a query written that has two numbers. One is the trucking fleet size (63) and the other is the average number of trucks used over a time period (in this example, its 52.2)..I just want to create a pie chart that has 52.2/63. so the pie would be roughly 90% filled.
View 2 Replies View RelatedI am working on a project that is requiring me to hide a subreport that happens to be chart graph, when the chart has no data and my problem is that I cannot seem to get the report to properly hide and show the label behind it when the data is not there. I am in need of a SQL code that will read my blank record source as a zero instead of blank. I have tried Nz, IsEmpty, and IsNull and none of them seem to work.Here is the current SQL code:
SELECT DISTINCTROW Sum(Case_review.ID) AS SumOfID
FROM Case_review
WHERE (((Case_review.[Type of Issue].Value)="Clinical"));
Here is the current VBA code (which is in event on load) for the main report:
If Me.Rpt_Clinical.Report.HasData = -1 Then
Me.Label29.Visible = False
Me.Rpt_Clinical.Visible = True
Else
Me.Label29.Visible = True
Me.Rpt_Clinical.Visible = False
linking a report and a subreport (chart). I have uploaded my sample DB. I'm trying to chart all the individuals and three fields for each Home. Both report and subreport are using the same query for the record source. My charts are blank "All_Homes_Individual_Totals". Just use date range 05/01/14, 06/24/14 on my Main form page for the data.
My second question is how would you create a chart to pull by each individual with their monthly totals per Home using "qry_Community_ Inclusion_ All_Homes" with a report and subreport (chart) as above. Report would show the individual's totals by month for each home.
How can I create a chart to be added to the last page of an access report to summarize all the data reported?
View 1 Replies View RelatedI have a popup form that prompts for a value and has a button defined with an OnClick,OpenReport with a WHERE clause. The value the user enters is placed in the WHERE clause.
The report is generated using a Query and the WHERE clause.
I was very surprised -- it works!
Now I'd like to add a chart to the report that represents the information on the report. How can I do this without calling the query again? Can I somehow reference the information that's in the report?
I am having an issue with viewing a report. I have a button set up to show the print preview of the report. There is a chart based on the report's record source, and two sub-reports showing related data. The print preview section however shows the the chart area where it would appear is blank, i.e. there is a white area where the chart should go. There is no error message. The two sub-reports appear correctly. If I go to print the report, however, the chart appears, and it will also appear if I change the view type (e.g. to layout and back again).
View 7 Replies View RelatedI have a bar pivot chart made in a form this load fine, I have the below VBA code in place to control the bar color depending on what the bar show.
Set frms = Forms![OtherCases created by Indv by Month chart].Form.ChartSpace.Charts(0)
Dim i As Long
With frms
For i = 0 To Forms![OtherCases created by Indv by Month chart].Form.ChartSpace.Charts(0).SeriesCollection.Count - 1
With .SeriesCollection(i).Name
Select Case Forms![OtherCases created by Indv by Month
[code].....
When I then open the Report this is not working at all each bar just get a random color regardless what the bar show.how to convert the above to fit a Pivot chart form a form that is displayed on a report.
I have created a database that tracks production by individuals. I have also created a report which includes a pivot chart to give the user a chart view of production.
In the pivot filter of the chart I have associate names, where the user can click all, or individual associates, to see individual production.
The trouble I am having is when the user goes to print the chart, it will only print the chart with the "All" filter view. Even if the pivot chart is filtered to one associate, it will print like "All" was checked.
Is there a way to allow the report/pivot chart to only print the production for the individual who is checked within the pivot filter?
I've got a report, which on the screen is three chrts and a page break in between. Page is set up to print landscape.
When I print the report or save to pdf it adds a lot of pages in between 2 and 3. It seems to be of chart no.2 getting smaller and smaller. I've attached a copy of the pdf so you can see what I mean.
its doing this on all my reports.
I have a query that has a field that reads DateReceived By Month: Format$([Workorders].[DateReceived],'mmmm yyyy') The criteria line is Like "*" & [Enter Month & Year (Leave Blank for all)] & "*" And this works when I run the query. If I enter october 2013 it shows only records for this date range like it should.
Then I built a bar chart report that will show the workorders only for the month entered. The problem is, If I leave this field in my query the chart does not update . When I open the chart it will prompt for the month and year but the data in the bar chart doesnt change. If I remove this field the chart updates as expected.
If I go into design view for the report and then right click on the chart and go to properties , then to row source, it reads as this:
TRANSFORM Sum([Workorders Query2].MyTime) AS SumOfMyTime SELECT [Workorders Query2].SerialNumber FROM [Workorders Query2] GROUP BY [Workorders Query2].SerialNumber PIVOT [Workorders Query2].[MXDPrinter];
If I click on the elipstical to go into query tools for this line , and click on run I get the error : The microsoft Access database engine does not recognize '[Enter Month & Year (Leave Blank for All)]' as a valid field name or expression.
So my criteria runs normally in the query and returns the correct records, but I can't get it to work in the chart .
I am having trouble creating a chart within a report. Let me start off by explaing my report.
I have many unbound textboxes on my report that all have the code very similar to this:
" =Count(IIf([Complaints Table]![Month]=1,IIf([Complaints Table]![Decision - Our Favour? (Y/N)]="Y",0))) "
This basically gives a count of for a specific month. There are twelve rows of text boxes and two columns. There is a query applied to the report to input the year, as this is a yearly report.
What I want to do is link a chart to each and every text box to show the data in an easy to view format. But I can't seem to figure it out, and I've had no luck on the web .
I know how to create a chart in an access report, put it in the group header or footer and link it such that the the grouping filters the chart.
My VP wants me to create a chart that compares each invididual providers episiotomy rate (something that is done to pregnant women during delivery) to the overall divisional rate on a monthly basis.
I know how to do this with 2 charts, ie 2 different group levels. One chart goes in the date grouping level (the overall rate) and another goes in the provider grouping level (the individual provide rate).
is there a way to have this in one graph in an access report?
I've got a simple dataset that will ALWAYS have 4 rows, against which I have assigned the colours Green, Amber, Red, Grey. So I made a simple pie-chart to go on the report, but I can't work out how to assign the same colours.
Please see 3 attachments showing the current layout, the preferred layout (which I mocked up in Excel) and the chart settings screen.
The chart is working OK i.e. 4 slices appear and they are the right size, but when I open the chart, I see only East, West, North. So I am unable to manually set the colour for the 4th slice.
Using a Microsoft Chart Object 6.0 in an Access 2010 report. It's easy enough to do the basics and that chart responds to data.In my case, I have 12 lines, or columns, being controlled by data. It responds to the data. just fine. What I want to do is control the line weight and colour of each line through VBA.
You can click on the chart itself on the report form, but formatting the line you actually want is almost impossible. Pretending we can, you get the pop-up configuration windows and the TAB "PATTERNS". Under that, you can select "LINE" and then choose the style, color and weight. This is what I need to do in VBA.
Lines like this do not work:Graph_Data.Columns("A").Line.Weight = 5
or...
objDataSheet.Columns("A").Line.Weight = 5I tried a variety of versions of that and am pulling my hair out.
I have a totals query that shows results in a chart. It takes a parameter to limit results, by a combobox in a form.
Parameter in the query includes the OR "*" expression, in case someone wants to get the results unfiltered.
The Combobox in the form, has an AfteUpdate event that opens the chart (form) every time its value changes, by the [DoCmd.OpenForm "ChartForm" , acNormal] expression.
I don't know how to make it open the ChartForm when no parameter is selected in the combobox.
I made a report with following crosstab query.
TRANSFORM Workersdetail.workername AS CountOfedate
SELECT Workersdetail.[attendance], Count(Workersdetail.[edate]) AS [Total Of edate]
FROM Workersdetail
GROUP BY Workersdetail.[Workername], Workersdetail.[attendance], Workersdetail.[workerhourenter]
PIVOT site+Cstr([workerhourenter])
I wanted to know that, is there any option through which my report gets autoupdate or refresh incase of addition in SITE field (as mentioned with PIVOT)?
I have a form with a Yes/No checkbox. Sometimes a data entry person will use this, sometimes an associated report is printed and a technician in the field will be required to fill check the box by hand and return the report for data entry. what I have tried to format the check box, if the box isn't already checked, I can't get it to show up clearly on the printed report. It's set to Visible, width 6pt, solid, black, always display, yet it still is barely visible. Ive tried increasing the grid line thicknesses, making it shadowed, nothing seems to work. Is there anything I can do?
View 9 Replies View RelatedI am using mail merge to add info from my database to my word document template. I want to make it the same as my form I have set up which gives me a patient name, dob, GP details as head of main form then a subform (continuous) of their medication. When I try a mail merge it comes up right but only shows one medication on each page. I want it to add all their medications to the body and have the patient info in the heading. Do-able?
View 3 Replies View Relatedi have a database. the database have a table called CardDetails in this table there is like 1000 rows.The table have a field named MedicalId. and i have a folder . it's destination (D:CardPic) . this folder contains 1000 pic has the same names as the medical ids....i need to make a report and show on it these pic's the database doesn't have a afield that contains the path.i need to auto display the images on the report depending on the medical id.
View 10 Replies View RelatedI have a database and one of the functions is to track the purchase of fuel. Part of purchasing fuel is registering what the current odometer reads. My query gets the Vehicle ID, Date of Transaction and Odometer reading. I want to show a report that shows how many miles the vehicle is has traveled for a certain amount of time. If it's for 2013 then I'll put the criteria for 2014 in the date. This will give me a list of all vehicles and their odometer readings. I then sort the date by ascending.
In the report I group on vehicle ID and then I want to show all their transactions and add up how many miles were driven.
Vehicle 1
1/2/201
1/5/2013
1/15/2013
ETC...
Total Miles Driven in 2014: XXXXXX
I have a main report / subreport relation, just want to have a fixed length of each printout. e.g the total number of lines of the subreport should be 8 lines. However, lots of subreports contain records less than 8. I would like to know how to insert of blank line in the subreport depending on the records with content at each print, in order to make the total number of lines in each subreport is 8 each print!!
View 1 Replies View Related