Guys,
I want to write a report. I have 10 different tables now what I want to do is. Create a report from say 6 out of these 10 tables. These 10 tables have some common columns and some different. If a table doesnt have a particular column, it can be blank in the report. But say "title" is common to all tables, so it should pick up this "title" from each table. How can I do this???
Adwait
I am trying to produce a report that shows a single record that has fields in multiple tables. When these reports we're in Word form they were about 7 pages long. I put them in access to be able to update the data in one or more than one of them at a time more effectively. But now I am unable to get them print out one at a time like they looked originally in Word form.
I have been trying to create a report to count equipment tested between two dates:
I am using Access 2000 (old I know) and I have 21 different tables with the fields laid out the same. For the moment, I will list five of the tables: Servers, Laptops, Printers, Workstations, and Monitors. The criteria I draw from each table are the fields Model#, Part#, Serial#, Test Date, Retest Date, and Technician.
I can create a report from a query (say laptops). The criteria I is BETWEEN[Enter Start Date]AND[Enter End Date] under the TEST DATE field. Works great! In my report I use =Count(*)&" "&"Unit(s) tested" & "Between "&[Enter Start Date] & " and" & [Enter End Date].
That works great too.
I am trying to create ONE REPORT using ONE Date range and display how many units were tested:
Example:
Units Tested between March 1, 2014 and March 31, 2014
If I can get these five tables, hopefully I can add additional tables to the same report as I need them. I am not savy with VB code, but will give it a go with some direction as to where to put it and how to add to it.
I have a form (form1) that will populate with records (table1) based on key fields of "Project Number" and at time-points we will update part of the record, and then we create a word document detailing the updates with a couple of other bits of information not in original record.
Basically I want it to go from the original form (form1) into another form (form2) (via a command button) taking the key field of "Project Number" where it will ask the bits of information that we don't need have already and the contact person.
I have got this to store in a different table (table2) using a key field of just "ID" from the original records (table1). A list of contact people are in a separate table (table3) using a key field of "contact name" which will include other details for them such as address and phone number.
So from "form2" I would like to produce a report that contains information form "table1" based on the "Project Number" and "table2" based on "ID" as just been generated and "table 3" which is based on "contact name".
So I want to pull information form the records based on the certain key fields but struggling for it to pull it successfully...
Got relationships between: "contact name" fields in both "table2" and "table3" "project number" fields in both "table1" and table2"
In a query for the report I have all the appropriate fields, but only have the "contact name" and "project number" from "table2" is this right? or do I need both in?
Or would it be easier to draw all this information into "form2" but don't really want to select that many drop down boxes or would it be able to pull it from the "contact name" and "project number" boxes????
My report produces multiple copies of the same record. I know why, but don't know how to fix it.
EmployeeTable.
With a one to many relationship with TrainingTable (via employee PK as FK in trainingtable).
Training table has a one to many relationship with a table called Range.
Report is based on a query that picks up the Employee/Training/Range (range just describes the training unit).
However, If I have more than one range expressed organized a training unit, the report spits out several copies of the Employee record to display all the ranges.
I have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.
1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)
2. If user presses the Print button before pressing Save button then system should prompt user.
Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):
Private bSaveClicked As Boolean Private Sub Form_BeforeUpdate(Cancel As Integer) If Not bSaveClicked Then MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation Cancel = True
I have a form that the user can add Work Order numbers to a text box and pass them to a listbox to collect 1 or more values. Each of which need a separate report with the labour hours for each Work Order.
I am having issues figuring out how to get it to pass them to a query or filter the reports.
I have tried many different examples and nothing seems to work.
I am trying to pass a date range parameter & an additional parameter (Type of Audit) to 6 subreports based off individual crosstab queries and housed on one Unbound Report ("rptFinal").I have an Unbound Form "frmDate" passing a date range and Type of Audit using [Start Date] and [End Date] to rptFinal with a button that simply opens the rptFinal as follows:
In each Crosstab query, I have set the parameter criteria (in both the Parameter section & the query itself) to:
[Forms]![FrmDate]![Start Date] And [Forms]![FrmDate]![End Date] and also, [Forms]![FrmDate]![Enter Type of Audit]
On each subreports On Load Event, I have added:
Private Sub Report_Load() Me.Filter = "[DteAuditDate] BETWEEN #" & Forms!frmDate![Start Date] & "# AND #" & Forms!frmDate![End Date] & "#" Me.Filter = "[Type of Audit] = #" & Forms!frmDate![Enter Type of Audit] & "#" End Sub
and I've set the Filter On Load property to: Yes..I can open frmDate, fill in the date and Type of Audit, launch the report and it runs with no error, I have 6 blank subreports in report Preview. The headers are showing up but none of the data.
I have created a report which contains within it multiple sub-reports, which I use to generate a document for management meetings on a bi-weekly basis.
For each of these I have the subreports filtered to a unique number for consideration that period e.g. LIKE "88/00039" which relates to my data.
In order to change this I have to manually update each of the filter commands within the subreports but I assume there must be an easier 'catch-all' method of achieving this?
Ideally I'd be looking for a command prompt so I could enter just the number sequence e.g. "88/00040" and then enter this (via a corresponding macro or similar) to update the filter commands.
I have four forms named [Information Form], [Evidence Form], [Subject Form], and [Vehicle Form]. The Final Form is a Tabbed Form named [New Incident]. The tabbed form has four tabs, with each tab displaying one of the forms above. I also have a Print Command Button named [Print All] underneath the tabbed portion of the [New Incident] form.
Also, All of the four forms are set to data entry - yes, so that on open they will be clean and read for new record entry. I need the [Print All] button to do, just that, print everything that has or has not just been entered into the four forms, even if some are printed blank because they were not necessary for this particular report. One thin of note is that each form on the tab has a field for the "Incident Number" which will be the same for all four forms.
I am trying to add to a db I inherited. One of the end reports that is produced is a cost breakdown for each end user.As things stand, the data collates into individual reports which are then grouped into one file and saved via PDF. What I am trying to work out is whether or not I can selectively pick some of those reports to have more than one copy.
I see a form (within an existing form) that will list all of the end users for a particular scheme and, next to that, be a dropdown that will allow the db user to select how many copies of each report needs to be published. These will then collate merrily into one document to be saved to PDF.
I have a queries that do all the calculations and dumps the output to Query X for all different types of customers. At the moment I am required to generate a report for each of the customers and send it to them, manually.
End Goal:Initiate a Macro (at a given time at a given frequency) that would run a process to generate different reports for all different types of customers using a standard report template. I am also trying to avoid having to create a report for each customer (as the customer base grows, the report count will grow) so looking at something that would look into Query X and generate # of reports depending on number of customers.
Every month, I create 15 individual reports with each report filtered by two fields, let's say Dept and Exec. You change Dept and Exec via a combo box drop down based on a table, and this information is passed to the query behind the report. Now, I repeat this process for every report. I use an unbound form that gathers the "Title", which is the Dept Name +"Special Report"; report Date using "as of" [DATE], and an updated through [Second Date].
Each monthly set of reports is sent to a new directory and folder (i.e. M:MOR Reports2005January. This changes each month. Somehow, I'd like to automate this where each report prints with its name to a newly created folder in pdf format.
I have been reading prior posts and am coming up with some ideas like adding a "selected" field to the Dept/Exec table and then step through those selected records to determine which report you are running. It takes a long time to print these to pdf in a new directory every month.
I wanted to print multiple reports using for loop but I am not sure how to start with.
This is basically my idea:
1. Create a hidden indicator, I name it txtHidden. 2. I have one table, there are one column for "report name". 3. I have one query, filtered the "report name" column according to txtHidden, criteria written in the design view. 4. Using For loop, browse through all the existing report. 5. Every loop, txtHidden will equals to every reportItem.Name. Query will run. 6. If Query is no result, dont open report, if query returns some result, open the report.
I wanted to code something as below, but I dont know what to put in the [Dont know what to type] field...
For Each [Dont know what to type] In Access.Reports [Forms]![frmStartup]![txtHidden] =[ Dont know what to type] .Name If DCount("*", "ReportQuery", "") > 0 Then DoCmd.OpenReport [Forms]![frmStartup]![txtHidden], acViewPreview End If Next
In my tables i have used calculated fields. one of the fields is to "total expenses." In a report, i need to show the sum of all the "total expenses", the filed populates in the report but the cents are missing. for example if the amount is 6080.40 it shows as 6080. how can i get around this? I have tried changing the decimal point value to 2 at which point the value turns to 6080.00 when it should be 6080.40 (i am a beginner at this i am assuming the answer will probably involve c++ or visual basic's, two concepts i am not familiar with.)
I have a database of high-school football players, and I am looking to print out single page reports (or forms) that will show detail from several tables and queries. This will act as their resume when they visit schools on recruiting visits. The reason for needing query items, is that I have developed queries that return the most up to date height, weight, 40 time etc., and that single most up to date number is what should print, not the entire table. When I try to build a report it will let me bring in multiple tables, but not queries.
Using one form with multiple combo boxes on the basis of which am trying to generate a report. Below is the code I've put in a command button (in Form) by which I want to generate a report....FYI - both combo boxes have text value...
how to print mutiple "invoice-records"..I want to print multiple times the same report but with different values ex. invoices (based on a query). I have the report and the queries ready but how can I automate this task?
I made a database that in one of the forms, I like by clicking on a button the user be able to select 5 excel files with different file names (in the same directory) and then based on the imported file's names, it be stored in 5 different tables.
At the moment by using the bellow code, I can import multiple files (with the same formats) only into one table . My vba code comes as follow:
Function GetAllFiles() Dim fd As Object Dim strFilter As String Dim lngItems As Long
Const msoFileDialogOpen As Long = 3 Const msoFileDialogViewDetails As Long = 2
I need to count records based on multiple criteria from two different tables. I have two tables (i.e. "tblTasks" and "tblTaskHistory"). The tables have a one-to-many relationship based on the "TaskID" field. "tblTasks" has a field called "AssignedTo" and "tblTaskHistory" has a field called "TaskStatus". I need to know how many tasks have been "reopened", the "reopened" status is located in the "TaskStatus" field in "tblTaskHistory". I need this count against a unique listing of employees which can be found in the "AssignedTo" field in "tblTasks".
I would like to know which way is the best way to import excel data from multiple sheets in to multiple tables in access.
For example data from Sheet1 -> Table1, Sheet2->Table2, Sheet3->Table3 etc...
I have tried using this: Cmd.TransferSpreadsheet acImport, acSpreadsheetTypeExcel5, "Table1", "C:Importedfile.xlsx", True, "Sheet1!"
Ironically, data from Sheet2 and Sheet3 seem to be properly imported in to table2 and table3, but some of the data from Sheet1 seems to be missing in Table1 after import.
A small issue I was wondering of for a few day . Is it possible in SQL query to SELECT multiple fields from multiple tables ? Example for the question is
Code:
dim my_var as String my_var = "SELECT Emp_FName , Emp_LName , Emp_Adress " _ & " FROM Table1 " _ & " AND Emp_Date_Of_Payment , Emp_Sum_Of_Payment " _ & "FROM Table2 " _ & " WHERE Emp_ID = 3 "
Is this code actually valid in SQL gramatics , and is it usable if passed to a Recordset variable ( rs = CurrentDB.OpenRecordset(my_var) ) ? Just FYI - The two tables are not related and I want to keep them that way (If possible relate their records just via SQL/Vba )