I created a report to show stock level and transactions. there are date, transaction, quantity and balance fields. the balance field show the total balance of the item at the moment. what I need is to show the balance at the transaction date.
View Replies
I am trying to create a suitable expression, either on the form itself or in the underlying query, that calculate the balance after each transaction, like a bank statement. What is the best way to do it?
Paul
I did using below:
One table with Student Basic Records with Course name and Total Fee
Tabel name Student_Rec and Fields are below
ID, StudentName, Course Name, RollNo, Total Fee
then another table name Fee_Details for receiving dues in installments.
ID, RollNo, FeeDue, FeePaid, Comments
Now i want the FeeDue Field should show the Balance feedue of each student
I mean it automatically check total fee due from student_Rec table and also check all previous entries for the same rollnumber in Fee_details Table and show the pending amount as FeeDue.
I have created 3 tables for simple inventory.
a) Item details
b) stock in
c) stock out
All I simply want to do is create a new table by item id to show balance of stock.
I want to perform in this query that Opening balance + Dr - Cr = Closing balance.And the next day my opening balance will equal to the date() -1 closing balance. And when todays movement DR and CR take changes it will also take affect on closing balance.Here I have two questions 1st is how can I built a qry that will make todays opening equal to last day closing . Can I have to built two queries or make another table that store last day closing then create relationship and again built a query that perform.
View 14 Replies View RelatedI want to create a simple data base, in which I have to record Payments received from each customer on daily basis. and on daily basis i want to generate a report for the transaction I have made. example of data table is as follow. payment mode is cash or bank transfer.how to generate reports for day to day transaction.
View 5 Replies View RelatedI'm setting up a query which will eventually run as a report to show sales within a specific date period and so on.
In my table "tblJobs" I have a field named "JobInputDate" - this will act as my date source, everything else included within the query works fine, i.e. costs etc, etc.
The format of the date field is Short Date and the default value is the date the entry was made to the table, this obviously uses the =Date() expressing to generate the date.
Now, when I come to building my query I want the dates to be shown as a day of the week, so that when I eventually build my report, I can group them by day.
I've looked through the various threads on here which all point to using the Format([YourDateField],"dddd") format. However when I run the query I get the "Data mismatch" error.
I have a report, based on a query, where the field name is "Date of Work". The criteria in this query field is >=[Start Date] And <=[End Date], which works fine. However I need to have the start and end dates to show in the resulting report header based on the query.
View 1 Replies View RelatedI want a very basic report that shows:* all field reps (sales people),
* their quota in terms of new customer registrations
* their actual new customer registrations for a particular month
The report should include field reps with 0 sales. The query I've created works fine as long as there's no date filter. But adding <1/1/2013 removed all field reps with 0 sales. I want to make sure the filter concept was working before getting into date ranges.
Code:
SELECT DISTINCTROW tbl_ksFieldRep.salesRepName, tbl_ksFieldRep.quota, Count(tbl_customers.dateRegistration) AS NewRegistrations
FROM tbl_ksFieldRep LEFT JOIN tbl_customers ON tbl_ksFieldRep.[salesRepName] = tbl_customers.[ksFieldRep]
WHERE (((tbl_customers.dateRegistration)<#1/1/2013#))
GROUP BY tbl_ksFieldRep.salesRepName, tbl_ksFieldRep.quota;
i'm trying to create a query of all employees doesn't have any transaction for a certain range of date and will also shows the last transaction date they have.i have two databases one is the transaction file and the other is the user file.
View 7 Replies View RelatedI have an attendance database and I connect the time attendance machine db to my access db, what i am trying to do is to generate a report that shows the time in and time out for specific date. the type of attendance db is date/time.
Please see the attached screenshot db from attendance machine.
an also some time there is duplicate entry, I need to get the first and the last entry only for specific date.
I have a database of high-school football players, and I am looking to print out single page reports (or forms) that will show detail from several tables and queries. This will act as their resume when they visit schools on recruiting visits. The reason for needing query items, is that I have developed queries that return the most up to date height, weight, 40 time etc., and that single most up to date number is what should print, not the entire table. When I try to build a report it will let me bring in multiple tables, but not queries.
View 2 Replies View RelatedI have tab controls, each of which holds a report. If the report is longer than the tab control the report is stuck there. no slide bars, no overflow. I have set scroll bars but they dont seem to take or work. I need to find a way to add verticle scroll bars to the reports within the tab controls so that you can view the entire report. I have included a screen print of what I mean.
View 1 Replies View RelatedI'm trying to create a report where I can use a section header as a hyperlink to show/hide detail, but only for that section. For example, my customer names are:
Code:
ABC Co.
ZYX Co.
123 Co.
If I click on ZYX Co., I want it to show the contracts for ONLY that customer:
Code:
ABC Co.
ZYX Co.
Contract 1
Contract 2
123 Co.
Right now, my code looks like this for On_Click:
Code:
If Me.Detail.Visible = False Then
Me.Detail.Visible = True
Else
Me.Detail.Visible = False
End If
But it shows and hides detail for ALL customers when I do this. Is there a way to only show/hide for the customer on which I click?
I am using Access 2007 and I have had a curious issue arise.
I like to use the Date Picker feature on all my forms to make it easier to enter dates. I have set up each table's date field property to "show date picker for dates", as per attached (.jpg)
When I use that particular field in a form, I also set up the field to allow for the Date Picker option (date picker form property sheet.jpg)
The curious part is that not every form that I set up actually shows the date picker when I select the date field. Some forms it works perfectly, others it doesn't.
I have a form and on a button click, a report pops up.I want to see only the report but not the access window.i could do it for forms but not to report.
"DoCmd.OpenReport stDocName, acViewPreview, acDialog"
"fSetAccessWindow (SW_SHOWNORMAL)"
I am trying to pass a date range parameter & an additional parameter (Type of Audit) to 6 subreports based off individual crosstab queries and housed on one Unbound Report ("rptFinal").I have an Unbound Form "frmDate" passing a date range and Type of Audit using [Start Date] and [End Date] to rptFinal with a button that simply opens the rptFinal as follows:
stDocName = "rptFinal"
DoCmd.OpenReport stDocName, acViewReport
In each Crosstab query, I have set the parameter criteria (in both the Parameter section & the query itself) to:
[Forms]![FrmDate]![Start Date] And [Forms]![FrmDate]![End Date]
and also,
[Forms]![FrmDate]![Enter Type of Audit]
On each subreports On Load Event, I have added:
Private Sub Report_Load()
Me.Filter = "[DteAuditDate] BETWEEN #" & Forms!frmDate![Start Date] & "# AND #" & Forms!frmDate![End Date] & "#"
Me.Filter = "[Type of Audit] = #" & Forms!frmDate![Enter Type of Audit] & "#"
End Sub
and I've set the Filter On Load property to: Yes..I can open frmDate, fill in the date and Type of Audit, launch the report and it runs with no error, I have 6 blank subreports in report Preview. The headers are showing up but none of the data.
ACCESS 2010, I have a from and to date in a query. How do I get these two dates to show in the report header ?
View 1 Replies View RelatedI'm currently working on a report to show the differences between two records (in this case, Documents). Each Document contains a number of paragraphs which are separate objects within my database. The purpose of this is to narrow down which paragraphs require reading (i.e. remove/highlight which are duplicates).
I've set up the report to show only the paragraphs from two selected documents (I don't think there is need for more than two, but how to select two or more documents for the query), and currently I have set the 'Hide duplicates' which kind of works but not the result I was hoping for - it only hides the related field and leaves the original in tact.
I am looking for a method that hides both duplicate records (not just the duplicated fields) if possible, failing that a method that will conditionally format the remaining duplicate or all duplicates.
Looks like the Hide Duplicates hasn't quite worked either - I have two fields which are clearly different and it has hidden the longer one. Likewise another later paragraph is not duplicated and it has hidden another which isn't duplicated. If it makes any difference the field is of type 'Memo'
I have a main report with several subreports. Some subreports have other nested subreports. all of the reports and subreports are based on queries. when a query returns no values, i would still like for the reports and subreports to display in print preview. (currently, they display in report view but not in print preview.)
I tried a few things:
1) I set all report section can shrink options to "No" - (this did not work)
2) I set the can shrink options for all textbox controls, within each report section , to "No" - (this did not work)
3) I moved all controls from the details section of the subreport to the report header section - (when I did this, I got the subreport to show in print preview when the query for a single subreport returns no values but when i have a subreport with nested subreports that have no value, none of them show up in print preview)
I've searched...moving the controls from the details to the report header was the best thing i could find, but again, this only works with a single subreport and not with multiple nested subreports.
I have attached a sample spreadsheet. Each store has a planned date which is calculated off the dates in column b and c. The second row is actual date.
As much of the data I have is in MS Access, I tried to use some extracts to appear in this format but no luck.
I want the report not to show data with zero balances.
Example: if my report has 10 line items and 3 of these line items have 0 balances, then the report should only show the 7 items that do not have 0 balances. (the report should use up 7 lines / rows only.)
See the attached report for a better understanding...
I want to run 10 big queries (append/update/delete) one after another.
If error happens before they all finish (if user press escape button) - I want
to discard all record changes made by any of those queryes. I suppose
begin/end transaction method is the right way to do that. Can you give
me an example of code?
I'm not sure what to search for to figure this one out. My searches, so far, haven't helped me much.
I'm tracking transactions in a clinic. The amount due for the visit is calculated fine, but sometimes people don't pay right away. (And sometimes pay ahead, which will just be a negative amount due.) I need my transaction to not only show what's due from today's visit, but also to look at previous transactions of the same client and calculate what may still be due from before. Additionally, if I pull up an OLD record, I need it to show what WAS due on that date, not what's due today.
So, I know I need to refer to dates prior to the date on the form, regardless whether it's today's date (for a new visit) or a previous date (for a previous visit). That's what I'm confused about.
How do I refer to [txtDate] on THIS form and not confuse Access with [txtDate] on earlier forms?
Code like this:
SUM[blahblahblah] WHERE [txtDate] < [txtDate] surely won't work.
Does:
SUM[blahblahblah] WHERE [txtDate] < [Me].[txtDate] work?
Should this kind of calculation be in a query or in the Control Source itself, or somewhere else?
And do I need the square brackets or not?
Do I use '.' or '!'?
I have a question about reports in Access. Is there a way for report fields to be omitted from the report if the database value is null?
For example:
Name: Joe
Last Name: Smith
Company: (Is Null)
website: something.com
would become.....
Name: Joe
Last Name: Smith
Website: something.com
thanks!
I am very new to access. I have made a database that holds certain company information.
As part of a process a company must fill in and complete form and send to me and once they have I enter a 'yes' to the form and then link directly to said form.
I am wanting to be able to run a report to be able to only see the companies where a certain field has not been filled in.
For example I have a field for doc 698, if I have had this form back I enter a yes in this field, if I havent had this back I leave it blank and these blanks are what I want to pull off in the report.
I have made queries and then just filtered to show blanks but I would like to have in report form.