I was able to create only 3 pages in access report. I am not able to go beyond 3 pages since the page footer is not moving down, means I am not able to drag it down.
It is a simple report of resume with only text boxes. My report comes around 10 pages.
I am trying to create a report that has a header ( all ok ) then could have 1 or 15 detail lines ( all ok ) which contain cost for each line
then I have a footer with the subtotals of the costs and also bank details
then I have footnotes
What I need the report to do is keep the subtotals, bank details and the footer notes at the bottom of the page all the time weather I have one detail line or 15 detail lines
What is happening at this time is the footer information is moving up or down depending on the number of lines I have.
I am trying to create an invoice report. I want to add all the costs from the detail section in my footer. I have accomplished this in either the Report footer and/or the page footer, but the problem is that the report footer doesn't go to the bottom of the page, and the page footer doesn't go to just the last page. I have tested a bunch of suggestions that don't seem to work.
1. Print page footer with Report header = NO - only works if your report is two pages or more.
2. Private Sub PageFooterSection_Format(Cancel As Integer, FormatCount As Integer)
If Page = Pages Then
Me.[TextBoxName].Visible = True
Else
Me.[TextBoxName].Visible = False
End If
End Sub
The Page functions worked, but it did not change the results from page to page. If it was a two page report, then the if statement is false and the text box was not visible on page 1, but it also was not visible on page 2.
I've used the following code on the footer on print procedure:
Private Sub PageFooterSection_Print(Cancel As Integer, PrintCount As Integer)
Me.PageFooterSection.Visible = (Me.[Page] = 1)
End Sub
This works fine when you view it in print preview, but the footer don't show up at all when you actually print it.The reports default view itself is set print preview.
I have a 14 page report in which I want the footer to appear only on the first page. I accomplish this with some code in the OnFormat event of the page footer:
If Page > 1 Then
Me.PageFooter2.Visible = False
Else
Me.PageFooter2.Visible = True
End If
The first page has the footer (great).
The 3rd thru the 14th page does not (great).
The 2nd page also doesn't have the footer - but - it only shows a half page of data! The data continues where it left off on the third page!
So, to sum up:
1st Page: Footer with detail section containing 16 rows of data.
3rd thru 14th Page: No footer section with 28 rows of data.
2nd Page: No footer with only 16 rows of data.
I am struggling with building and If Then statement in my Report Footer. I have a report that pulls data from two tables...Students and Homeroom. This gives me a list of the students in each homeroom class and they are separated by homeroom. I would like to use a function in the page footer that counts the number of students who are members of our PTSA organization and then returns a percentage based on the total number of students in each homeroom class.
In the Report, I have on each page:
Page Header: Homeroom, LastName, FirstName, FamilyID
Details: LastName, FirstName, FamilyID
What I need is for the function to look at the FamilyID field and determine is there is any value entered. Then I need a count the total number of records in that homeroom and the total number of records with a value, so I can then get a percent of how many students actually belong to the PTSA in each homeroom.
Is there away to have the report footer only to display on the first page?
View 4 Replies View RelatedHow do I stop the report footer from printing on a separate page. I have seen several suggestions but nothing seems to work.
View 1 Replies View RelatedSend only one or two pages of a multi-page report. I have a report that has three pages. I only want to send the first two as a pdf file. Can this be done with VBA? I know it can be done using Exporting Data on the External Data ribbon, but how can I do it via VBA?
View 4 Replies View RelatedI've created a report based on a query that shows me the jobs that have been added to tblJobs between two selected dates.
The report works fine and displays all the information I need, however other than being sorted by day of the week i.e. Monday, Tuesday, Wednesday etc. The records just run on one after another.
I want to create a page break, so that a full week is shown on a single page before then forcing a new page when it moves in to the next week.
I have a report that is several pages long, the page footer I want to show only on the last page, how can I work out a counter/indicator to know which is the last page and be able to set the footer fields to visible
Jabez
Using MS Access 2013, part of Office 365, I am trying to construct a report that has a different first page footer than the rest of the document. Googling for answers has produced a few options, but none that seem to work. I have virtually no VBA knowledge. I was hoping that there might be some code that I could place in a label in the footer and have it work.
View 1 Replies View RelatedI have seen large projects in which there are clearly several printed database reports printed out to make one booklet.
1. How does one get page numbers for multiple reports to go in sequence instead of starting over again at 1 for each report.
2. How can you add a page reference in one report to something in another report?
Do you have to do these things by hand or is there a way to create a something with auto numbering capabilities? Do you do it by importing the reports to MS Word and creating a master document?
The title of this thread was hard to nail!!
I have a 2 paged Form. frmCustomer (page1) and frmCustomerOrderHistorySub1 and frmCustomerOrderHistorySub2 (Page 2)
On customers form I have a command 'Customer Orders'. When clicked focus is set to 'Page 2'. Page 2 should (and does) display ALL orders placed by the Customer currently being viewed on Page 1.
Problem: frmCustomerOrderHistorySub2 ONLY displays the details for the first order?
If you select the second order then the order details do not update?
I hope the attcahed DB will explain all?
I have spent a good few hours on this. Happy I got most of it to work unaided, could do with a nudge on this final issue.
Thanks for any help in advance.
Phil.
I am trying to produce statistics reports in my database. The user selects the information they require in a form (date from, date to etc). A query then produces the results listing each job in turn which is what I want however at the end I would like to produce sub-totals for each client.
Depending on the criteria selected by the user, only some clients will appear in the list. Ideally I would like the footer to show something like:
Client 1 - 4 jobs
Client 2 - 1 job
Client 5 - 6 jobs
Client 6 - 17 jobs
I have tried using the field:
Code:
=Count([ClientDetailsName])
However this only gives the total number of jobs.
I have a Form named Clients with a multi-page tab named TabCtl0.
The record source tables - primary key is [ID] , TabCtl0 has 7 tabs, the 1st named General.
The 1st 6 tabs show information from the same record.
The 7th tab contains a subform named Focus displaying continuous forms with 3 fields in each record including [ID].
What I am trying (for hours and hours without success) to do is to create a Macro that fires when I double click on a control within subform Focus that takes me to the page named General and selects the record where ID = the ID within the selected record of subform focus.
I have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.
View 3 Replies View RelatedBefore anybody says anything about it, no, my MS Access is not corrupt, and I don't need to reinstall, or update or anything like that.
Now, to the problem...... I have a union query that in essence ties 4 tables together. The query works great! Here's the issue...... When I try to create a data access page using the wizard, I get an error msg saying wizard was unable to create data access page. If I try to create in design view, I cannot view the fields of my union query to add to the data page.
I am including 2 databases..... the first one, called "union" contains the union query that will not work to create a data access page..... the second one, which is very similiar on the union query, just not as detailed does work. It is called "joined"
The only difference in these two union queries, is that I tried to include times for db"union", whereas for db"joined", I only calculated hours. I can make a data access page using the union query in db"joined", but not the union query in db"union"
Any ideas?
If I have a report and it has controls (labels representing column titles) in the page header. Now when I print the report - if it happens that the last page has no detail records - but there is text boxes and so forth in the report footer. Is there a way to not display the page header on the last page?
I have a report where the last page shows the page header - and the field/column labels on the page header - but for which there is no detail records left to display - on the last page. There is report footer information that should display. It just looks weird because the field/column labels show at the top of the page - but there is no data remaining to print under them on that last page.
I want to create a main menu page for my database. I have tried the Navigation form and obviously I am doing something wrong....because the tabs won't open the forms. We have Access 2010 at work and I would like to create something similar to this:
Cardinal Rap - Main Menu
[button] Input Monthly data
This button would take me to another screen that would list the tables for appropriation, expenditures and revenue, each with their own respective button
[button] Reports
This button would take me to another screen that would would list the reports available each with their own respective button
[button] Monthly reconciliations
This button would take me to another screen that would list the tables necessary for my monthly reconciliations each with their own respective button that open that table.
The tabs in the Navigation form don't seem to do anything.
I have a report that should only show 1 page yet I have 2 and one is blank . I cannot find out why?
View 3 Replies View RelatedI have made a report on my query. The page setup is all around merging 0.2" and page size A4
When i view this report in preview it looks all my data whatever i want in a page but after every page it will generate a blank page.
I have included my report.
I have a field on a report with this as its control source...
-------------------
=(Format(Int([quantity]*(DLookUp("[Plot_times]","[ProductList]","[Code] = Reports![Mask_order_book]![CUST_REF]"))/60),"0") & ":" & Format([quantity]*(DLookUp("[Plot_times]","[ProductList]","[Code] = Reports![Mask_order_book]![CUST_REF]")) Mod 60,"00"))
----------------------
It turns a number like this "120" into elapsed time in hours and minutes like this "2:00"
I have a report with an elapsed time for all of the items. I simply want to SUM it at the report footer, but i guess my control source turns it from a number into text, which then cannot be summed ?
I current have three different reports that are the same except for the footers. That means that each time I have a change to the report, I have to remember to make the change on all three copies. Is there a way to add (1) some custom text such as "Client Copy", "Please Sign and Return", "Our Copy" plus one or two data fields from the report query in the page footer (the data fields would be different for each copy)?Basically, what I would like to do is have just one report, but print three copies of it, with each of the three copies having different footers as described above. Is this possible?
View 14 Replies View RelatedI have a report that has a group within a group. The interior group has a footer with a textbox calculating an average. I would like the Outer group to then SUM the averages. I tried doing a =sum([TextBoxWithTheGroup Average]), but access prompts me for the value of this box when I run the report.
To summarize: is there a way to sum a textbox within the footer of a grouping
I have a form with attached subform from which I can choose which records to send to a report. All records in the base table have a comment text field for the user to enter additional data (comments). Typically, there are none, but when there is, if it is only a single record sent to the report, the comment is printed in the page footer. However, if there are multiple records being sent to the report and only one record has text in the comment field, unless it's the last record it the subform, it will not print in the report. There isn't enough room in the detail section to include the comment field (like I said, it's typically not used and when it is, they can be lengthy). Is there a way to get the comment field to print in the report page footer when it is not either the only record selected, or the last record?
View 4 Replies View Related