What line of code do I need to requery a listbox on Form1 when I close Form2?
I'm pretty sure I need to put it in the OnClose Event of Form2, but I don't know how to reference the Listbox on Form1.
Thanks
ScrmingWhisprs
Hi all,
(Refer to Figure1 pls) How can i bring the value from form1 to form2 after i click the save button?
Regard,
alex
I have 2 forms which are based on separate tables. When I open Form2 from a command button on Form1, I would like the common boxes on the Form2 (name, ID #, ets.) to automatically copy the info from the boxes on Form1 with the same names. How can I do this? TIA
View 5 Replies View RelatedHi,
I've searched but cant find the answer,
I have an Account form (Form1) and it displays account information along with their many addresses for the account (in a datagrid embedded form). I hit "update or add address" button to launch form2 (Address Form). From this point I want to query the Address and AddressAccountLink table with a passed in Global Variable (AccountID) from Form 1 so that just the Addresses pertaining to that Account show up, instead of all the Addresses for all accounts.
How do I do this? I've tried a String Query in the Private Sub Form_Load() but it gives me errors, here that is:
sSQLQueryAddr = "SELECT tblLinkAccAdd.AccountID, tblLinkAccAdd.AddressID, tblAddress.* FROM tblAddress INNER JOIN tblLinkAccAdd ON tblAddress.AddressID = tblLinkAccAdd.AddressID WHERE (((tblLinkAccAdd.AccountID)=" & v_accountid & "))" (it's on one line in the code)
followed by:
DoCmd.SetWarnings False
DoCmd.RunSQL sSQLQueryAddr
DoCmd.SetWarnings True
Any ideas? Am I on the right track? Do I move this query elsewhere? The address form is made from a query -- querying the Address and address/account link table.
Oh, the v_accountid does have the correct value passed to it...
Please help , I'm going nuts here!! :confused:
Mike
I have a form where a different form opens up when a user clicks a certain button. What I’m trying to do is assign a field value from form1's subform to a field on form2 and it’s telling me "Run-time error ‘-2147352567 (80020009)’, You can’t assign a value to this object." I'm new to VBA, but think I'm on the right track. Could someone please tell me what I’m doing wrong.
The code I'm using is: Me.txtStoreNo = [Forms]![frmCDRData4REF]![sfrmCDRData4REF].Form!txtStoreNo
I need to make a query work so that when someone enters info into a master form, it will pull the data for that job onto other forms when the job # is entered. Thanks for any help.
View 1 Replies View RelatedI am trying to get the Primary Key value from one form to auto-populate the foreign key value of a second form
I have tried the following code in both the second form's Load Event and the Foreign Key Control Got Focus Event but nothing doing...
Me.[NHS Number] = Forms![frm_Patient_Data_Entry]![NHS Number]
I am new to VBA so not sure of the referencing technique but have looked at the MVPS Form 'referencing' sheet to no avail.
I keep getting an error message (2450) MS Access cannot find the referenced form "frm_Patient_Data_Entry"
I have checked spelling throughout countless times so there must be something wrong with my referencing I guess.
I have a database of books. I have a combobox listing 3 different status W M R.
W is for Whats next to read, M is for more books too read and R for books read or reading now. I can enter a new book by calling up the add a book form from any of those 3 forms.
If I forget to enter a letter in the combo box then the book is lost to those 3 forms as what they see depends on that status letter and I have to go to the table and enter a letter from there.
I want to know if I can auto populate the field (W M R) depending on which form opened the add a book form.
I have 2 form, form1 and form 2 (picture attached)
In Form 1
(main form) there are "reference" field with key pressed event
then call form 2 (list of reference that user can choose)
In form 2
the problem is, when "enter" key pressed (keypress event), selection will move to next record
so the data that transferred to form 1 is wrong (next record)
The question is : how to save current record in form 2 before enter and send the data to form 1
I have a Lost/Found property database which we use to keep record of the lost/found property and its working fine.
The database has one table and two forms.
One form (LostFoundForm) is visible to the user in which they enter data, this form has two sections; Item(s) & Finder's details and the second section is about Restoring details.
However the second form (ClaimReceiptForm) is hidden to the users (for manual data entry) and has only one section which is exactly the same as the first form's first section, i.e., Item(s) & Finder's details. This second form takes the data automatically from the first form because the table behind them is same and fields are same (please see attachment). Up to here it's all working fine.
I would like to introduce a Checkbox or a CommandButton in the LostFoundForm which when we click should pull up a msgbox asking "Do you want to print the receipt for this item(s)?" with a Yes/No option. On clicking "No" it should, obviously, settle down but on clicking "Yes" it should print the "corresponding record" from the ClaimReceiptForm.
Hi all - first post for me, a long-time user of the site though!
I have a form (frmEnquiryFor) where so far everything works almost as I want it! I have a text box (txtCompanyName) and below it a list box (lstCustomer). What I want to happen is that as a user types into the textbox, the listbox below updates on each keystroke. At the moment, this doesn't quite happen: what happens currently is that if the user types into the listbox and then hits return, the listbox updates as it should.
The listbox's rowsource is based on the SQL statement:
"SELECT [qryCustomerLookup].[CustomerName], [qryCustomerLookup].[CustomerCode] FROM qryCustomerLookup; "
The query underlying this, qryCustomerLookup, works as it should. What it does is if the user has typed in nothing, it returns all the Customer names and customer codes. If the user types in "a", it returns all the customer names and codes of customers beginning with "a". If the user types in "ab", it returns them all from customers beginning with "ab". (In case you need it, the SQL for this query is as follows:
"SELECT tblCustomers.CustomerName, tblCustomers.CustomerCode
FROM tblCustomers
WHERE (((tblCustomers.CustomerName) Like [Forms]![frmEnquiryFor]![txtCompanyName] & "*")) OR (((([tblCustomers].[CustomerName]) Like [Forms]![frmEnquiryFor]![txtCompanyName] & "*") Is Null));"
The final bit of code is just a bit of VBA - "Me!lstCustomer.requery" - that I have tried putting in various places. I have put this code in the "after update" event of txtCompanyName, and this comes close to working. What this does is update the listbox correctly, but only after the user hits the enter key after entering a letter or two. What I want is to find a way to make the listbox update after each keypress.
I've tried putting this requery code in the keypress event, the keyup event, the onchange event, all to no avail. I think the problem may lie in the timing of the event firing, but I'm not sure.
So - any ideas?!?! :confused:
Hello,
I have a form with a text box, a combo and a listbox.
The textbox stores the name of the user.
The combobox gets its data from a query.
I would like that when I open my form, by default the list box will show all the records of a table named Master and then, I would use the combo to requery the list by selecting another user. All records under that criteria, will have to show up in the list box.
Any help? Thank you.
I have a form that has names with a subform with information. The contacts are in a list box and the subform (in datasheet view) shows the phone number/email/etc.. of the selected contact person. I am using the form as a quick look up of a persons information. Before changing it to a list box, it was previously a combo box, and everything worked fine. i was able to requery the subform and the cooresponding info for the person would come up. However, its now a list box and i am having problems with the code to make this happen. I have a different button sending the names selected from the list box to a report...and that works fine, but i am obvisouly missing something to make it work with the subfrm requery. Below is the code i got so far. Any help would greatly be appreciated. its driving me nuts!
Private Sub QuickLookup_Click()
Dim varItem As Variant
Dim strWhere As String
strWhere = "[memberID] = "
For Each varItem In Me.MemberID.ItemsSelected
strWhere = strWhere & Me.MemberID.ItemData(varItem) & " OR [memberID] = "
Next varItem
strWhere = Left(strWhere, Len(strWhere) - 17)
DoCmd.Requery "subfrmqryindividual"
Evening All! (Old enough to remember Dixon of Dock Green (stupid enough to mention it!))
I'm working on a small database for a small team of support workers with a
client base of 60 clients at anyone time, although the turnover is quite
substantial.
I have done some searches on archiving records but am concerned that once
archived a record would be difficult to re-integrate in to the live database,
particularly if there have been changes to it?
I have considered that I may be just as well slapping a big label over every
record that has a date in the [CloseDate] field and if a closed case is
re-opened, the closed date is removed and the label disappears.
I'm still open to being convinced that the archiving is the way to go, but
in the mean time I hope someone will be able to help with the expression
needed in the form on_current procedure to make the label visible. If it was
just a tick box I'd be flying by now, but I can't get my head around getting
a populated [CloseDate] field to initiate the CloseRecordLabel.
Thanks in advance
Doug
can any1 tell me y im missing in my db?
look at Monthstock form...
plz tell me step -by-step how to do it..plz..im new
I have a listbox on a form with several fields, 3 of which are currency fields.When I filter the listbox using afterupdate from a combobox on the same form, the listbox loses the currency format on the fields.
Code:
cboprop_AfterUpdate()
Dim ListFilter As String
ListFilter = "SELECT [qry_inv_form].[inv_no], [qry_inv_form].[prop_ref], [qry_inv_form].[inv_date2], [qry_inv_form].[inv_desc_type], [qry_inv_form].[inv_net], [qry_inv_form].[inv_vat], [qry_inv_form].[inv_total], [qry_inv_form].[year_month], [qry_inv_form].[month_text] " & _
"FROM qry_inv_form " & _
"WHERE [qry_inv_form].[prop_ref] = '" & Me.cboprop & "'"
Me.inv.RowSource = ListFilter
Me.inv.requery
I tried wrapping the fields in Format(fieldname, "Currency") but that came back with a syntax error.
Hi all I have a data input form (Form1) In has various lookups based on input data, then the values are saved to a table. It has a print button to print data on form. It also has a return button (which runs a append and delete qry via a macro ) When the return button is pressed i need to print a different form (Form2) Do i need to lookup the table data with code or can Form2 ? Anyone point me in the right direction
View 2 Replies View RelatedI've been stomping around in the forums for an hour now and I have to ask for some help because I really don't know what it is I am looking for.
I am interested to know if there is a way to write VBA code that reopens my menu form if all other forms have been closed. The database window is hidden in my app and normally when all windows close this will exit Microsoft Access too.
If there's not an easy, established way for this, I'm not really in a spot that requires me to use this, I just wanted to know for future forms.
I guess my real question is how to you build events for the entire database, not just a single form or report?:confused:
Hi.
Is there any way to make a form open up when every thing else is closed.
Can I make a macro that will check if everything else is closed and then open the startup form again?
Is anything like this possible?
Thanks
Richard
Hi all,
I am stumped as to how to get a form to update/refresh. Heres what I have!
My main form:[Daily Log From] is opened, with a subform:[DailyDSQry subform] populated by a Query. This form has a command button that opens another form: [NewDSLog] in "acAdd","acDialog".
What I need is: when the [NewDSLog] form closes, the [DailyDSQry Subform] needs to requery/update so that it displays the new entry.
I have tried the following in a command "CLOSE" button in form [NewDSLog]:
docmd.Runcommand AcCmdRecordSave
Me!Forms![Daily Log]![DailyDSQry subform].Refesh
Me!Forms![DailyDSQry subform].[Query].!Requery
doCmd.close
but no LUCK.....Keep getting errors
Any Ideas
Thanks all, I do appreciate the help
Enviva
I have a DB with 20 forms. All of the forms are closed. I opened a new form and added a button. I would like to do the following when the button is clicked:
Check the "Tag" property of each form and count whichever is not null.
Can anybody help me out??::o
I have two date fields that I am using a form to show the open and close date of an investigation. The opened date field is controlled by a textbox elsewhere on the form, but the date closed is controlled by the vbCalendar control. What I am trying to do in coding is to evaluate whether or not the closed date is before the open date. If the date closed is before the date open I would like a message box to open that prevents the user from moving forward and reminding them that the date closed is earlier than the date open. Is it possible with the vbCalendar option being able to change its focus continually.
View 1 Replies View RelatedI have a remote DB with some Forms. Some forms have commandButtons in them, and some don't.
I have a Table called "test" in my current DB.
I need to look for command buttons in each Form, and populate their names into my "test" table.
Is it possible???
I have a form which is associated with a table. When I put some values in the fields which are connected to the database and try to close the form, it gives me an error that "Can't insert record the primary key might be duplicated"...! and then it closes.
Does the form store a record in the table while closing??
If so is there a way to prevent it??
Please reply..
I am creating a few forms one of which is the MAIN FORM that closes upon opening another form.
What I am looking for is when another form closes, if no other forms are open, then open the MAIN FORM again.
Can I use this : If CurrentProject.AllForms("BUT KEEP THIS EMPTY").IsLoaded Then ???
I would like to have the Switchboard I created open when the database is selected. I used Tools/Startup to set this up. It works to a point. The database window opens and THEN the Switchboard opens (on top of the database window). There are some who I wish not to see the database navigation window). Also, is it possible to OPEN the switchboard again when a Form is closed?
View 1 Replies View Related