hi,
having tested my forms etc and now they all work! i would like to reset all the id numders back to 0 to start from scratch
there are lots of links in the relationships
how do i do that
thank you
steve
I've got an empty pageheader, and a customer group header that repeats on every page. the customer group does not have a footer, and I have a standard agreement paragraph and a signature line in the page footer.
I want to apply a page number to either the top (group header) or bottom (page footer) of my page to reflect the PAGE OF PAGES for the group, not the overall report.
The printed report gets separated into pages for each customer and mailed to them - doesn't make sense to have running page numbers on these - I'd like the customer to be able to see that they're looking at page 2 of 4 of what I mail them, instead of page 202 of 412.
How can I accomplish this?
Sidenote: I ran across a few references to the MS Knowledgebase report samples file (RptSmp00.mdb) during my pre-post answer search. I downloaded - I browsed - I learned a few new tricks. Good stuff.
Slaughter
slaughter at missouri dot edu
I'm having multiple problems with my database like things such as -
i'm currently working on the Query 2 - On the Phone database (ignore Query 1) and i want to search for multiple plot numbers preferably in one parameter prompt with a comma to seperate numbers. (this could be a multitude of numbers so i would like to be able to input as many as needed). Also when i do search on this query since the Criteria is a 'Between' Value i would expect everything between the 2 numbers input to show up - but a lot of numbers out of the range show up too - why is this? (The Numbers are like "69 to 136" and they will show up - but 1-69 and 136-170 would too
I would also like to implement the search results from Query 2 into the Form i currently have made but it just opens up a access table when the search is made?
i cannot link my database as it is too big for the server - But here are the Criteria for Query 2:
Plot No - (criteria = Between [Enter First Plot No:] And [Enter Last Plot No:])
Site - (criteria = Like "*" & [Enter Site:] & "*")
Product - (criteria = Like "*" & [Enter Product:] & "*"
The Query is the one im most concerned about , i can live without a form.
Ok so in excel I have some numbers that are stored as text. The reason being that they are zip codes and some begin with 0 and excel doesn't want numbers to start with 0....so when I import these into an access field that has an input mask for zip codes...will it convert these correctly since the field is a text with input mask?
View 1 Replies View RelatedI have 2 fields that I would like to automate if possible
One field is called "p/o number" and another field called "line no"
These fields are part of an ordering database
Let say I have 200 items to purchase form 10 suppliers
And form example 20 items from each supplier
What I do at present is put the order number on each line item and the line number
example
p/o number line no
1 1
1 2
1 3
2 1
2 2
2 3
2 4
What I want to do is just put the first po number in the required line . Put the first line number in i.e. "1" and the macro will complete all the p/o numbers and line numbers for me as per the ones marked in red.
Example
1 1
2 2
3 3
2 1
2 2
2 3
In my DataBase I want to reset the the records back to the first record. The only way to reset is to exit the form tehn go back in. Is there another way?
Please help this MS Access beginner
Hi,
I have a autonumber function in my form, but i have deleted all the records and want to start again but the autonumber has not reset back to 1, is there a way to do this??
Thanks in advance.
Hi all,
Ive written a program in .net and am currently using an access db as the backend.
In the db I had 200 test records which i deleted to get the db ready for deployment. When i add a new record now the primary key on my "booking" table carries on from the old test number so 201.
Can I resest this so it starts back at #1 as once the db gets updated, the program i wrote then takes the data and updates the accounting system and uses the primary key as the invoice number and so I would like to start at 1.
Thanks in advance
Scott
How can I reset my Tables without affecting the Relationships
ViRi
Hi there....
How can i reset the identity key?
Thanks
Danny
I was in the startup options and unchecked a couple of toolbar boxe and now I dont have a full menu any more.
Please help
I have an inventory split database. It has been working fine. I noticed when I try to enter a new record, it will not let me as it would create a duplicate record. It has actually started to use the autonumbers in the pk again reusing numbers that already exist starting at 1 and moving up sequentially.
How can I make it continue from where it left off or at least not duplicate any of the existing records. This database has many tables with a bunch of relationships.
Thanks!
Bill Hesson :confused:
just a small question. I have a database that assigns a unique 'audit id' to each entry. the ID is in the form of : DEA-[client prefix]-autonumber. Everything is working fine except the autonumber part. I have gaps in the numeric sequence. Ex: DEA-AAA-1, DEA-AAA-2, DEA-AAA-8, DEA-ABC17, etc.
is there a way that I can reset this autonumber so that it may look like this:
Ex: DEA-AAA-1, DEA-AAA-2, DEA-AAA-3, DEA-ABC4, etc.
I'm building a form for a clinic.
Insured patients have deductables and copays that usually reset on January 1st.
To be clear, a deductable of $500 is reduced each time the patient pays, but jumps back to $500 at the beginning of the next year.
The table containing patient records has a deductable field, where the form gets the initial value. I'll be making a running calculation of how much remains after each visit, but that calculation has to start over again each year.
Can anyone suggest code to do this or point me at something similar?
Anyone know how to reset the autonumber for access ? Cox It keep running the number and I just seem can't make it back.
Also if there is some records which mistaken keyin I deleted it keep go for next new number. It would be a waste for that number.
:confused: :confused: :confused:
Is it possible to reset the primary key?
View 3 Replies View RelatedIs it possible to set autonumer to start from 1 again after all records in a database have been deleted?
View 7 Replies View RelatedAccess 2007.. I have a check box in a form that I wish to reset using a command button. How do I achieve this or is there a more efficient way to make this happen?
View 5 Replies View RelatedI have a cumlative DB that exports a file daily based on what was keyed daily..
Therfore, every day I am sending only new records from the DB to a vendor.
I was using autonumber to assign the record number but they now want the record number to restart at 1 for a new days worth of data entry.
So today's file may have record number 1-10 (10 recs) and tomorrow's file would have 11-20 populated om the record number field.
My new record number would have to be 1-10 today and 1-10 tomorrow etc..
Not sure how to do this easily.
thanks!!!
I have two fields
1. Month (date field that shows only the current month only, ex: 04)
2. ItemNumber (created autonumber using =Dmax("ID","Table")+1 to retrieve the number from the previous record)
What I would like to do is everytime the current month changes I want the ItemNumber to reset to one.
I tried an If statement in the on current of the form
If Month <> Date() Then
ItemNumber = 1
Else
ItemNumber = Null
However it resets for every new record created, which by the code makes sense. Is there any way to have do this one time until the change of date or is there another way to go?
I am currently working on a db to handle our FMLA time. I keep a continous form that totals the time used and subtracts that from the starting amount. One year after the time is used their total should grow. I am looking for some code that will not calculate any record that has a date beyond one year from the current date.
View 2 Replies View RelatedHello all, I posted this earlier but got no response, please help!
I have the following event procedure in my Reset button on my form:
Private Sub cmdClearAll_Click()
' Clear All TextBoxes and Set all Check boxes to false (no tick)
Dim ctl As Control
For Each ctl In Me.Controls
If ctl.ControlType = acTextBox Then
ctl.Value = ""
ElseIf ctl.ControlType = acCheckBox Then
ctl.Value = False
End If
Next ctl
Set ctl = Nothing
End Sub
I also have a macro on my execute button which opens another form, Form B, runs the query behind the new form and closes the query.
I noticed that when I open my current form, Form A, click the reset button to clear all the fields and then fill in a few fields or leave the fields blank and then click the Execute button. The query does not run at all and Form B opens up blank with no data populated. Do you know why? But if close the form and reopen it and click the execute button, it works okay? Does anyone know what I am doing wrong?
Please help
Thanks for your help.
I have a form I have created used to inventory items on trailers.
User enters the trailer number, uses labeled checkboxes to indicate items on the trailer. I then added a save button to update the trailer database.
Now what I want it to do is clear all the checkboxes so a new number can be entered an start the process over for a new trailer.
Ive added this command to the save button.
Option Compare Database
Option Explicit
Private Sub save_datta_Click()
On Error GoTo Err_save_datta_Click
DoCmd.DoMenuItem acFormBar, acRecordsMenu, acSaveRecord, , acMenuVer70
Exit_save_datta_Click:
Exit Sub
Err_save_datta_Click:
MsgBox Err.Description
Resume Exit_save_datta_Click
End Sub
Im trying but I am in over my head.
Thanks
I have an unbound form with an option group among several other controls. I also have a "Clear" command button which resets the form and removes any entries in any controls.
How can I reset the value of an option group (with check boxes) so that none of the options are selected? VB does not allow me to assign values to either of the options independently.
Any help is greatly appreciated!
I have a reset button that restores my combo boxes and list boxes to their default values.
I want the 'on click' event on the reset button to first clear all the existing values
before it resets them to their defaults. Does anybody know how can I do this?
The reason i need to know is because, if the user presses reset again, I get an error message because
those values are already inserted in their respective boxes. And since I'm using queries from tables as
the rowsources for these combo and listboxes, I get an error because it will not allow duplicate values.
Yes, it's true that I don't want duplicate values so i just want the values cleared first. , so that the
error doesn't have the chance to occur.
I have this BIG Problem:
I have a form where i use 9 text fields named “Pallet” bound to 9 different tables (each table belongs to each terminal user, I create these tables due I have to perform differents actions and reports by person) i get the max value of each table by model and by user using the DMax function, the key point is to get the Max Value of this 9 fields just like this:
Field (Pallet)#1:108 Field (Pallet)#5:136 Field (Pallet)#9:159
Field (Pallet)#2:109 Field (Pallet)#6:138
Field (Pallet)#3:115 Field (Pallet)#7:132
Field (Pallet)#4:125 Field (Pallet)#8:138
Max Pallet: 159 I got this value creating the follow function...
Public Function fMax(ParamArray Variables())
Dim i As Integer
For i = 1 To UBound(Variables)
If Variables(i) > Nz(fMax) Then
fMax = Variables(i)
End If
Next i
End Function
Based on this i open a controlled field in my form and wrote this function:
= fmax ([Pallet#1]; [Pallet#2]; [Pallet#3]; ...[Pallet#9] )
The BIG QUESTION is how can i reset to zero the criteria in my Dmax function to get the max value of each table??? Due each month the counting needs to be reset to zero because the issue is to get every month the production quantity of cell phones pallets produced, and if I let this function alone, it will give me the max pallet number regardless the month the key is to get the max value according the month…
I try this function but doesn't work:
=DMáx("[Escaneo_Gabriela]![Tarima]","[ Escaneo_Gabriela]"," [Escaneo_Gabriela]![Modelo] = 'G1500S' And Month([Escaneo_Gabriela]![Fecha])=Month(Date()) And Year([Escaneo_Gabriela]![Fecha])=Year(Date())")
I was thinking in open a field in each table named "Month" and create a function or module to give me the value only of the current month based on this field, but i'm not quite sure about the sintax, PLEASE HELP ME>>>!!!!!!!